Andro Corp Industries RRD GEN2 Single Port Muzzle Brake Review

Table of Contents

First Impressions of Andro Corp Industries RRD GEN2 Single Port Muzzle Brake

Muzzle brakes. They’re not always the prettiest additions to a firearm, but they sure can make a difference in recoil management and follow-up shot accuracy. The Andro Corp Industries RRD GEN2 Single Port Muzzle Brake promises to deliver recoil reduction in a compact, single-port design, and I was eager to see if it lived up to the hype. As someone with over a decade in the tactical gear realm, I’ve seen countless muzzle devices come and go, and I approach each new product with a healthy dose of skepticism and practical expectation.

I was looking for a muzzle brake that could tame the recoil of my 9mm AR pistol without adding excessive length or weight. Many brakes on the market are overly aggressive in their design, which can lead to increased muzzle blast and concussion, something I wanted to avoid. The Andro Corp Industries offering caught my eye because of its single-port design, which suggested a good balance between recoil reduction and minimal side effects.

Upon unboxing, the Andro Corp Industries RRD GEN2 Single Port Muzzle Brake felt solid and well-made. The nitride finish was smooth and even, and the machining looked precise. Compared to some of the cheaper brakes I’ve encountered, this one felt like a quality piece. I’ve previously used a Strike Industries J-Comp and a Kaw Valley Precision Linear Comp. While the J-Comp offered decent recoil reduction, it was a bit too concussive, and the KVP Linear Comp, while great for redirecting sound, didn’t offer much recoil mitigation. The RRD GEN2 seemed like a potential sweet spot between the two.

My initial impression was positive. I was excited to get it installed and see how it performed at the range, hoping it would provide noticeable recoil reduction without making the shooting experience unpleasant.

Check Best Price HERE

See on PSA

Real-World Testing: Putting Andro Corp Industries RRD GEN2 Single Port Muzzle Brake to the Test

First Use Experience

I tested the Andro Corp Industries RRD GEN2 Single Port Muzzle Brake on my 9mm AR pistol at an outdoor range. The weather was clear and dry, around 70 degrees Fahrenheit – ideal conditions for shooting. Installation was straightforward; the brake threaded on easily and tightened securely with a crush washer.

The immediate difference was noticeable. The recoil felt significantly reduced compared to shooting with just a thread protector. Muzzle climb was also minimized, allowing for quicker follow-up shots. There was a slight increase in muzzle blast, but it was manageable and not as harsh as some other brakes I’ve used.

Extended Use & Reliability

After several range trips spanning a few months, the Andro Corp Industries RRD GEN2 Single Port Muzzle Brake has held up remarkably well. There are no signs of loosening or damage, and the nitride finish still looks new. I’ve put several hundred rounds through it without any issues.

Cleaning is simple; a quick wipe down with a solvent-soaked cloth is all it takes to remove carbon buildup. So far, it has outperformed my expectations for a brake in this price range. Compared to my previous experience with the Strike Industries J-Comp, the RRD GEN2 offers similar recoil reduction with less concussion, making it a more pleasant shooting experience overall.

Breaking Down the Features of Andro Corp Industries RRD GEN2 Single Port Muzzle Brake

Specifications

Caliber: 9mm Luger. This makes it specifically designed for 9mm firearms, ensuring optimal performance.
Threads per Inch: 1/2×28. This is a common thread pitch for 9mm AR-15 barrels, making it compatible with a wide range of platforms.
Material: 17-4PH Stainless Steel. This is a high-strength, corrosion-resistant stainless steel alloy, ensuring durability and longevity.
Finish: Nitride. The nitride finish provides a hard, wear-resistant surface, further enhancing durability and corrosion resistance.
Color: Black. This gives it a sleek, tactical appearance.
Country of Origin: USA. This indicates domestic manufacturing, which often implies higher quality control standards.

These specifications are important because they directly impact the brake’s performance, durability, and compatibility. The 17-4PH stainless steel construction and nitride finish mean it can withstand harsh conditions and repeated use.

Performance & Functionality

The Andro Corp Industries RRD GEN2 Single Port Muzzle Brake excels at reducing recoil and muzzle climb. It allows for faster follow-up shots and improved accuracy, especially during rapid firing.

The single-port design effectively redirects gasses to counteract recoil. A slight increase in muzzle blast is the trade-off, but it’s a worthwhile compromise for the enhanced control.

Design & Ergonomics

The RRD GEN2 has a compact and streamlined design. It adds minimal length to the barrel and doesn’t feel overly bulky. The weight is well-balanced, and it doesn’t significantly affect the overall handling of the firearm.

The installation is simple and straightforward. It requires no specialized tools beyond a wrench and a crush washer or shims for proper timing.

Durability & Maintenance

The 17-4PH stainless steel construction and nitride finish ensure excellent durability. This muzzle brake is built to withstand the rigors of frequent shooting and harsh environments.

Maintenance is minimal. Regular cleaning with a solvent and brush is sufficient to keep it in top condition.

Accessories and Customization Options

The Andro Corp Industries RRD GEN2 Single Port Muzzle Brake doesn’t come with any specific accessories beyond the necessary crush washer. However, its standard 1/2×28 thread pitch makes it compatible with a wide range of AR-15 accessories, such as suppressors and blast shields, provided they also use the same thread pitch.

Pros and Cons of Andro Corp Industries RRD GEN2 Single Port Muzzle Brake

Pros

Significant Recoil Reduction: Noticeably reduces recoil, making for a more comfortable and controllable shooting experience.
Improved Muzzle Control: Minimizes muzzle climb, allowing for faster and more accurate follow-up shots.
Durable Construction: Made from high-quality 17-4PH stainless steel with a nitride finish for excellent durability and corrosion resistance.
Compact Design: Adds minimal length and weight to the firearm, preserving its maneuverability.
Easy Installation: Simple and straightforward installation process.

Cons

Slightly Increased Muzzle Blast: A common trade-off with muzzle brakes, though manageable.
Timing Required: Proper timing with a crush washer or shims is necessary for optimal performance.

Who Should Buy Andro Corp Industries RRD GEN2 Single Port Muzzle Brake?

The Andro Corp Industries RRD GEN2 Single Port Muzzle Brake is perfect for 9mm AR pistol owners, competitive shooters, and anyone looking to improve recoil management and follow-up shot accuracy. It’s also a great upgrade for those who find their 9mm platforms a little snappy and want a more comfortable shooting experience.

Those who prioritize absolute minimal muzzle blast above all else might want to skip this product in favor of a linear compensator. Also, if you are shooting larger calibers, this 9mm specific brake will not function correctly, and may be unsafe.

A must-have accessory would be a set of shims for precise timing if you prefer that over a crush washer. A quality thread protector is also a good idea to protect the threads when the brake is not in use.

Conclusion on Andro Corp Industries RRD GEN2 Single Port Muzzle Brake

The Andro Corp Industries RRD GEN2 Single Port Muzzle Brake is a well-made, effective muzzle device that delivers on its promises. Its durable construction, compact design, and noticeable recoil reduction make it a worthwhile upgrade for any 9mm AR pistol.

The price of $73.94 is justified by the quality of materials and the performance gains. It’s a solid value proposition for those seeking enhanced control and accuracy.

I would absolutely recommend the Andro Corp Industries RRD GEN2 Single Port Muzzle Brake to anyone looking to improve the shooting experience of their 9mm AR pistol. It’s a practical and effective upgrade that makes a noticeable difference. If you’re tired of excessive recoil and muzzle climb, give this brake a try – you won’t be disappointed.