ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets Review

First Thoughts on the ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets

Thermal imaging has revolutionized hunting and tactical operations. The ability to see heat signatures in complete darkness or through obscured environments offers a significant advantage. However, mastering thermal optics requires practice and understanding, something that can be both time-consuming and expensive. That’s where the ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets comes in, offering a cost-effective and readily available means of honing your skills.

I was looking for a way to improve my thermal shooting proficiency without wasting ammunition or spending hours at the range fiddling with settings. The promise of a dedicated thermal training target from a reputable brand like ATN piqued my interest. This kit offered the potential to simulate real-world scenarios and refine my zeroing process.

Upon receiving the package, my initial impression was straightforward. The two 30″ x 24″ paper targets felt sturdy enough for their intended purpose. The boar silhouette design seemed realistic and of sufficient size to represent a viable target at various distances. Compared to simply using standard paper targets, the dedicated thermal design was a huge draw.

I had considered printing my own thermal targets, but the image quality was always subpar and inconsistent. I also looked at some electronic thermal simulators, but the price point was significantly higher. The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets struck a good balance between affordability and functionality.

My first impression was one of cautious optimism. The simplicity of the concept was appealing. I hoped these targets would provide a useful tool in my thermal training regimen, ultimately enhancing my effectiveness in the field.

Real-World Testing: Putting ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets to the Test

First Use Experience

I tested the ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets at my local outdoor shooting range. The range offers a covered area and variable distances up to 200 yards. I set up the targets at 50 and 100 yards to simulate typical hunting scenarios.

The conditions were relatively mild, with a slight breeze and overcast skies. Using my ATN Thor 4 thermal scope, I immediately noticed the distinct thermal signature of the boar silhouette. The image was clear and well-defined, providing a realistic target for zeroing and practice. No specific conditions particularly stood out due to the use case of this product.

The targets were incredibly easy to use. I simply stapled them to a standard target backer and began shooting. After a few initial shots, I was able to make adjustments to my scope and quickly zero in on the bullseye.

There were no significant issues after the first use. The targets performed as expected, providing a clear and consistent thermal signature. One minor surprise was how quickly the paper degraded with multiple bullet holes.

Extended Use & Reliability

After several weeks of consistent use, the ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets have proven to be a valuable training tool. I’ve used them in various weather conditions and at different distances. The targets continue to provide a clear and consistent thermal signature.

The durability is acceptable for paper targets, but repeated use inevitably leads to wear and tear. The paper rips and tears with each shot, especially at closer ranges. To extend their lifespan, I recommend using target pasters to cover bullet holes.

Maintenance is non-existent, as these are disposable targets. Once they are too damaged to use, they are simply replaced. Compared to using standard paper targets, these ATN thermal targets offer a far superior training experience. The dedicated thermal signature allows for more realistic and effective practice, significantly improving my zeroing process.

Breaking Down the Features of ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets

Specifications

  • The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets includes two paper targets. They are each 30 inches wide and 24 inches tall.
  • The material is standard target paper stock. This material is designed to be easily penetrated by bullets.
  • The target features a black boar silhouette. This silhouette is designed to provide a clear thermal signature when viewed through a thermal optic.
  • The kit is designed for thermal optic training. It allows users to practice zeroing and target acquisition with thermal scopes.

These specifications matter because they directly impact the usability and effectiveness of the targets. The size is large enough to represent a realistic target at various distances. The paper material allows for easy scoring and analysis of shot placement. The thermal signature is crucial for providing a clear and distinct image when using thermal optics.

Performance & Functionality

The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets performs its job effectively. It provides a clear and consistent thermal signature for zeroing and target practice. The accuracy is dependent on the user’s skill and the quality of their thermal optic.

The primary strength of these targets is their simplicity and ease of use. They are ready to go straight out of the package and require no special preparation. The main weakness is their limited durability, as they are paper targets and will eventually need to be replaced.

The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets meets expectations. It is a simple, effective, and affordable training tool for thermal optic users.

Design & Ergonomics

The design of the ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets is straightforward and functional. The boar silhouette is realistic and of sufficient size for practical training. The weight is negligible, as they are paper targets.

The targets are exceptionally user-friendly. There is virtually no learning curve. Simply attach the target to a backer and begin shooting.

Durability & Maintenance

The durability of these paper targets is limited. They are designed for single-use or limited repeated use. Maintenance is not required, as they are disposable.

Accessories and Customization Options

The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets does not come with any accessories. There are no customization options available. The targets are designed to be used as is with any compatible thermal optic.

Pros and Cons of ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets

Pros

  • Simple and easy to use. The targets are ready to go right out of the package.
  • Provides a clear and consistent thermal signature. This allows for effective zeroing and target practice.
  • Affordable training tool. It offers a cost-effective way to improve thermal shooting skills.
  • Realistic boar silhouette. It simulates real-world hunting scenarios.
  • Enhances thermal scope proficiency. Consistent use can improve overall accuracy and target acquisition speed.

Cons

  • Limited durability. The paper targets are easily damaged by bullets and require frequent replacement.
  • No accessories or customization options. The kit only includes the paper targets.


Who Should Buy ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets?

The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets is perfect for hunters and tactical shooters who use thermal optics. It is beneficial for anyone looking to improve their zeroing skills and target acquisition speed. It’s also excellent for those new to thermal optics who need a low-cost, low-pressure training environment.

This product is not suitable for individuals who do not own or use thermal optics. It also is not appropriate for those seeking highly durable or reusable targets.

A must-have accessory is a reliable target backer. Also consider target pasters to extend the lifespan of the targets.

Conclusion on ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets

The ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets is a simple yet effective training tool. It provides a clear and consistent thermal signature, allowing users to improve their zeroing skills and target acquisition. While the durability is limited, the affordability and ease of use make it a worthwhile investment for thermal optic users.

The price is justified for the value it provides. It offers a practical and cost-effective solution for thermal training.

I would personally recommend the ATN Thermal Zero Training Kit Boar 30″ x 24″ 2 Targets to any hunter or tactical shooter looking to enhance their thermal optic proficiency. Get yours today and start improving your accuracy in the field!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top