What Makes Infinite Product Solutions 11/16in Crush Washer Stand Out?
The Infinite Product Solutions 11/16in Crush Washer is a small but crucial component for firearms chambered in larger calibers. These washers, often overlooked, play a vital role in properly timing muzzle devices and ensuring safe, accurate shooting. I decided to examine this particular crush washer because of my need to correctly install a muzzle brake on my .45-70 lever-action rifle.
Upon receiving the Infinite Product Solutions 11/16in Crush Washer, my initial impression was positive, noting the seemingly robust construction. The black oxide finish lends a professional and durable appearance. While small, the washer seemed precisely machined, and the material felt denser than some cheaper alternatives I’ve encountered.
Compared to generic crush washers, or even those included with some muzzle devices, the Infinite Product Solutions variant appeared more substantial. The finish seemed more resistant to scratching and corrosion than a parkerized washer I had previously used. I chose this one specifically because it listed compatibility with my .45-70, avoiding the uncertainty of a “universal” fit.
My first impression was one of quiet confidence; a small, unassuming part that promised to solve a potentially frustrating problem. It’s not often you get excited about a crush washer, but the initial quality suggests a thoughtful design and manufacturing process. I was eager to see if the Infinite Product Solutions 11/16in Crush Washer lived up to its potential at the range.
Real-World Testing: Putting Infinite Product Solutions 11/16in Crush Washer to the Test
First Use Experience
I tested the Infinite Product Solutions 11/16in Crush Washer at my local outdoor shooting range while installing a new muzzle brake on my Marlin 1895 .45-70. The weather was dry and sunny, typical for a late summer afternoon. The primary purpose was to ensure proper timing of the muzzle brake, directing gases upward to reduce felt recoil.
Installation was straightforward; the crush washer slipped easily onto the threaded barrel. I encountered no issues with threading the muzzle brake onto the washer and torquing it to the correct alignment. The washer deformed smoothly as I tightened the brake, allowing for precise adjustments.
There were no initial surprises, except perhaps the ease with which I achieved proper alignment. Cheaper crush washers can sometimes require excessive force or even crumble before reaching the desired position. This washer provided just enough resistance to time the brake perfectly without feeling like I was forcing it.
Extended Use & Reliability
After several range sessions and roughly 100 rounds of .45-70 fired with the muzzle brake, the Infinite Product Solutions 11/16in Crush Washer is still performing flawlessly. There are no signs of loosening or shifting of the muzzle brake. The black oxide finish remains intact, showing no signs of rust or corrosion.
Despite the intense heat and pressure generated by the .45-70 cartridge, the washer hasn’t shown any signs of deformation beyond the initial crushing during installation. Maintenance is essentially non-existent; I simply clean the muzzle brake as part of my regular firearm maintenance routine.
Compared to my previous experiences with generic washers, the Infinite Product Solutions 11/16in Crush Washer has significantly outperformed them. It’s provided consistent, reliable performance and eliminated the need for constant re-tightening or adjustment. The durability of the finish is also a major improvement, especially considering the harsh environments I sometimes encounter while hunting.
Breaking Down the Features of Infinite Product Solutions 11/16in Crush Washer
Specifications
- Caliber Compatibility: Designed for larger calibers including .44 Rem Mag, .450 Bushmaster, .45-70 Government, and .458 SOCOM. This broad compatibility makes it a versatile option for various firearms.
- Material: Constructed from 304 Stainless Steel. Stainless steel ensures high corrosion resistance and longevity, even in harsh conditions.
- Finish: Features a Black Oxide finish. The black oxide coating provides an additional layer of protection against rust and wear, while also offering a sleek, non-reflective appearance.
- Dimensions: Approximately 1 inch in length and width, with a height of 0.2 inches. These dimensions are optimized for proper crush and alignment without excessive bulk.
- Weight: Weighs a mere 0.064 oz. This minimal weight ensures it doesn’t significantly alter the balance or handling of the firearm.
These specifications are critical for ensuring proper function and longevity. The stainless steel and black oxide finish are paramount for resisting corrosion, especially in humid or marine environments. The dimensions are designed to allow for adequate crushing and timing of muzzle devices without over-stressing the threads on the barrel or the device itself.
