First Thoughts on the SME RSR RIFLE STOCK RISER
The SME RSR RIFLE STOCK RISER from SME promises a simple solution to a common problem: achieving proper cheek weld on a rifle. A good cheek weld is critical for consistent accuracy, allowing your eye to align perfectly with the scope or sights. This neoprene riser aims to provide that proper alignment without breaking the bank.
My journey to this product started with a new scope on an old rifle. The scope sat higher than the original iron sights, and I found myself craning my neck uncomfortably to get a clear sight picture. I considered expensive adjustable stocks, but the SME RSR RIFLE STOCK RISER offered a potentially cheaper and faster solution.
Upon receiving the riser, the first thing I noticed was its simplicity. It’s a piece of neoprene, plain and simple. The material felt durable enough, but it certainly didn’t scream “high-end.” Compared to something like a Magpul cheek riser or a stock with an integrated adjustable cheek piece, the SME offering seemed almost rudimentary.
I chose the SME RSR RIFLE STOCK RISER because I wanted an affordable, non-permanent solution. Alternatives like fully adjustable stocks are great but can be overkill (and over budget) for a rifle I primarily use for casual range days. My first impression was cautiously optimistic; I hoped this simple piece of neoprene could actually make a difference.
Real-World Testing: Putting SME RSR RIFLE STOCK RISER to the Test
First Use Experience
My first test of the SME RSR RIFLE STOCK RISER was at my local outdoor shooting range. The weather was clear and sunny, a perfect day for zeroing in my newly mounted scope. I attached the riser to my rifle stock following the (rather minimal) instructions; it was essentially just slipping it over the stock.
Initially, the riser felt a little awkward. The added height definitely improved my cheek weld, bringing my eye more in line with the scope, but the neoprene felt a bit squishy. However, after a few shots, I adjusted my grip and found a comfortable position.
No immediate issues arose, but I did notice that the riser tended to shift slightly after each shot. This wasn’t a huge problem, but I had to readjust it occasionally.
Extended Use & Reliability
After several weeks of using the SME RSR RIFLE STOCK RISER, I have a better sense of its long-term viability. It has held up surprisingly well, showing no significant signs of wear and tear. The neoprene hasn’t cracked or torn, despite being exposed to sun and the occasional light rain.
Maintenance is practically nonexistent; I simply wipe it down with a damp cloth after each range session. Compared to more elaborate cheek risers that require tools for adjustment, the SME is incredibly low-maintenance. In terms of performance, it continues to provide adequate cheek weld enhancement, though the shifting issue remains.
Overall, the SME RSR RIFLE STOCK RISER hasn’t blown me away, but it has proven to be a functional and inexpensive solution. It doesn’t outperform more expensive options, but it delivers on its basic promise.
Breaking Down the Features of SME RSR RIFLE STOCK RISER
Specifications
- Type: Riser. The SME RSR RIFLE STOCK RISER is designed to elevate the shooter’s cheek to achieve a proper sight alignment.
- Material: Neoprene. This provides a degree of cushion and grip.
- Finish: Neoprene. The finish is a simple, untextured neoprene.
The simple specifications matter because this product is all about function over form. The neoprene material offers some padding and grip which helps to maintain consistent cheek placement.
Performance & Functionality
The SME RSR RIFLE STOCK RISER performs its primary function: raising the cheek weld. It provides adequate height for many scopes and rifles, improving sight alignment. However, its simplistic design also presents weaknesses.
The lack of adjustability means it might not be ideal for every shooter or every scope setup. Also, the tendency to shift can be frustrating. The riser meets basic expectations but lacks refinement.
Design & Ergonomics
The design is incredibly basic: a sleeve of neoprene that slides over the rifle stock. The build quality is adequate for the price; the neoprene seems durable enough to withstand regular use. However, the lack of padding or shaping can make it less comfortable than more ergonomic options.
There’s essentially no learning curve; you just slip it on and go. The simple design makes it easy to install, but it doesn’t offer much in the way of customization.
Durability & Maintenance
Given that it’s just a piece of neoprene, the SME RSR RIFLE STOCK RISER should last a reasonably long time. There are no moving parts to break, and the material is resistant to tearing and abrasion.
Maintenance is minimal. Simply wipe it clean with a damp cloth.
Accessories and Customization Options
The SME RSR RIFLE STOCK RISER comes with no accessories. Customization is limited to potentially adding some padding underneath the riser for increased height or using tape to secure it more firmly to the stock. It is universally compatible with most rifle stocks, but might not fit well on very narrow or oddly shaped stocks.
Pros and Cons of SME RSR RIFLE STOCK RISER
Pros
- Affordable: The SME RSR RIFLE STOCK RISER is one of the most budget-friendly cheek risers on the market.
- Simple to install: Installation is quick and easy; no tools are required.
- Durable material: Neoprene is relatively durable and weather-resistant.
- Improves cheek weld: Effectively raises the cheek weld for better sight alignment with many optics.
- Low maintenance: Easy to clean and requires no special care.
Cons
- Lacks adjustability: The height is fixed and cannot be adjusted.
- Can shift during use: The neoprene sleeve can move around on the stock after repeated shots.
- Basic design: The overall design is simple and lacks advanced ergonomic features.
Who Should Buy SME RSR RIFLE STOCK RISER?
The SME RSR RIFLE STOCK RISER is perfect for casual shooters, budget-conscious individuals, and those seeking a simple, non-permanent solution to improve their cheek weld. It’s also suitable for rifles with standard stock shapes.
This product should be skipped by competitive shooters, those requiring precise cheek weld adjustments, or individuals with oddly shaped rifle stocks. A must-have modification would be some adhesive neoprene to prevent slippage or additional padding for increased height.
Conclusion on SME RSR RIFLE STOCK RISER
The SME RSR RIFLE STOCK RISER is a basic, no-frills product that delivers on its core promise: improving cheek weld for better sight alignment. It’s not fancy, and it has its limitations, but its affordability and ease of use make it a worthwhile option for many shooters.
The price is certainly justified; at around $13, it’s hard to argue with the value. I would recommend the SME RSR RIFLE STOCK RISER to anyone looking for a simple and inexpensive way to enhance their shooting experience. If you’re tired of craning your neck to see through your scope, give the SME RSR RIFLE STOCK RISER a try – you might be pleasantly surprised! Get yours today!
