First Impressions of TANDEMKROSS Magazine Release Spring
The TANDEMKROSS Magazine Release Spring for the Ruger 10/22 promises enhanced magazine retention, especially for those of us who’ve upgraded to higher-capacity magazines like the BX-25. TANDEMKROSS aims to solve a common frustration: factory springs that simply aren’t up to the task of reliably holding heavier magazines. This simple upgrade boasts improved spring force and long-lasting durability.
I’ve been running a 10/22 build for years, primarily for small game hunting and casual target practice. The standard 10-round magazines work fine, but I inevitably ended up switching to BX-25 magazines for the added convenience. However, I immediately noticed that my magazines weren’t seating as securely, and occasionally I experienced a magazine dropping unexpectedly – a major annoyance and a potential safety hazard.
The TANDEMKROSS Magazine Release Spring arrived in a simple, no-frills package. Upon opening, I was immediately impressed by the spring’s robust feel and the quality of the black steel finish. The spring itself felt significantly stronger than the factory spring I removed from my 10/22.
Compared to other aftermarket 10/22 springs, the TANDEMKROSS offering seemed to prioritize durability and reliable function over flashy coatings or exotic materials. I was initially drawn to a competitor offering a spring made from titanium, but ultimately chose the TANDEMKROSS spring due to its reputation for consistent performance and positive user reviews emphasizing its increased spring strength. My primary concern was reliability, and the TANDEMKROSS Magazine Release Spring seemed like the safer bet.
My initial impression was one of cautious optimism. The spring felt solid and well-made, and I was eager to see if it lived up to its promise of improved magazine retention. I was hoping for a reliable, no-nonsense upgrade that would eliminate the frustration of magazines dropping unexpectedly.
Real-World Testing: Putting TANDEMKROSS Magazine Release Spring to the Test
First Use Experience
I first tested the TANDEMKROSS Magazine Release Spring at my local outdoor shooting range. I installed the spring in my Ruger 10/22 and ran through several magazines, both standard 10-round and BX-25 models. The installation process was straightforward, taking only a few minutes.
The difference was immediately noticeable. The magazines clicked into place with a much more positive and secure feel. There was no hint of wobble or looseness, and I felt confident that they were properly seated. I also noticed that magazine release was slightly stiffer, requiring a bit more force to actuate – a trade-off I was willing to accept for improved retention.
During my initial range session, I fired approximately 200 rounds through various magazines. I intentionally bumped and jostled the rifle to simulate field conditions. The TANDEMKROSS Magazine Release Spring performed flawlessly, with no magazine drops or feeding issues.
Extended Use & Reliability
After several months of regular use, the TANDEMKROSS Magazine Release Spring continues to perform admirably. I’ve used it in various conditions, including hot, dry summer days and cold, damp autumn mornings. The spring has consistently provided reliable magazine retention regardless of the environment.
I’ve noticed no signs of wear and tear on the spring. The black finish remains intact, and the spring tension feels just as strong as when it was first installed. I perform a basic cleaning and lubrication of my 10/22 after each range session, but the TANDEMKROSS Magazine Release Spring requires no special maintenance.
Compared to my previous experience with the factory spring, the TANDEMKROSS upgrade is a significant improvement. The factory spring was always a weak point in my 10/22 setup, especially after switching to higher-capacity magazines. The TANDEMKROSS Magazine Release Spring has eliminated this problem, providing reliable and consistent magazine retention.
Breaking Down the Features of TANDEMKROSS Magazine Release Spring
Specifications
The TANDEMKROSS Magazine Release Spring is specifically designed for the Ruger 10/22 platform. It’s constructed from high carbon spring steel, ensuring long-lasting durability and resistance to fatigue. The spring features a black finish for corrosion resistance.
The spring is designed to provide improved spring force compared to the factory spring, specifically to accommodate larger and heavier magazines like the BX-25 and Triple Kross. It’s a drop-in replacement for the factory spring, making installation quick and easy. The fact that it is made from steel is important.
These specifications are important because they directly impact the spring’s ability to reliably retain magazines, especially those with higher capacity. The high carbon spring steel construction ensures that the spring will maintain its tension over time, even with frequent use. The black finish provides added protection against rust and corrosion.
Performance & Functionality
The TANDEMKROSS Magazine Release Spring performs its job exceptionally well. It provides a noticeable increase in magazine retention force, eliminating the issue of magazines dropping unexpectedly. The spring is reliable and consistent, providing the same level of performance in all conditions.
The main strength of the TANDEMKROSS Magazine Release Spring is its enhanced magazine retention. The only potential weakness is the slightly stiffer magazine release, which may require a bit more force to actuate. However, this is a minor trade-off for the improved reliability and security.
The TANDEMKROSS Magazine Release Spring meets and exceeds my expectations. It has completely solved the problem of magazines dropping unexpectedly, providing a significant improvement to my 10/22 setup.
Design & Ergonomics
The TANDEMKROSS Magazine Release Spring is a simple, functional design. The spring is made from high-quality materials and feels robust and durable. The black finish provides a clean, professional look.
The installation process is straightforward, requiring no special tools or skills. The spring is a drop-in replacement for the factory spring, making it easy to install and remove. There is essentially no learning curve to operate it.
Durability & Maintenance
The TANDEMKROSS Magazine Release Spring is built to last. The high carbon spring steel construction ensures that it will maintain its tension over time, even with frequent use. I anticipate that this spring will outlast the factory spring by a significant margin.
The spring requires minimal maintenance. A simple cleaning and lubrication after each range session is sufficient to keep it in good working order. No repairs should be needed.
Accessories and Customization Options
The TANDEMKROSS Magazine Release Spring does not come with any accessories. However, it is compatible with all standard Ruger 10/22 magazine releases. It is also compatible with extended magazine releases, providing even easier magazine changes.
There are no real customization options for a spring.
Pros and Cons of TANDEMKROSS Magazine Release Spring
Pros
- Improved magazine retention, especially for higher-capacity magazines.
- Durable high carbon spring steel construction.
- Easy drop-in installation.
- Reliable and consistent performance.
- Cost-effective upgrade.
Cons
- Slightly stiffer magazine release.
- Simple design, not visually exciting.
Who Should Buy TANDEMKROSS Magazine Release Spring?
The TANDEMKROSS Magazine Release Spring is perfect for Ruger 10/22 owners who use higher-capacity magazines, such as the BX-25 or Triple Kross. It’s also a great upgrade for anyone who wants to improve the reliability and security of their 10/22. Competitive shooters will benefit.
Someone who primarily uses standard 10-round magazines and is satisfied with the factory spring may not need this upgrade. If you are happy with the standard release, you may not want to buy this.
A must-have modification to go along with the spring is an extended magazine release. This makes magazine changes even faster and easier, especially when using the stiffer TANDEMKROSS Magazine Release Spring.
Conclusion on TANDEMKROSS Magazine Release Spring
The TANDEMKROSS Magazine Release Spring is a simple but effective upgrade for the Ruger 10/22. It provides a significant improvement in magazine retention, especially for those using higher-capacity magazines. The spring is durable, reliable, and easy to install, making it a worthwhile investment for any 10/22 owner.
At a price of $9.99, the TANDEMKROSS Magazine Release Spring is an excellent value. The improved reliability and peace of mind are well worth the cost. You will not regret the upgrade.
I would highly recommend the TANDEMKROSS Magazine Release Spring to any Ruger 10/22 owner looking to improve the performance and reliability of their rifle. Upgrade your 10/22 today and experience the difference!