ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets Review

First Thoughts on the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets

The world of thermal optics has exploded in recent years, and with it, the need for effective and reliable training tools has grown. Enter the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets, a seemingly simple product promising a significant improvement in thermal weapon sight proficiency. I was intrigued by its potential to bridge the gap between expensive thermal technology and practical, accessible training.

For years, I’ve struggled with effectively training new recruits and even seasoned professionals on thermal optics. The cost of live fire with thermal can be prohibitive. Moreover, creating realistic scenarios that effectively demonstrate the strengths and limitations of thermal imaging has always been a challenge.

Unboxing the kit revealed exactly what you’d expect: two paper targets, each measuring 30″ x 24″ and featuring a coyote silhouette. The targets appeared well-printed, and the paper stock felt sturdy enough to withstand reasonable handling. Compared to standard paper targets, the ATN offering is specifically designed to react to heat, simulating a thermal signature. My initial reaction was cautiously optimistic; I was eager to see if they lived up to the promise.

I’ve used standard B-27 targets and even attempted DIY thermal targets with limited success. These usually involve heating pads and complex setups. The simplicity of the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets is appealing. It theoretically allows for quick and easy deployment, a critical factor when time is a valuable resource.

My first impression was a mix of excitement and healthy skepticism. Could these paper targets truly replicate the experience of using thermal optics? I was ready to find out.

Real-World Testing: Putting ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets to the Test

First Use Experience

My first test of the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets took place at our local range during a training session with a group of law enforcement officers. We set up the targets at varying distances, ranging from 25 to 100 yards, simulating typical engagement distances for our patrol rifles equipped with thermal scopes. We evaluated the targets using ATN Thor 4 thermal scopes, as well as offerings from Pulsar and Trijicon.

Initially, the targets performed as advertised. Applying a heat source – a simple lighter for a few seconds – created a distinct “hot spot” on the target visible through the thermal scopes. It immediately provided a clear aiming point. The effect was noticeable at all distances, although naturally, the clarity decreased at longer ranges. We tested the targets in relatively dry conditions, which yielded the best results.

Ease of use was exceptional. There was no setup required beyond hanging the target. The need to simply apply a brief burst of heat made this convenient for quick drills. We did notice, however, that excessive heat application could damage the target. Also, the effect would dissipate relatively quickly, requiring periodic reapplication.

Extended Use & Reliability

After several weeks of incorporating the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets into our training regimen, I have a better understanding of their long-term reliability and durability. The paper material, while initially sturdy, does show signs of wear and tear after repeated use. This is especially true if the targets are exposed to moisture or high humidity.

The heat-sensitive coating on the targets begins to degrade after numerous applications of heat. This is evident through a gradual reduction in the contrast of the thermal signature. While the targets remain usable, the clarity is diminished. Replacement becomes necessary after approximately 15-20 heat applications.

Maintaining the targets is straightforward: simply store them in a dry environment away from direct sunlight. This helps to prolong their lifespan. Compared to previous training methods using standard targets, the ATN kit offers a more realistic simulation of thermal signatures, although the effect is temporary and requires repeated heat application. The ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets provides an acceptable and cheaper alternative to live fire thermal optic training.

Breaking Down the Features of ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets

Specifications

The ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets is remarkably simple in its specifications, reflecting its intended purpose:

  • Quantity: Two targets per kit.
  • Material: Paper with a heat-sensitive coating.
  • Dimensions: 30 inches x 24 inches.
  • Target Type: Coyote silhouette.

These specifications directly influence the product’s performance. The paper construction keeps the cost down and makes the targets lightweight and easy to handle. The coyote silhouette offers a realistic training scenario for hunters and law enforcement personnel. The heat-sensitive coating is the critical component, as it simulates the thermal signature of a living target.

Performance & Functionality

The primary function of the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets is to provide a visual representation of a heat signature when viewed through a thermal optic. They achieve this by reacting to applied heat, creating a temporary contrast against the cooler background.

The main strength lies in their simplicity and ease of use. The targets offer a cost-effective method for practicing target acquisition and aiming with thermal scopes. The weakness, however, is the temporary nature of the thermal signature. This requires frequent reapplication of heat. Another limitation is that the targets don’t replicate environmental factors that affect thermal imaging, such as atmospheric conditions or terrain.

Overall, the targets meet the basic expectations for a training tool designed to simulate thermal signatures. They offer a functional and affordable solution for familiarizing users with thermal optics.

Design & Ergonomics

The design of the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets is straightforward and functional. The paper construction is lightweight and easy to handle. The coyote silhouette is a common target profile, making it suitable for a variety of training scenarios.

The build quality is adequate for its intended purpose. The paper stock is thick enough to prevent tearing during normal handling. However, it is susceptible to damage from moisture and excessive heat. There is virtually no learning curve involved in using these targets.

Durability & Maintenance

The durability of the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets is limited by their paper construction. The targets will last longer if stored in a dry environment away from direct sunlight.

Maintaining the targets is minimal. Avoid exposing them to moisture or excessive heat, and store them flat to prevent creasing. Repairs are not possible; once the heat-sensitive coating is degraded or the paper is damaged, the target must be replaced.

Accessories and Customization Options

The ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets comes with no additional accessories. Customization is limited to marking the targets with scoring rings or additional aiming points.

The targets are compatible with any thermal optic that operates in the appropriate wavelength range. There are no specific accessories or modifications required for use.

Pros and Cons of ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets

Pros

  • Affordable training solution for thermal optics.
  • Easy to use with minimal setup required.
  • Realistic coyote silhouette for practical training scenarios.
  • Compatible with all thermal scopes.
  • Provides immediate feedback on heat signature visibility.

Cons

  • Temporary thermal signature requires frequent heat application.
  • Paper construction is susceptible to damage from moisture and heat.
  • Limited durability; the heat-sensitive coating degrades over time.


Who Should Buy ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets?

The ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets is perfect for:

  • Hunters who use thermal optics for predator control or hog hunting.
  • Law enforcement officers and military personnel training with thermal weapon sights.
  • Firearms instructors looking for a cost-effective way to introduce thermal optics to students.
  • Anyone seeking to improve their target acquisition and aiming skills with thermal technology without the cost of live animals or complex heating systems.

This product may not be suitable for:

  • Individuals seeking a permanent or long-lasting thermal target solution.
  • Training scenarios that require replicating specific environmental conditions.
  • Users who need a target resistant to extreme weather.

A must-have accessory is a readily available heat source, such as a lighter or small butane torch.

Conclusion on ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets

The ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets offers a practical and affordable solution for training with thermal optics. While the temporary nature of the thermal signature and the limited durability of the paper construction are drawbacks, the simplicity and ease of use make it a valuable tool for hunters, law enforcement, and firearms instructors.

The price of $99.99 is justified by the value it provides in terms of realistic thermal training. It is significantly cheaper than live fire exercises or investing in more complex thermal target systems.

I would personally recommend the ATN Thermal Zero Training Kit Coyote 30″ x 24″ 2 Targets to anyone seeking a cost-effective way to enhance their proficiency with thermal optics. If you’re looking for a quick and easy way to improve your thermal shooting skills, give these targets a try and see the difference they can make in your training. Get yours today and start improving your thermal shooting proficiency!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top