Performance & Functionality
The Infinite Product Solutions 11/16in Crush Washer performs its job admirably, ensuring proper timing and secure attachment of muzzle devices. It allows for a full 360-degree rotation during installation, providing ample opportunity to align the device correctly.
The primary strength is its consistent and predictable crushing behavior. This allows for fine-tuning of the muzzle device’s orientation, something that is often difficult to achieve with less precise washers. The only potential weakness is that a crush washer is a single-use item; once crushed, it cannot be reused.
The Infinite Product Solutions 11/16in Crush Washer far exceeded my expectations for such a seemingly simple component. It provided a secure, reliable, and visually appealing solution for mounting my muzzle brake.
Design & Ergonomics
The build quality is excellent, with clean machining and a uniform black oxide finish. The use of 304 stainless steel gives it a substantial feel, despite its light weight.
The design is inherently user-friendly; no special tools or skills are required for installation. The smooth, even crushing behavior makes the installation process predictable and controllable.
Durability & Maintenance
The stainless steel construction and black oxide finish ensure excellent durability and corrosion resistance. With proper installation, the washer should last the lifespan of the muzzle device it’s securing.
Maintenance is virtually non-existent; the washer requires no cleaning or special care after installation. Its inherent corrosion resistance ensures it will withstand harsh environmental conditions without degradation.
Accessories and Customization Options
The Infinite Product Solutions 11/16in Crush Washer doesn’t require any accessories, as it’s a standalone component designed for a specific purpose. It is universally compatible with any muzzle device designed for the specified calibers and thread pitch.
While there are no direct customization options, the black oxide finish can be Cerakoted or otherwise refinished to match the color scheme of the firearm. This allows for a seamless and aesthetically pleasing integration of the muzzle device.
Pros and Cons of Infinite Product Solutions 11/16in Crush Washer
Pros
- Precise Muzzle Device Timing: Provides over 360 degrees of rotation for optimal alignment.
- Exceptional Corrosion Resistance: 304 Stainless Steel with Black Oxide finish ensures long-term durability.
- Wide Caliber Compatibility: Works with .44 Rem Mag, .450 Bushmaster, .45-70, and .458 Socom.
- Easy Installation: Simple and straightforward to install, even for novice users.
- Cost-Effective: Offers excellent performance at an affordable price.
Cons
- Single-Use: Crush washers are designed for one-time use and must be replaced after removal.
- Limited Color Options: Only available in black oxide finish.
Who Should Buy Infinite Product Solutions 11/16in Crush Washer?
The Infinite Product Solutions 11/16in Crush Washer is perfect for:
- Gun owners installing or replacing muzzle devices on firearms chambered in .44 Rem Mag, .450 Bushmaster, .45-70, or .458 SOCOM.
- Hunters and competitive shooters who rely on properly timed muzzle brakes and suppressors for optimal accuracy and recoil reduction.
- Anyone seeking a durable and corrosion-resistant crush washer that provides reliable performance.
Who should skip this product?
- Individuals working with firearms calibers outside the specified compatibility range.
- Those seeking a reusable or adjustable timing solution (a shim kit might be a better alternative).
Must-have accessories or modifications?
- A torque wrench is highly recommended for ensuring proper installation and preventing over-tightening.
- Thread locker (such as Loctite) can be used in conjunction with the crush washer for added security, although it’s not strictly necessary.
Conclusion on Infinite Product Solutions 11/16in Crush Washer
The Infinite Product Solutions 11/16in Crush Washer is a small part that delivers big performance. Its durable construction, precise crushing behavior, and wide caliber compatibility make it an excellent choice for anyone installing or replacing a muzzle device.
At a price of $4.99, the value proposition is outstanding. It provides a reliable and cost-effective solution for ensuring proper timing and secure attachment of muzzle devices.
I would wholeheartedly recommend the Infinite Product Solutions 11/16in Crush Washer to anyone in need of a high-quality, dependable crush washer for their larger caliber firearm. Don’t compromise on this crucial component; invest in the Infinite Product Solutions washer for peace of mind and optimal performance. Get yours today and experience the difference a quality crush washer can make!