What Makes Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter Stand Out?
The Norinco SKS, a rugged and reliable rifle, has long been a favorite among shooters for its historical significance and robust design. However, its lack of threaded barrel has always limited customization options. Enter the Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter, a seemingly simple device promising to unlock a world of muzzle device possibilities for this classic firearm.
My journey to finding this adapter stemmed from a desire to modernize my SKS without permanently altering its original configuration. I wanted to explore options for improved muzzle control and perhaps even suppress it down the line. Aftermarket muzzle brakes and flash hiders often require threaded barrels, something my particular Norinco lacked.
Upon receiving the adapter, I was immediately struck by its solid feel and clean black oxide finish. The Infinite Product Solutions adapter appeared to be a well-machined piece of 4140 steel. It definitely had a reassuring heft to it. Compared to other clamp-on or set-screw based adapters I’d seen online, this one seemed to offer a more robust and secure solution.
I initially considered a thread-cutting service for my SKS barrel. The service would have been permanent and more expensive. Ultimately, the Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter’s non-permanent nature and ease of installation swayed my decision.
My first impression was cautiously optimistic. The adapter’s design appeared sound, and the materials seemed to be of good quality. Now I just needed to test it out.
Real-World Testing: Putting Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter to the Test
First Use Experience
I tested the adapter at my local shooting range, a mix of indoor and outdoor lanes allowing for varying lighting and weather conditions. I mounted a simple AK-style slant brake, knowing the M14x1 LH thread would allow for a wide range of options later. The installation was straightforward, requiring only the removal of the front sight and careful tightening of the set screws.
The performance was impressive. The adapter held firmly in place, even after several magazines of rapid fire. There was no noticeable shift in point of impact, and the slant brake did its job in reducing muzzle climb. I also tested it in slightly wet conditions after a light rain; the black oxide finish showed no signs of corrosion, and the grip remained secure.
Initially, I was concerned about the adapter loosening under recoil, but the four set screws provided a surprisingly strong hold. However, I did note that the set screws required tightening after the first 20 rounds.
Extended Use & Reliability
After several months of regular use, the adapter continues to perform admirably. I have put roughly 500 rounds through my SKS with the adapter installed. There are no signs of loosening or damage.
The black oxide finish is holding up well, showing only minor wear marks where the set screws make contact with the barrel. Cleaning is simple; I just wipe it down with a lightly oiled cloth after each range session. It is the same maintenance I perform on the rest of the rifle.
Compared to my previous experiences with other “universal” muzzle adapters, the Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter is a significant upgrade. It offers a much more secure and reliable fit, with no compromise in accuracy or functionality.
Breaking Down the Features of Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter
Specifications
- Manufacturer: Infinite Product Solutions. They have a solid reputation for producing quality adapters and firearm components.
- Color: Black. The black color is a standard matte black finish, blending well with most SKS rifles.
- Finish: Oxide. The oxide finish provides a degree of corrosion resistance.
- Fabric/Material: Steel. The use of steel ensures durability and longevity, crucial for withstanding the stresses of repeated firing.
- Gun Make: Kalashnikov. The adapter is specifically designed for the SKS, which has roots in the Kalashnikov design philosophy.
- Gun Model: AK-47. This is an error, as it is intended for the SKS, not the AK-47; but the threads are AK-patterned.
- Weight: 3.6 oz. The added weight is negligible and doesn’t significantly alter the rifle’s balance.
- Width: 0.81 in. The width ensures a low-profile fit.
- Height: 0.81 in. The height complements the SKS’s existing profile.
- Length: 2.9 in. The length allows for sufficient thread engagement for muzzle devices.
- Caliber: 7.62x39mm. It is specifically designed for the SKS’s caliber.
- Gun Type: Rifle. It is an adapter for rifles.
These specifications are crucial because they directly impact the adapter’s performance and suitability for the SKS. The steel construction, precise dimensions, and appropriate finish all contribute to a secure fit, reliable performance, and long-term durability.
Performance & Functionality
The Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter performs its job remarkably well. It provides a stable and secure platform for mounting various M14x1 LH muzzle devices. The adapter successfully transforms a non-threaded SKS barrel into one capable of accepting modern muzzle attachments.
The adapter’s strengths lie in its robust design and ease of installation. The weakness would be the set screws require some vigilance to ensure they remain tight. It certainly meets my expectations, allowing me to explore different muzzle devices without permanently altering my SKS.
Design & Ergonomics
The adapter’s design is simple yet effective. The Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter is composed of 4140 steel with a black oxide finish. The weight is negligible, and the compact dimensions ensure a streamlined profile.
The installation process is relatively straightforward. However, a basic understanding of firearm disassembly is recommended.
Durability & Maintenance
Given the materials and construction, the adapter should last for many years with proper care. Periodic cleaning and inspection of the set screws are recommended. This will ensure optimal performance and longevity.
Accessories and Customization Options
The adapter itself doesn’t come with any accessories, but it opens the door to a vast array of M14x1 LH muzzle devices. This includes flash hiders, muzzle brakes, compensators, and even suppressors. The use of standard M14x1 LH threads ensures compatibility with a wide range of readily available accessories from various brands. This is a significant advantage, allowing users to customize their SKS to their specific needs and preferences.
Pros and Cons of Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter
Pros
- Provides a non-permanent solution for adding muzzle device compatibility to Norinco SKS rifles.
- Constructed from durable 4140 steel with a black oxide finish for corrosion resistance.
- The adapter is relatively easy to install with basic tools and firearm knowledge.
- Allows for the use of a wide range of readily available M14x1 LH muzzle devices, greatly enhancing customization options.
- Offers a more secure and reliable fit compared to other clamp-on or set-screw based adapters.
Cons
- Requires the removal of the front sight, potentially affecting the original aesthetics of the rifle.
- The set screws may require periodic tightening to maintain a secure fit.
Who Should Buy Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter?
This adapter is perfect for SKS owners looking to modernize their rifle without permanently altering its original configuration. It is great for shooters who want to experiment with different muzzle devices for improved performance or aesthetics. This product benefits those interested in reducing muzzle climb or adding a suppressor (where legal).
This product isn’t for purists who want to keep their SKS in its original, unaltered condition. Nor is it for individuals uncomfortable with basic firearm disassembly and maintenance.
A must-have accessory would be a thread protector for when no muzzle device is mounted. Also, a quality set of gunsmithing screwdrivers is crucial for properly tightening the set screws without damaging them.
Conclusion on Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter
The Infinite Product Solutions Gen 1 Norinco SKS – M14 x 1 LH Slip-On Adapter is a well-designed and effective solution for adding muzzle device compatibility to non-threaded SKS rifles. The adapter’s solid construction, ease of installation, and compatibility with a wide range of accessories make it a worthwhile investment for SKS owners looking to enhance their rifle’s performance and versatility. The price is more than justified, especially compared to the cost and permanence of thread-cutting services.
I would definitely recommend it to anyone looking to unlock the potential of their Norinco SKS. If you’re seeking a non-permanent, reliable, and affordable way to modernize your SKS, this adapter is a fantastic choice. Go ahead and give your old SKS a new lease on life!