First Impressions of Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun
The Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun promises to streamline your red dot setup on one of the most iconic tactical shotguns available. This mount, designed specifically for Benelli shotguns, offers a low-profile and robust platform for Aimpoint Micro red dots and compatible optics. The promise of co-witnessing with factory sights while maintaining a sleek profile immediately piqued my interest, having dealt with bulky and less-than-ideal mounting solutions in the past.
I’ve always been a proponent of the KISS (Keep It Simple, Stupid) principle, especially when it comes to tactical gear. Picatinny rails on shotguns often result in a red dot sitting too high, requiring awkward cheek welds. The Scalarworks SYNC looked like it could solve this issue by offering a direct, low-profile mount.
Unboxing the Scalarworks SYNC revealed a cleanly machined piece of aluminum. The nitrided finish looked durable and ready to withstand the rigors of shotgun recoil. It felt solid in hand, instilling confidence in its ability to hold zero.
I considered other options like side-mounted rails or even larger optic-specific mounts. Ultimately, I chose the Scalarworks SYNC because of its minimalist design and reputation for quality. My initial impression was one of cautious optimism; I was eager to see if it would live up to the hype.
Real-World Testing: Putting Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun to the Test
First Use Experience
My first range trip with the Scalarworks SYNC mounted on my Benelli M4 was an eye-opener. I tested it at an outdoor range, engaging targets from 7 to 50 yards using a mix of buckshot and slugs. The mount held the Aimpoint Micro T-2 securely, maintaining zero throughout several magazines.
The weather was mild, but I intentionally subjected the shotgun to some rough handling – rapid firing and simulated tactical reloads. The Scalarworks SYNC showed no signs of loosening or shifting. The low-profile design made for a natural cheek weld, significantly improving my speed and accuracy compared to my previous setup.
Installation was straightforward, although I encountered the same “shoulder screw” issue mentioned in some online reviews. This required some fiddling, but once properly adjusted, the mount felt rock solid.
Extended Use & Reliability
After several months of regular use, the Scalarworks SYNC continues to impress. I’ve put hundreds of rounds through my Benelli M4 with this mount installed. There are no signs of wear or loosening.
The finish has proven to be extremely durable, resisting scratches and dings despite being bumped around in various range bags and tactical scenarios. Cleaning is simple; a quick wipe down with a lightly oiled cloth keeps it looking new.
Compared to previous rail-mounted setups, the Scalarworks SYNC offers a vastly superior shooting experience. The lower optic height makes for faster target acquisition and more comfortable shooting over extended periods. It has definitely exceeded my initial expectations.
Breaking Down the Features of Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun
Specifications
The Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun is engineered for a specific purpose: to securely mount Aimpoint Micro red dot sights (and compatible optics) directly to Benelli shotguns. It’s constructed from 7075-T6 Aluminum and 4140H Steel, ensuring strength and durability. The mount features a black nitrided finish for corrosion resistance.
The Manufacturer is Scalarworks, a company known for its precision-engineered firearm accessories. It’s specifically designed to fit Benelli M2 Tactical, M3, M4, M1014, Vinci Tactical, Super Vinci, and Super Black Eagle II & III shotguns, as well as Stoeger M3000 shotguns. Its low-profile design facilitates a lower 1/3 co-witness with standard Benelli ghost ring sights.
These specifications are crucial because they ensure a rock-solid mounting platform. The aluminum and steel construction provide the necessary rigidity to withstand the heavy recoil of a 12-gauge shotgun.
Performance & Functionality
The Scalarworks SYNC performs its primary function flawlessly: securely holding an optic. The mount’s rigid design ensures that the red dot maintains zero, even under heavy recoil. The low-profile design significantly enhances usability, allowing for a more natural shooting posture and faster target acquisition.
One minor weakness is the initial installation. Fine-tuning the “shoulder screws” can be a bit tricky. However, once properly installed, the mount is exceptionally solid. It definitely meets and exceeds my expectations for a dedicated shotgun optic mount.
Design & Ergonomics
The build quality of the Scalarworks SYNC is excellent. The machining is precise, and the finish is flawless. The mount’s lightweight design doesn’t add noticeable bulk to the shotgun.
The low-profile design contributes significantly to the shotgun’s ergonomics. The natural cheek weld makes for comfortable and efficient shooting. There’s no significant learning curve; it’s intuitive and easy to use.
Durability & Maintenance
Based on my experience, the Scalarworks SYNC is built to last. The robust materials and durable finish ensure it can withstand years of use and abuse. Maintenance is minimal; a simple cleaning and occasional check of the mounting screws is all that’s required.
Accessories and Customization Options
The Scalarworks SYNC is primarily designed for Aimpoint Micro T-2, H-2, T-1, H-1, and CompM5 red dot sights. It’s also compatible with Holosun HE403, HE503, HE515, HE530, HS403, and HS503 series optics. Primary Arms Advanced Micro Dot and Microdot sights are also compatible, along with Sig Sauer ROMEO4 (H/S/T) and ROMEO5 optics. Finally, it’s compatible with Vortex Crossfire and Sparc II red dot sights.
While it doesn’t offer extensive customization options, its compatibility with a wide range of micro red dots is a significant advantage. Its design allows for the retention of factory ghost ring sights.
Pros and Cons of Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun
Pros
- Provides an incredibly low-profile mount for micro red dots on Benelli shotguns. This dramatically improves cheek weld and target acquisition speed.
- Constructed from durable 7075-T6 Aluminum and 4140H Steel, ensuring long-lasting reliability. It can withstand the heavy recoil of a 12-gauge shotgun.
- Facilitates a lower 1/3 co-witness with factory ghost ring sights. This allows for backup sighting options.
- Compatible with a wide range of Aimpoint Micro and similar footprint red dot sights. This gives users plenty of optic choices.
- Easy to install, with all necessary tools included (although shoulder screw adjustment might be needed).
Cons
- The “shoulder screw” adjustment during installation can be finicky and time-consuming. This requires careful attention to avoid over-tightening.
- The price point is higher than some basic rail-mounted options. This may deter budget-conscious buyers.
Who Should Buy Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun?
This mount is perfect for tactical shooters, home defense enthusiasts, and law enforcement professionals who rely on a Benelli shotgun. It’s ideal for anyone seeking a low-profile, co-witnessed red dot setup for faster target acquisition and improved accuracy.
Those on a very tight budget or who don’t mind a higher-profile optic setup might want to skip this product. Someone unfamiliar with firearms or uncomfortable with minor adjustments during installation might find it slightly challenging.
A must-have accessory would be a quality thread locker to ensure the shoulder screws stay in place. Regular inspection of the screws after prolonged use is also recommended.
Conclusion on Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun
The Scalarworks SYNC Aimpoint Micro T-2 Standalione Mount f/Benelli Shotgun is a premium accessory that delivers on its promises. It provides a rock-solid, low-profile mounting solution for micro red dots on Benelli shotguns. The improved ergonomics and faster target acquisition make it a worthwhile upgrade for anyone serious about their shotgun’s performance.
While the price is higher than some alternatives, the quality and performance justify the cost. I would definitely recommend this mount to anyone looking to enhance their Benelli shotgun with a red dot optic. Upgrade your Benelli today with the Scalarworks SYNC and experience the difference!