MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm Review

First Impressions of MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm

Work gloves. We’ve all got them, right? But finding the right work glove, especially when you’re dealing with sharp objects or rough materials, can feel like searching for a needle in a haystack. When I first saw the MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm, I was intrigued.

I’ve been working with outdoor and tactical gear for over a decade and know a thing or two about quality. The promise of cut resistance combined with a decent grip and reasonable price point ($9.99!) was enough to pique my interest.

As a long-time outdoorsman and survival instructor, I’m constantly handling knives, axes, and other potentially hazardous tools. My old gloves were wearing thin, and frankly, I’d had a few close calls that made me prioritize cut protection. I needed a glove that offered protection without sacrificing dexterity.

Compared to other gloves I considered, like the Mechanix Wear M-Pact or the Ironclad Ranchworx, the MCR Safety Cut Pro seemed to strike a better balance between protection, grip, and price. The M-Pacts are great for impact protection but overkill for finer tasks, while the Ranchworx lack the cut resistance I was after. I hoped MCR Safety’s glove would be the sweet spot.

My initial feeling was cautiously optimistic. The gloves felt lightweight and flexible, which was a good sign. I wasn’t blown away, but certainly not disappointed. Time would tell if they could hold up to the rigors of real-world use.

Check Best Price HERE

Real-World Testing: Putting MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm to the Test

First Use Experience

I first put the MCR Safety Cut Pro gloves to the test while processing firewood at my backcountry cabin. This involved using a hatchet to split logs, handling rough-hewn lumber, and clearing brush with a machete. The gloves immediately felt more comfortable than my previous leather work gloves.

The bi-polymer coating provided excellent grip, even when the wood was slightly damp. I appreciated the dexterity, as I could easily manipulate the hatchet and other tools. One minor slip with the hatchet tested the cut resistance, and I’m happy to report the gloves held up perfectly, preventing what could have been a nasty injury.

The only initial issue was some slight sweating inside the gloves, especially during more strenuous activity. This is to be expected with coated gloves, but it’s something to be aware of.

Extended Use & Reliability

After several weeks of consistent use, the MCR Safety Cut Pro gloves have proven to be surprisingly durable. I’ve used them for everything from gardening and yard work to more demanding tasks like repairing fencing and maintaining my off-road vehicle. There are some minor signs of wear on the fingertips, but the cut resistance remains intact.

I’ve washed the gloves a few times, and they seem to hold up well in the washing machine. It’s crucial to air dry them to prevent the bi-polymer coating from deteriorating. Compared to my previous gloves, which started falling apart after only a few weeks, these are a significant improvement.

These gloves have far exceeded my expectations. They provide a level of protection and dexterity that I haven’t found in other gloves at this price point.

Breaking Down the Features of MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm

Specifications

The MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm boast some key specs that contribute to their overall performance:

• 13-Gauge HyperMax Shell: This provides a balance of cut resistance and dexterity. A lower gauge would offer more cut protection but limit flexibility, while a higher gauge would be more flexible but less protective.
• Bi-Polymer Palm Coating: This coating enhances grip and abrasion resistance. It allows for a firm hold on tools and materials, even in wet or oily conditions.
• Cut-Resistant Protection: This is the main selling point, safeguarding against cuts and lacerations. It’s essential for anyone working with sharp objects.
• Reinforced Thumb Crotch: Adds durability in a high-wear area. Prevents premature failure of the glove in the thumb area, increasing longevity.
• Formerly Known as Memphis Glove: It’s worth noting the MCR Safety brand name change from Memphis Glove. This is just a brand name update.

These specifications are crucial because they directly impact the glove’s performance, comfort, and safety. The balance between cut resistance, dexterity, and durability is what makes these gloves stand out.

Performance & Functionality

The MCR Safety Cut Pro gloves perform admirably in a variety of tasks. The cut resistance provides peace of mind when handling sharp objects. The grip is excellent, and I haven’t experienced any slippage, even when working with wet or oily materials.

The main strength is the combination of cut resistance and dexterity at a reasonable price. They allow for precise movements while providing a decent level of protection. The main weakness is breathability. They can get a bit sweaty during extended use in warm weather.

They meet and even exceed expectations for a glove in this price range. The level of protection and durability is surprisingly good.

Design & Ergonomics

The gloves are lightweight and comfortable to wear for extended periods. The 13-gauge knit provides a snug fit that doesn’t feel restrictive.

There’s a slight learning curve in terms of getting used to the feel of the bi-polymer coating. However, it doesn’t take long to appreciate the added grip. The minimalist design is practical and functional.

Durability & Maintenance

Based on my experience, these gloves should last a reasonably long time, especially with proper care. The bi-polymer coating is showing some wear, but the underlying HyperMax shell remains intact.

They are easy to clean with soap and water and can be machine washed on a gentle cycle. Air drying is recommended to prevent damage to the coating.

Accessories and Customization Options

There are no specific accessories that come with the gloves, nor are there any direct customization options. However, they are compatible with most standard glove liners for added warmth in cold weather.

You could potentially add a thin layer of rubber cement to increase grip in extremely slippery conditions. However, this would likely shorten the lifespan of the gloves.

Pros and Cons of MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm

Check Best Price HERE

Who Should Buy MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm?

Perfect for: construction workers, warehouse employees, landscapers, gardeners, survivalists, hunters processing game, and anyone who frequently handles sharp objects. These are ideal for anyone needing cut protection without sacrificing dexterity.

Who should skip this product? Someone requiring heavy-duty impact protection or extreme cold-weather insulation. These gloves prioritize cut resistance and dexterity over bulkier protection.

Must-have accessories or modifications? A thin glove liner for added warmth in cold weather or for increased comfort for those prone to sweating.

Conclusion on MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm

Overall, the MCR Safety Cut Pro 13-Gauge HyperMax Cut Resistant Work Gloves w/Bi-Polymer Coated Palm are an excellent choice for anyone seeking reliable cut protection at an affordable price. They offer a great balance of dexterity, grip, and durability, making them suitable for a wide range of tasks.

At $9.99, the price is more than justified. These gloves provide a level of protection and performance that rivals more expensive options.

I would definitely recommend these gloves to anyone looking for a reliable and affordable way to protect their hands. Don’t risk a nasty cut – grab a pair of these gloves and work with confidence!