Let’s Dive into Presma Skeletonized Rear Pistol Grip for AR-15
The Presma Skeletonized Rear Pistol Grip for AR-15 promises a unique blend of lightweight design and enhanced ergonomics. It distinguishes itself with its aggressive skeletonized styling and aluminum construction, aiming to provide a different feel and look to the ubiquitous AR-15 platform.
I was looking to reduce weight and improve the grip angle on my AR-15 pistol build. I had heard that skeletonized grips, while sometimes controversial in terms of aesthetics, could offer a tangible reduction in overall weight and a potentially more comfortable hold.
Upon unboxing, the Presma Skeletonized Rear Pistol Grip for AR-15 immediately struck me with its aggressive, almost futuristic design. The aluminum felt solid and well-machined, though the overall weight was surprisingly not as dramatically lower than some of my existing polymer grips as I had anticipated.
I was considering a Magpul MOE K2 grip and a BCMGunfighter Mod 3 grip alongside the Presma Skeletonized Rear Pistol Grip for AR-15. Ultimately, I opted for the Presma due to its unique look and the promise of a more vertical grip angle, which I thought would be beneficial for my AR-15 pistol setup. The others are great, but the unique design of the Presma won me over.
My first impression was cautiously optimistic. I was excited by the aesthetic but slightly concerned about how comfortable it would be during extended use.
Real-World Testing: Putting Presma Skeletonized Rear Pistol Grip for AR-15 to the Test
First Use Experience
My first testing ground for the Presma Skeletonized Rear Pistol Grip for AR-15 was at an outdoor shooting range. The weather was sunny and dry, ideal conditions for getting a feel for the grip without any environmental factors interfering.
The grip felt surprisingly secure, despite its skeletonized design. I found the more vertical angle to be immediately beneficial, allowing for a more natural wrist position, particularly when shooting with a brace-equipped AR-15 pistol. It felt natural in my hand.
Initially, there were no immediate issues, although I noticed that the sharp edges of the skeletonized cuts could become slightly uncomfortable after a few magazines. I anticipated this might be something I’d need to address with gloves or some light filing.
Extended Use & Reliability
After several weeks of use, including multiple range trips and a weekend training course, the Presma Skeletonized Rear Pistol Grip for AR-15 has proven to be reasonably durable. There are no signs of cracking or structural failure, though the anodized finish has begun to show some wear around the edges.
The grip has held up well to regular use, though the sharp edges did continue to be a minor annoyance. I added a piece of grip tape to those areas, which significantly improved the comfort.
Maintenance is straightforward; a quick wipe down with a damp cloth is all that’s needed to remove dirt and debris. Compared to some more aggressively textured polymer grips, the Presma Skeletonized Rear Pistol Grip for AR-15 is easier to keep clean. It is very easy to maintain.
It performs adequately, although it doesn’t dramatically outperform other quality grips in terms of pure functionality. The main benefit remains the altered grip angle and weight reduction, but the initial discomfort required some mitigation.
Breaking Down the Features of Presma Skeletonized Rear Pistol Grip for AR-15
Specifications
The Presma Skeletonized Rear Pistol Grip for AR-15 is designed for use with AR-15 and AR-10 platforms. It features a super strong skeletonized aluminum construction for weight reduction and durability.
It includes a screw and hex wrench for easy installation. The manufacturer is Presma, a company known for its AR accessories.
These specifications are important because they dictate the grip’s overall feel, weight, and compatibility with different AR platforms. The aluminum construction suggests a higher level of durability compared to polymer grips, while the included hardware simplifies the installation process. The lighter weight is also welcome.
Performance & Functionality
The Presma Skeletonized Rear Pistol Grip for AR-15 performs adequately in terms of its primary function: providing a secure and ergonomic grip on the firearm. The more vertical grip angle promotes a more natural wrist position, particularly for shorter AR pistols or SBR configurations.
The grip’s strengths lie in its unique aesthetic, weight reduction, and altered grip angle. The weaknesses are the sharp edges that can cause discomfort and the potentially reduced grip surface area compared to traditional grips. The look and feel is different.
It largely meets expectations, providing a unique look and feel, though the initial discomfort required some modifications. It is a solid choice.
Design & Ergonomics
The build quality is decent, with the aluminum being well-machined and the anodized finish providing a degree of protection. The skeletonized design does contribute to a noticeable, albeit not dramatic, weight reduction.
The skeletonized design, while visually appealing, does present a slight ergonomic challenge due to the aforementioned sharp edges. There is a slight learning curve in terms of finding the optimal grip position to avoid these pressure points.
Durability & Maintenance
The aluminum construction suggests good long-term durability, though the finish may show wear over time, as mine has. Proper care includes regular cleaning to remove dirt and debris and occasional inspection for any signs of loosening or damage.
The Presma Skeletonized Rear Pistol Grip for AR-15 is relatively easy to maintain and repair, as it’s a single-piece unit with no moving parts. If the finish becomes excessively worn, it could be refinished with Cerakote or a similar coating.
Accessories and Customization Options
The Presma Skeletonized Rear Pistol Grip for AR-15 comes with the necessary screw and hex wrench for installation. There are no additional accessories included with the grip itself.
It’s compatible with any standard AR-15 lower receiver, and it doesn’t interfere with the use of other accessories such as triggers, safety selectors, or magazine releases. Customization options are limited to adding grip tape or aftermarket finishes.
Pros and Cons of Presma Skeletonized Rear Pistol Grip for AR-15
Pros
- Unique and aggressive skeletonized design adds a distinctive look to any AR-15.
- Lightweight aluminum construction offers a tangible, though not dramatic, weight reduction.
- More vertical grip angle promotes a more natural wrist position, particularly for AR pistols.
- Solid and durable construction suggests good long-term reliability.
- Easy to install with the included screw and hex wrench.
Cons
- Sharp edges on the skeletonized cuts can cause discomfort during extended use.
- Reduced grip surface area may not be ideal for users with larger hands.
Who Should Buy Presma Skeletonized Rear Pistol Grip for AR-15?
The Presma Skeletonized Rear Pistol Grip for AR-15 is perfect for AR-15 enthusiasts who prioritize a unique aesthetic and a more vertical grip angle. It is also well-suited for those building lightweight AR pistol configurations.
Those with particularly large hands or those who prioritize maximum grip surface area should skip this product. If you cannot tolerate even minor discomfort, consider another option.
Must-have modifications include adding grip tape or lightly sanding down any sharp edges. Adding a quality brace can also complement the more vertical grip angle.
Conclusion on Presma Skeletonized Rear Pistol Grip for AR-15
The Presma Skeletonized Rear Pistol Grip for AR-15 offers a unique combination of style, weight reduction, and altered ergonomics. While it’s not without its drawbacks, namely the potentially uncomfortable edges, it provides a distinct alternative to traditional AR-15 grips.
The price is justified for those seeking a unique aesthetic and a more vertical grip angle. However, potential buyers should be aware of the potential need for modifications to improve comfort.
I would personally recommend the Presma Skeletonized Rear Pistol Grip for AR-15 to those looking to customize their AR-15 with a unique and lightweight grip, provided they are willing to address the minor comfort issues. If you are looking for a conversation piece and something different, give it a shot.