First Impressions of Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets
The Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets promise top-tier accuracy and reduced fouling, a claim I, as a seasoned long-range shooter, was eager to verify. Cutting Edge Bullets has built a reputation for innovative projectile design, and the MTAC line, with its unique SealTite band, immediately piqued my interest.
Like many precision shooters, I’ve been chasing that perfect combination of ballistic coefficient, consistent performance, and minimal barrel wear. Fouling, especially with copper projectiles, can be a real accuracy killer after extended shooting sessions. I hoped these bullets would mitigate that. Other .338 caliber bullets I’ve tested often require meticulous barrel cleaning after just a few dozen rounds to maintain consistent accuracy.
Unboxing these bullets, I was impressed by the machining quality and the uniform appearance of each projectile. The solid copper construction felt substantial, and the SealTite band was visibly distinct. They felt higher-end than typical jacketed lead-core bullets. I’ve used Berger, Hornady, and Nosler match bullets extensively, and the Cutting Edge Bullets MTAC stood out with its unique mono-metal design.
I picked the Cutting Edge Bullets primarily for their potential to reduce copper fouling and maintain accuracy at longer ranges, something other bullets I’ve used struggled with. While initial costs are higher, the potential for less time cleaning and more time shooting made it worthwhile. My first impression was one of cautious optimism; I was excited to see if the hype matched the reality.
Real-World Testing: Putting Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets to the Test
First Use Experience
My first range test with the Cutting Edge Bullets MTAC was at a local shooting range known for its 1,000-yard lanes. The weather was mild, with a slight crosswind that would test the bullets’ stability.
I immediately noticed a smoother feeding cycle in my .338 Lapua Magnum rifle, though this is specified as a single feed projectile. This was a welcome surprise compared to some bulkier, less precisely machined bullets I’ve used in the past. After zeroing my scope, I began shooting groups at 100, 300, and 500 yards.
At 100 yards, the bullets grouped incredibly tightly, almost indistinguishable from each other. However, the most impressive aspect was the consistency at 500 yards. There were no noticeable fliers, and the group size was significantly smaller than what I typically achieve with other .338 projectiles after a similar number of rounds. There was some initial pressure adjustment, but the consistency of the projectile alleviated this quickly.
Extended Use & Reliability
After several months of use, these Cutting Edge Bullets have proven to be incredibly reliable and consistent. I’ve put roughly 500 rounds downrange, and the accuracy has remained consistently high.
The touted reduction in copper fouling has been noticeable; barrel cleaning is significantly easier and less frequent. I used to clean after every 60 rounds, but with these bullets, I can easily go beyond 100 rounds without seeing a significant drop in accuracy. The wear and tear on the bullets is very minimal, with a negligible reduction in performance between initial use and the current round count.
Compared to my previous experiences with jacketed bullets, the Cutting Edge Bullets MTAC offer a superior combination of accuracy, reduced fouling, and overall consistency. These bullets have been a significant upgrade for my long-range shooting, outperforming other options I have tried.
Breaking Down the Features of Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets
Specifications
The Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets are meticulously crafted. They boast a .338 caliber, weighing in at 267 grains, and are constructed from solid copper bar stock via CNC swiss lathe machining. The diameter is precisely 0.338 inches.
- Caliber: .338 Lapua Magnum. This makes them suitable for a dedicated long-range platform.
- Weight: 267 grains. This provides a good balance between velocity and ballistic coefficient.
- Construction: Solid copper. This is for reduced fouling and consistent performance.
- G1 Ballistic Coefficient: 0.8. The BC is impressive for maintaining velocity and resisting wind drift.
- SealTite Band: Patented design. This eliminates gas blow-by.
These specifications matter significantly in the overall performance and user experience. The solid copper construction, combined with the SealTite band, reduces copper fouling and improves accuracy by ensuring a consistent seal between the bullet and the bore. The high ballistic coefficient allows for flatter trajectories and better wind resistance at long ranges.
Performance & Functionality
The Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets excel in both accuracy and reliability. The unique SealTite band creates a tight gas seal.
