First Impressions of Leupold DeltaPoint Pro Low Profile Picatinny Mount
The Leupold DeltaPoint Pro is a proven red dot sight, known for its ruggedness and clarity. While typically seen topping pistols, its versatility extends to shotguns and AR platforms. To unlock this potential, Leupold offers the Leupold DeltaPoint Pro Low Profile Picatinny Mount, allowing shooters to confidently mount the optic on any firearm sporting a MIL-STD-1913 Picatinny rail.
For years, I’ve struggled to find a red dot mounting solution for my AR that offered a truly low profile without sacrificing zero retention. Many mounts felt bulky or prone to loosening under recoil. The promise of a Leupold-engineered solution for the DeltaPoint Pro on a Picatinny rail immediately piqued my interest.
Unboxing the mount revealed a simple, yet robust design. The black matte finish and precisely machined aluminum construction exuded quality. The weight, a mere 1.55 oz, was surprisingly light; this signaled no unnecessary bulk would be added to my rifle.
I considered a few other options, including some aftermarket mounts claiming similar features. However, Leupold’s reputation for quality and their commitment to the DeltaPoint Pro ecosystem swayed my decision. I also favored a dedicated low-profile mount versus an adapter plate on top of a riser.
My first impression was one of quiet confidence. The Leupold DeltaPoint Pro Low Profile Picatinny Mount appeared to be a well-engineered solution that prioritized both form and function, hinting at a secure and reliable platform for my DeltaPoint Pro.
Real-World Testing: Putting Leupold DeltaPoint Pro Low Profile Picatinny Mount to the Test
First Use Experience
My initial testing took place at my local outdoor shooting range, mounting the DeltaPoint Pro on my AR-15 pistol. The mounting process was straightforward, securing the mount to the Picatinny rail and then attaching the DeltaPoint Pro to the mount. I brought it to the range on a slightly overcast day with temperatures in the mid 60s.
The low profile was immediately noticeable; the DeltaPoint Pro sat snugly on the receiver, barely adding any height to the sight picture. During my first magazine, the zero remained rock solid. The lightweight aluminum made for minimal impact on the balance of the rifle.
After about 50 rounds, I did notice the mounting screw on the optic had loosened slightly. A quick re-tighten solved the problem, but highlighted the need for thread locker.
Extended Use & Reliability
After several months of use, including multiple range trips and a carbine course, the Leupold DeltaPoint Pro Low Profile Picatinny Mount has proven its worth. The mount continues to hold zero consistently, even after hundreds of rounds and some accidental bumps and scrapes.
The black matte finish has held up well, showing only minor signs of wear on the edges. Cleaning is easy; a quick wipe down with a solvent-dampened cloth removes any residue. I’ve had no need to disassemble the mount for cleaning.
Compared to previous, less expensive mounts I’ve used, the Leupold mount is a clear winner. It provides a more secure and stable platform for the DeltaPoint Pro, contributing to improved accuracy and confidence. I have also enjoyed the weight savings.
Breaking Down the Features of Leupold DeltaPoint Pro Low Profile Picatinny Mount
Specifications
- The Leupold DeltaPoint Pro Low Profile Picatinny Mount is designed to securely attach a Leupold DeltaPoint Pro to any firearm with a MIL-STD-1913 Picatinny rail. This provides a stable and reliable platform for the red dot sight.
- The mount is constructed from lightweight and durable aluminum, ensuring it can withstand the rigors of field use without adding excessive weight to the firearm. The aluminum construction is essential for durability and heat dissipation.
- It features a black matte finish for a low-profile appearance and corrosion resistance. This is helpful to reduce glare and reflections that may affect the shooter’s sight picture.
- The mount weighs just 1.55 oz, minimizing the impact on the firearm’s overall balance and handling. This lightweight design is crucial for maintaining maneuverability.
- The mount provides a 0 MOA cant, ensuring the DeltaPoint Pro sits parallel to the Picatinny rail. This allows for maximum elevation adjustment within the optic itself.
