First Impressions of **ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off**
As a seasoned outdoor and tactical gear specialist, I’ve run countless rounds through various rifles. When I first heard about ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off, I was intrigued by the promise of quality brass-cased ammunition at a price point competitive with steel-cased options. Could this be the answer for high-volume shooters looking for reliability and the benefits of reloadable brass?
I needed a reliable and consistent 7.62x39mm round for both training and potential hog hunting scenarios. Steel-cased ammo is budget-friendly, but its inconsistent performance and non-reloadable nature have always been drawbacks. I was hoping ATS Ammunition could bridge the gap.
Upon receiving the ATS Ammunition, I immediately noticed the clean appearance of the rounds and the sturdy packaging. The brass casings gleamed, a stark contrast to the dull steel I’m accustomed to seeing in this caliber. The rounds felt consistently weighted, hinting at good quality control.
I had been considering Barnaul steel-cased ammo and some of the lower-priced domestic brass options from other manufacturers. However, the user reviews praising the cleanliness and consistency of ATS Ammunition, coupled with the attractive price, ultimately swayed my decision. I was hoping for ammo that would perform reliably in both my AK-47 and my AR-15 chambered in 7.62x39mm.
My initial impression was one of cautious optimism. I was excited to see if this ammo could live up to the hype and deliver consistent performance without breaking the bank. The promise of reloadable brass at a near-steel price point was definitely appealing, but the proof would be in the shooting.
Real-World Testing: Putting **ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off** to the Test
First Use Experience
I first tested the ATS Ammunition at my local outdoor shooting range on a crisp autumn day. The range offered various distances, allowing me to assess the ammo’s accuracy at 50, 100, and 200 yards. I used both my AK-47 and an AR-15 build chambered in 7.62x39mm for the initial testing.
The ATS Ammunition performed flawlessly in both rifles, even when the temperature dipped below 40 degrees Fahrenheit. There were no failures to feed, fire, or eject across several hundred rounds fired. The ammo ran cleaner than any steel cased ammunition that I have used.
Extended Use & Reliability
After several months of use, including multiple range sessions and a hog hunting trip, the ATS Ammunition has proven to be remarkably reliable. I’ve put well over 1000 rounds through my rifles with minimal signs of any issues. The brass casings show no signs of excessive wear or damage after firing.
The ATS Ammunition has held up exceptionally well. The brass casings show no signs of corrosion, even after being stored in a humid environment. Cleaning my rifles after using this ammo is significantly easier compared to when I use steel-cased ammunition.
Breaking Down the Features of **ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off**
Specifications
The ATS Ammunition X-Force is chambered in 7.62x39mm, the iconic cartridge of the AK-47 and widely used in various other rifles. This caliber offers a good balance of power and manageable recoil, making it suitable for a variety of applications.
It features a 124-grain Full Metal Jacket (FMJ) bullet, a standard bullet type for target shooting and general-purpose use. FMJ bullets are known for their reliable feeding and consistent performance, offering good penetration without excessive expansion.
The ammunition uses brass casings, a significant advantage over steel-cased alternatives. Brass is reloadable, more corrosion-resistant, and typically results in more consistent performance.
The listed muzzle velocity is 2362 ft/s, and the muzzle energy is 1544 ft-lbs. These specifications indicate that the ammo delivers adequate power for target shooting, hunting medium game, and self-defense.
It utilizes a centerfire primer, the standard for modern rifle ammunition. Centerfire primers are generally more reliable than rimfire primers, especially in adverse conditions.
These specifications matter because they directly impact the ammo’s performance, reliability, and versatility. The brass casing allows for reloading, increasing the value proposition for high-volume shooters. The FMJ bullet provides consistent performance, while the stated muzzle velocity and energy suggest adequate power for a variety of applications.
Performance & Functionality
The ATS Ammunition X-Force performs exceptionally well for its intended purpose. Accuracy is consistent, with groupings typically within 2-3 inches at 100 yards with both my AK and AR platform rifles. Reliability is outstanding, with no malfunctions experienced across a large sample of rounds.
The major strength of this ammo is its combination of reliability and affordability. It offers consistent performance comparable to more expensive brands but at a price point that rivals steel-cased options. The main weakness, if any, is that it’s not match-grade ammo, so those seeking ultimate precision may want to look elsewhere.
The ATS Ammunition X-Force meets and even exceeds expectations. The consistent performance, clean burning, and reloadable brass make it an excellent value for the price.
Design & Ergonomics
The design of the ATS Ammunition X-Force is straightforward and functional. The rounds are clean and well-manufactured, with consistent dimensions. The brass casings are smooth and free from imperfections.
The ammunition is easy to use, requiring no special handling or preparation. It loads smoothly into magazines and chambers without issue.
Durability & Maintenance
The ATS Ammunition X-Force is expected to last for years when stored properly in a cool, dry place. The brass casings are corrosion-resistant, further enhancing their longevity.
The ammunition itself requires no maintenance. Cleaning my firearms after using this ammo is significantly easier and less time-consuming compared to using steel-cased ammunition.
Accessories and Customization Options
The ATS Ammunition X-Force does not come with any specific accessories, as it’s a consumable product. However, the reloadable brass casings allow for customization in terms of bullet selection, powder charge, and primer choice for those who reload their own ammunition.
This ammo is compatible with any standard 7.62x39mm rifle. The brass casings work flawlessly with various magazine types, including steel, polymer, and aluminum magazines.
Pros and Cons of **ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off**
Pros
- Reliable performance: Consistent feeding, firing, and ejection across various rifles.
- Brass casings: Reloadable, corrosion-resistant, and cleaner burning than steel.
- Affordable price: Competitively priced with steel-cased ammunition.
- Clean burning: Reduces fouling and makes cleaning firearms easier.
- Good accuracy: Suitable for target shooting and general-purpose use.
Cons
- Not match-grade: May not be the best choice for those seeking ultimate precision.
- Limited availability: May be difficult to find in stock at all times.
Who Should Buy **ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off**?
The ATS Ammunition X-Force is perfect for high-volume shooters, recreational target shooters, and hunters looking for a reliable and affordable 7.62x39mm option. Those who reload their own ammunition will also appreciate the reloadable brass casings.
This product may not be ideal for competitive shooters seeking match-grade accuracy or those who prioritize the absolute lowest price point above all else (though the price is impressively competitive).
A must-have accessory for those who reload is a quality 7.62x39mm reloading die set. For those who don’t reload, investing in a brass casing collection system can allow them to sell the spent casings to reloaders.
Conclusion on **ATS Ammunition X-Force 7.62x39mm 124 Grain Full Metal Jacket (FMJ) Brass Cased Centerfire Rifle Ammunition
Up to 19% Off**
In summary, the ATS Ammunition X-Force 7.62x39mm 124 Grain FMJ Brass Cased Centerfire Rifle Ammunition is an excellent choice for anyone seeking reliable and affordable 7.62x39mm ammunition. The brass casings, consistent performance, and clean-burning properties make it a standout product in its category.
The price is definitely justified, especially considering the reloadable brass. It offers a significant value proposition compared to steel-cased alternatives.
I would wholeheartedly recommend the ATS Ammunition X-Force to anyone looking for a quality 7.62x39mm round. It delivers consistent performance without breaking the bank. Stock up now and experience the difference for yourself!