Accuracy is phenomenal, especially at extended ranges, with consistent groupings well under 1 MOA in my rifle. The reduced copper fouling not only makes cleaning easier, but also ensures consistent performance over longer shooting sessions.
The bullets require a bit of load development to find the optimal powder charge and seating depth, but once dialed in, they perform exceptionally well. The bullets meet and even exceed expectations in long-range performance, outperforming many other lead core projectiles.
Design & Ergonomics
The build quality is exceptional, showcasing the precision machining and attention to detail that Cutting Edge Bullets is known for. The solid copper construction gives the bullets a substantial feel.
The uniform shape and smooth finish contribute to consistent feeding and reliable performance. There is a small learning curve in developing the load, but the single feed operation mitigates many feeding issues commonly associated with bulkier rounds.
Durability & Maintenance
Given their solid copper construction, these bullets are expected to last a very long time if stored properly. The main benefit of the mono-metal design is the reduction in fouling, resulting in less frequent barrel cleaning and maintenance.
Maintenance is minimal, primarily consisting of standard barrel cleaning after each shooting session, though less frequently than with conventional bullets. The bullets themselves require no specific maintenance.
Accessories and Customization Options
These bullets, being projectiles, don’t come with accessories. However, they are designed to be used with standard reloading equipment and can be paired with various powders and primers to optimize performance.
While there are no direct customization options for the bullets themselves, reloading enthusiasts can experiment with different seating depths and powder charges to fine-tune their accuracy. The .338 Lapua Magnum platform itself has abundant accessories, from scopes to bipods, allowing for complete rifle customization to optimize these bullets.
Pros and Cons of Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle BulletsPros
- Exceptional Accuracy: Delivers consistent sub-MOA performance at long ranges.
- Reduced Copper Fouling: Significantly decreases the need for frequent barrel cleaning.
- High Ballistic Coefficient: Provides excellent trajectory and wind resistance.
- Consistent Performance: Maintains accuracy over extended shooting sessions.
- Superior Build Quality: CNC machined from solid copper for reliable performance.
Cons
- Higher Cost: More expensive than traditional lead-core bullets.
- Single Feed Requirement: Designed for single feed operation, which may not suit all rifles.
Who Should Buy Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets?
Pros
- Exceptional Accuracy: Delivers consistent sub-MOA performance at long ranges.
- Reduced Copper Fouling: Significantly decreases the need for frequent barrel cleaning.
- High Ballistic Coefficient: Provides excellent trajectory and wind resistance.
- Consistent Performance: Maintains accuracy over extended shooting sessions.
- Superior Build Quality: CNC machined from solid copper for reliable performance.
Cons
- Higher Cost: More expensive than traditional lead-core bullets.
- Single Feed Requirement: Designed for single feed operation, which may not suit all rifles.
These bullets are perfect for competitive shooters and long-range enthusiasts who demand the highest levels of accuracy and consistency. The reduced copper fouling is a significant advantage for shooters who engage in frequent extended shooting sessions.
This product is ideally suited for shooters prioritizing single-shot precision in competitions or extreme long-range hunting situations. Anyone relying on rapid follow-up shots should seek alternatives.
A must-have accessory would be high-quality reloading equipment to precisely control powder charges and seating depths, maximizing the bullet’s potential. Reloading expertise and appropriate tools are crucial for getting the most out of these bullets.
Conclusion on Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets
The Cutting Edge Bullets Single Feed MTAC .338 Caliber 267 Grain Solid Copper Match Rifle Bullets are a top-tier choice for shooters who demand exceptional long-range accuracy and reduced copper fouling. While they come at a higher price point than traditional bullets, the benefits in performance and ease of maintenance make them a worthwhile investment.
The solid copper construction and innovative SealTite band contribute to consistent performance and reduced cleaning time, allowing for more time spent shooting. The price is justified by the superior accuracy and consistent performance that these bullets offer.
I would highly recommend these bullets to any serious long-range shooter looking to elevate their performance. If you’re ready to invest in top-quality components and dedicate the time to load development, the Cutting Edge Bullets MTAC will undoubtedly impress. Upgrade your precision shooting today and experience the difference.
