SME Gong 9.5″ NM500 Steel with Stand Review

First Thoughts on the SME Gong 9.5″ NM500 Steel with Stand

The SME Gong 9.5″ NM500 Steel with Stand promises a convenient and durable target solution for various calibers. It’s a straightforward design: a 9.5-inch gong made from NM500 steel, known for its resistance to impacts, paired with a stand for easy setup. It presents an enticing option for shooters looking to move beyond paper targets and enjoy the immediate feedback of a steel gong.

I needed a reactive target system that was portable and could handle a variety of pistol and rifle calibers for training purposes. My old setup of hanging steel plates from chains was cumbersome and took too long to set up. The SME Gong 9.5″ NM500 Steel with Stand appeared to offer a quicker, simpler, and more contained solution.

Upon unboxing, I was initially impressed by the heft of the gong itself. The NM500 steel felt substantial, suggesting a good level of durability. The stand, however, felt a bit lighter and less robust than I had hoped, raising immediate concerns about its long-term resilience.

Compared to other steel targets I’ve used, like AR500 gongs suspended from chains, this SME offering aimed for convenience over ultimate ruggedness. I also considered self-healing polymer targets, but they lack the satisfying ring and immediate visual feedback of steel. I chose this SME gong for its promise of balance between portability, durability, and instant feedback, all at a budget-friendly price of $40.49.

My first impression was cautiously optimistic. The gong itself seemed capable, but the stand appeared to be the weak link. I was eager to get to the range and see how it performed under real-world conditions.

Real-World Testing: Putting SME Gong 9.5″ NM500 Steel with Stand to the Test

First Use Experience

I took the SME Gong 9.5″ NM500 Steel with Stand to my local outdoor shooting range. It was a sunny day with a slight breeze, ideal conditions for testing. I set the target up at approximately 50 yards and started with 9mm pistol rounds.

The setup was indeed easy – the stand’s legs pushed into the ground without much effort, and the gong hung securely. Initial shots with the 9mm produced a satisfying ring, confirming the steel’s reactive qualities. After about 50 rounds, I moved on to .223 rifle rounds. The gong handled these with ease as well, producing a louder thwack and slight movement of the target. However, after several .223 rounds, I noticed the stand wobbling a bit more with each impact.

Extended Use & Reliability

After several weeks of use, the SME Gong 9.5″ NM500 Steel with Stand has shown both strengths and weaknesses. The NM500 steel gong itself is holding up remarkably well. There are no dents, deformations, or signs of significant wear, even after repeated impacts from various calibers.

The stand, however, has proven to be less durable. As others have noted, it is definitely the weak point of this system. After only a few range sessions, one of the stand’s legs began to bend from the repeated impacts and ground vibrations. I tried reinforcing it with some metal stakes, but this only provided a temporary fix. Cleaning is simple – just wipe down the gong with a cloth to remove any bullet splatter.

Compared to my previous experience with hanging AR500 steel targets, the SME gong offers much greater portability and quicker setup. However, the hanging targets proved far more durable over the long term due to the heavy-duty chains used for suspension. While the SME Gong 9.5″ NM500 Steel with Stand provided a fun, reactive shooting experience, I question the longevity of the included stand.

Breaking Down the Features of SME Gong 9.5″ NM500 Steel with Stand

Specifications

  • Manufacturer: SME
  • Target Type: Gong
  • Size: 9.5 inches
  • Material: NM500 Steel
  • Ammo Type: All Rifle / Handgun (excluding armor-piercing rounds)
  • Quantity: 1

The 9.5-inch size offers a good balance between visibility and challenge at various distances. NM500 steel is known for its high hardness and impact resistance, allowing it to withstand repeated hits from pistol and rifle rounds without significant damage. The advertised compatibility with “All Rifle / Handgun” ammo types suggests a versatile target, but users should be cautious about using high-powered or armor-piercing rounds, as one user’s experience warns against .50 caliber rounds.

Performance & Functionality

The SME Gong 9.5″ NM500 Steel with Stand performs its primary function – providing reactive target feedback – admirably. The loud ring upon impact is satisfying and makes it easy to confirm hits, even at longer distances. The gong’s ability to handle various calibers without deformation is a significant strength.

The stand’s functionality, however, is a major weakness. It’s flimsy construction and inability to withstand repeated impacts detracts significantly from the overall experience. While the gong meets expectations, the stand falls short.

Design & Ergonomics

The gong itself is a simple, effective design. Its circular shape ensures consistent impact distribution, and the pre-drilled hole allows for easy attachment to the stand. The stand’s design is less impressive. It uses a basic tripod configuration, which offers minimal stability, particularly on uneven ground.

The lightweight nature of the stand makes it easy to transport, but this comes at the cost of durability. There is minimal user adjustment required, making setup easy.

Durability & Maintenance

The gong’s NM500 steel construction suggests a long lifespan, even with frequent use. As previously mentioned, the stand is the limiting factor in terms of durability.

Maintenance is minimal: simply wipe down the gong after use to remove bullet fragments and residue. The stand may require occasional straightening or reinforcement, depending on the level of use and the types of ammunition used.

Accessories and Customization Options

The SME Gong 9.5″ NM500 Steel with Stand comes with a basic stand and some target stickers. There are no included customization options.

Users could potentially replace the stand with a more robust option made from heavier-gauge steel or a more stable tripod design. The gong itself could be painted with different colors for improved visibility, but this would require periodic re-painting due to bullet impacts. The gong is compatible with any stand that can support its weight and has a suitable mounting point.

Pros and Cons of SME Gong 9.5″ NM500 Steel with Stand

Pros

  • Satisfying audible feedback upon impact.
  • NM500 steel construction offers excellent durability for the gong itself.
  • Easy and quick setup and takedown.
  • Portable and lightweight design, especially the gong.
  • Relatively inexpensive compared to other steel target systems.

Cons

  • The included stand is flimsy and prone to bending and damage.
  • Target stickers are low quality and easily ripped off upon impact.
  • Limited stability, especially on uneven ground.


Who Should Buy SME Gong 9.5″ NM500 Steel with Stand?

The SME Gong 9.5″ NM500 Steel with Stand is perfect for casual shooters who want an affordable and portable steel target system for pistol and low-caliber rifle practice. It is also suitable for those who are willing to upgrade the stand to a more durable option. New shooters benefit from the quick feedback provided by the gong, which enhances the shooting experience.

Those who primarily shoot high-powered rifles or expect extreme durability should skip this product. Competitive shooters may find the stand too unstable for serious training. Someone who shoots .50 caliber firearms should definitely look for a more robust target.

A must-have modification is replacing the included stand with a sturdier one. Investing in high-quality spray paint will also help maintain visibility.

Conclusion on SME Gong 9.5″ NM500 Steel with Stand

The SME Gong 9.5″ NM500 Steel with Stand presents a mixed bag. The NM500 steel gong itself is a durable and effective target, providing satisfying feedback and withstanding repeated impacts. However, the included stand is a significant weak point, limiting the overall value and longevity of the product.

At a price of $40.49, the gong itself is a good value, but the stand detracts from the overall package. The price is justified for the gong alone, especially if you plan to upgrade the stand.

I would cautiously recommend this product if you are aware of the stand’s limitations and are prepared to replace it. It offers a fun and reactive shooting experience at an affordable price, but the flimsy stand is a significant compromise. Consider purchasing the gong separately and investing in a better stand for a more reliable and long-lasting setup. Don’t wait – upgrade your range day with a reactive steel target, but be prepared to invest in a more robust stand!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top