Let’s Dive into Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base
In the world of rifle scopes and mounting solutions, a solid base is as crucial as the optic itself. That’s where the Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base comes into play. Designed for specific Savage rifle models, these bases promise a secure and repeatable mounting platform for your valuable optics, ensuring consistent accuracy and performance in the field.
I was seeking a reliable mounting solution for my older Savage hunting rifle, specifically one that wouldn’t break the bank but still offered the robustness of steel. I needed a base that could withstand the recoil of repeated shots and the occasional bump in the field, something that wouldn’t shift zero after a rough day of hunting. The Warne bases seemed to be a good fit.
Upon receiving the Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base, I was immediately impressed by the heft and solid feel of the steel construction. The finish, a deep matte black (I opted for the matte version), appeared durable and well-applied. They felt like quality components ready to do their job.
Compared to some of the aluminum bases I’ve used in the past, the Warne steel bases offered a noticeable increase in perceived strength. I had considered a one-piece Picatinny rail, but for my specific application, I preferred the lower profile and classic look of the two-piece bases, prioritizing a clean aesthetic without sacrificing functionality. I picked the Warne over similarly priced aluminum options due to steel’s inherent durability and resistance to deformation.
My first impression was positive, even bordering on relief. The Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base appeared to be a well-made, robust mounting solution, and I was eager to get them installed and test them out on the range.
Real-World Testing: Putting Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base to the Test
First Use Experience
I initially tested the Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base at my local shooting range, mounting a trusted Leupold VX-3 scope on my Savage .30-06. I focused on zeroing the rifle and shooting groups at 100 yards to assess the base’s impact on accuracy. The weather was mild, with a slight breeze, providing favorable conditions for testing.
The bases performed admirably under moderate recoil. There was no noticeable shift in zero after multiple rounds. The scope remained firmly in place.
Installation was straightforward, requiring only basic tools and a little bit of gunsmithing know-how. The bases aligned perfectly with the receiver’s mounting holes, and the included screws tightened securely. No issues arose during the mounting process, but it’s worth ensuring you have the correct torque specifications for your rifle.
After the first range session, I found no issues with the Warne bases. The scope was held securely, and my initial zero remained consistent.
Extended Use & Reliability
After several months of use, including multiple range sessions and a deer hunting trip in the mountains, the Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base have held up exceptionally well. The bases show no signs of wear and tear, and the finish remains intact despite exposure to harsh weather conditions. There has been no shift in zero, demonstrating their reliable performance.
The bases are extremely durable. They show absolutely no signs of rust or corrosion, despite being subjected to rain and snow during my hunting trip.
Maintaining the Warne bases is simple. I just wipe them down with a lightly oiled cloth after each use to remove any dirt or moisture. Minimal effort ensures they stay in excellent condition.
Compared to a previous aluminum base I used on another rifle, the Warne steel bases offer a noticeably more secure and stable platform. I have complete confidence in their ability to withstand the rigors of hunting and range shooting. These bases definitely outperform my previous experiences.
Breaking Down the Features of Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base
Specifications
The Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base features:
- Precision CNC Machined Steel: Manufactured from solid steel, offering exceptional strength and durability. This ensures the bases can withstand significant recoil and resist deformation over time.
- Maxima Steel Scope Base Design: Modeled after the Weaver Scope Mount pattern, providing a wide range of ring compatibility. This makes it easy to find suitable scope rings for your chosen optic.
- Low Profile Design: Allows the use of iron sights when the scope is removed. This provides versatility, enabling shooters to switch between optics and iron sights as needed.
- Full Width Recoil Slot: Ensures maximum bearing surface for recoil key engagement on Warne rings. This helps to prevent scope slippage and maintain zero, especially with magnum calibers.
- Available in Matte and Gloss Finishes: Provides options to match the finish of your rifle and scope. The finish protects against corrosion and adds to the overall aesthetic appeal.
- Specific Fit for CIL 950 and 950C Savage Rifles: Ensures proper alignment and secure mounting on these specific models. This provides optimal performance and accurate shooting.
These specifications are important because they contribute to the overall accuracy, reliability, and durability of your rifle’s optics mounting system. A solid steel base, precisely machined and securely attached, is essential for maintaining zero and ensuring consistent performance in the field.
Performance & Functionality
The Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base performs its job flawlessly. It provides a solid, stable platform for mounting a rifle scope, ensuring consistent accuracy and reliable zero retention.
The primary strength lies in the robust steel construction, which provides superior strength and resistance to recoil compared to aluminum bases. A potential area for improvement might be the inclusion of more detailed installation instructions.
The bases meet and exceed expectations. They deliver on their promise of providing a reliable and durable mounting solution for Savage rifles.
Design & Ergonomics
The build quality is exceptional. The Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base is made from solid steel, and the finish is durable and well-applied. The weight is slightly higher than aluminum bases, but the added strength is worth the trade-off.
These bases are user-friendly. The installation process is straightforward, and no special tools are required.
Durability & Maintenance
These bases are built to last. The steel construction and durable finish ensure years of reliable performance.
These are very easy to maintain and repair, though repair is unlikely to ever be necessary. Routine cleaning is all that’s needed to keep them in top condition.
Accessories and Customization Options
The Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base is designed to work with a wide range of scope rings that adhere to the Weaver standard. Warne themselves offers a full line of compatible rings.
The bases are compatible with most Weaver-style scope rings from other brands, providing flexibility in choosing your preferred mounting hardware. Warne Maxima QD Rings can be paired with these bases for quick scope removal while still retaining zero.
Pros and Cons of Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base
Pros
- Solid Steel Construction: Provides exceptional strength and durability for reliable performance.
- Precise CNC Machining: Ensures accurate fit and secure mounting on specific Savage rifle models.
- Low Profile Design: Allows for the use of iron sights when the scope is removed, offering versatility.
- Weaver Style Compatibility: Works with a wide range of scope rings, providing flexibility in mounting options.
- Affordable Price: Offers excellent value for money compared to other steel bases on the market.
Cons
- Slightly Heavier Than Aluminum: The steel construction adds some weight to the rifle, which may be a consideration for some shooters.
- Limited to Specific Savage Models: The bases are only compatible with CIL 950 and 950C Savage rifles.
Who Should Buy Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base?
These bases are perfect for hunters and recreational shooters who own CIL 950 or 950C Savage rifles and are looking for a durable and reliable mounting solution for their scopes. They are an excellent choice for anyone who values strength, accuracy, and affordability in their optics mounting system.
Someone who prioritizes lightweight over ultimate durability might skip this product. Those who own rifles other than the CIL 950 or 950C Savage models will obviously need to seek other mounting solutions.
Must-have accessories include a set of quality Weaver-style scope rings and a torque wrench to ensure proper screw tension during installation.
Conclusion on Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base
In summary, the Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base is a fantastic option for Savage rifle owners seeking a robust and reliable scope mounting solution. The solid steel construction, precise machining, and affordable price make it an excellent value.
The price is absolutely justified by the quality and performance of these bases. They offer a level of durability and reliability that is difficult to find at this price point.
I would personally recommend the Warne Rifle scope CIL 950 and 950C 2 Pc Steel Base to anyone looking for a solid and dependable mounting solution for their CIL 950 or 950C Savage rifle. It’s a simple and affordable upgrade that will enhance your shooting experience. If you own one of the specified Savage rifles and need a scope base, this is a no-brainer. Get yours today and experience the difference a quality base can make.