Performance & Functionality
The Leupold DeltaPoint Pro Low Profile Picatinny Mount performs its job exceptionally well. It provides a rock-solid and repeatable mounting platform for the DeltaPoint Pro, leading to consistent accuracy.
The primary strength is its unwavering ability to maintain zero, even under heavy recoil and rough handling. It meets expectations by creating a secure and low-profile system to mount a red dot sight.
One area for potential improvement could be the inclusion of pre-applied thread locker on the mounting screws. This would provide an added layer of security against loosening.
Design & Ergonomics
The build quality of the Leupold DeltaPoint Pro Low Profile Picatinny Mount is outstanding. The aluminum is precisely machined and the black matte finish is evenly applied. The mount feels solid and well-made.
The low-profile design is a major ergonomic benefit. The height-over-bore is kept to a minimum, allowing for a more natural cheek weld and improved target acquisition. The design is simple and intuitive, requiring no special tools or skills for installation.
Durability & Maintenance
The aluminum construction and robust design suggest that the mount will last for many years with proper care. The finish appears to be durable and resistant to scratches and corrosion.
Maintenance is minimal; occasional cleaning with a brush and solvent is all that’s required to keep the mount in good condition. The simple design makes it easy to inspect and clean.
Accessories and Customization Options
The Leupold DeltaPoint Pro Low Profile Picatinny Mount is specifically designed for the Leupold DeltaPoint Pro red dot sight and any firearm that features a MIL-STD-1913 Picatinny rail. It is not compatible with other red dot sights without additional adapters.
No additional accessories are required for installation, although thread locker is highly recommended to secure the mounting screws. The mount does not offer any inherent customization options beyond its primary function of attaching the DeltaPoint Pro.
Pros and Cons of Leupold DeltaPoint Pro Low Profile Picatinny Mount
Pros
- Rock-solid Mounting Platform: Ensures zero retention under heavy recoil and rough handling.
- Low-Profile Design: Minimizes height-over-bore for a more natural cheek weld.
- Lightweight Aluminum Construction: Adds minimal weight to the firearm.
- Durable Black Matte Finish: Provides corrosion resistance and a low-profile appearance.
- Easy Installation: Requires no specialized tools or skills.
Cons
- Requires thread locker (not included) for optimal screw retention.
- Limited to Leupold DeltaPoint Pro compatibility without adapters.
Who Should Buy Leupold DeltaPoint Pro Low Profile Picatinny Mount?
The Leupold DeltaPoint Pro Low Profile Picatinny Mount is perfect for AR platform enthusiasts, tactical shooters, and hunters who want to mount a Leupold DeltaPoint Pro red dot sight on their rifle or shotgun. It is ideally suited for those who prioritize a low-profile, lightweight, and extremely durable mounting solution.
This mount is not ideal for those who want a universal red dot mount that can accommodate multiple optics. Users with other red dot sights should skip this product unless they plan on switching to a DeltaPoint Pro.
A must-have accessory is a high-quality thread locker compound, such as Loctite, to ensure the mounting screws remain secure under recoil.
Conclusion on Leupold DeltaPoint Pro Low Profile Picatinny Mount
The Leupold DeltaPoint Pro Low Profile Picatinny Mount is a well-engineered and thoughtfully designed accessory that delivers on its promise of providing a secure, low-profile mounting solution for the Leupold DeltaPoint Pro. The mount’s rugged construction and unwavering ability to maintain zero make it a worthy investment for serious shooters.
The price of $109.99 is justified by the mount’s quality, performance, and the peace of mind it provides. It is a small price to pay for the confidence of knowing that your optic is securely attached and will hold zero under any conditions.
I would wholeheartedly recommend the Leupold DeltaPoint Pro Low Profile Picatinny Mount to anyone looking to mount a DeltaPoint Pro on their rifle or shotgun. If you value reliability, durability, and a low-profile design, this mount is an excellent choice. Upgrade your setup today!