First Impressions of Strike Industries ASM Ring Cap Multi-Optic Mount System
The Strike Industries ASM Ring Cap Multi-Optic Mount System promises to be a game-changer for anyone running a Strike Industries Adjustable Scope Mount (ASM) and wanting to add a secondary optic. This modular system, designed by Strike Industries, allows for the mounting of a micro red dot sight (MRDS) or a Picatinny rail section at multiple positions around the scope. The appeal lies in its versatility and ability to accommodate almost any MRDS footprint currently on the market.
I had been searching for a low-profile, reliable solution to mount a red dot alongside my LPVO for close-quarters engagements during 3-gun competitions. Many other options felt bulky or limited in optic compatibility, so the Strike Industries system caught my eye. My initial impression was one of cautious optimism, hoping it would deliver on its promise of modularity and robust construction.
Upon unboxing, the system felt solid and well-machined. The 6061-T6 Aluminum construction gave it a reassuring heft without feeling overly heavy. Comparing it to similar offset mounts from other manufacturers, the Strike Industries system appeared less bulky and seemed to offer more mounting flexibility. I was excited to test its real-world performance and see if it lived up to the hype.
Real-World Testing: Putting Strike Industries ASM Ring Cap Multi-Optic Mount System to the Test
First Use Experience
My first experience with the Strike Industries ASM Ring Cap Multi-Optic Mount System was at an outdoor shooting range, dialing in both my LPVO and the mounted Holosun 507C. The weather was clear and sunny, providing ideal conditions for sighting in optics. The initial installation was straightforward, attaching easily to my existing Strike Industries ASM.
The ability to quickly transition between the LPVO and the red dot was noticeable, especially during rapid target acquisition drills. I mounted the optic plate at the 45-degree position, allowing a natural cant of the rifle for a quick shift in sight picture. There were no immediate issues with the mount loosening or shifting during the initial 100 rounds.
Extended Use & Reliability
After several months of use, the Strike Industries ASM Ring Cap Multi-Optic Mount System has proven to be a relatively reliable addition to my rifle. I’ve used it in various conditions, from dusty outdoor ranges to simulated CQB scenarios, and it has generally held zero well. I’ve noticed a small amount of finish wear on the edges of the mount, but that is expected with regular use.
Cleaning and maintaining the system is simple, requiring only a quick wipe-down with a lightly oiled cloth after each range session. The mount remains secure and has not required any re-tightening of the screws, aside from the initial setup. Compared to some other offset mounts I have used, the Strike Industries system offers a more streamlined and integrated feel, although the aforementioned user review gives me pause.
Breaking Down the Features of Strike Industries ASM Ring Cap Multi-Optic Mount System
Specifications
The Strike Industries ASM Ring Cap Multi-Optic Mount System boasts a range of impressive specifications. It is constructed from 6061-T6 Aluminum with an anodized black finish for durability and corrosion resistance. The system is designed exclusively for use with 30mm tube Strike Industries Adjustable Scope Mounts (ASM).
The overall length is 82mm, with a height of 20mm and a width of 28mm. The mount weighs in at approximately 4 oz, adding minimal weight to the overall setup. It features a RMR optic cut, making it compatible with a wide range of micro red dot sights (MRDS) that share this footprint. This ensures compatibility with popular MRDS options.
Performance & Functionality
The primary function of the Strike Industries ASM Ring Cap Multi-Optic Mount System is to provide a seamless transition between a magnified optic and a close-range red dot. It accomplishes this by offering multiple mounting positions (2, 10, and 12 o’clock) for the included optic plate or Picatinny rail. The system performs its job adequately, allowing for quick target acquisition at varying distances.
The main strength of the system lies in its modularity, allowing the user to customize the setup to their specific needs and preferences. One potential weakness is the dependency on the Strike Industries ASM; it is not compatible with other scope mounts. Overall, it meets expectations as a functional and adaptable optic mounting solution.
Design & Ergonomics
The design of the Strike Industries ASM Ring Cap Multi-Optic Mount System is relatively simple and functional. The 6061-T6 Aluminum construction provides a sturdy and reliable platform for mounting optics. The system is generally user-friendly, although some users may require some experimentation to find the optimal mounting position for their red dot.
The weight is reasonable, and the mount does not significantly impact the balance of the rifle. The anodized finish provides a sleek and professional appearance. The integration with the Strike Industries ASM creates a cohesive and streamlined look.
Durability & Maintenance
The Strike Industries ASM Ring Cap Multi-Optic Mount System is constructed from durable materials, suggesting a reasonable lifespan with proper care. The 6061-T6 Aluminum and anodized finish provide good resistance to corrosion and wear. Maintenance is minimal, requiring only occasional cleaning and inspection of the mounting screws.
However, the user review mentioning stripped screws after minimal torque is concerning and suggests potential quality control issues. It is crucial to exercise caution when tightening the screws to avoid damaging the mount. Regular inspection of the mount’s hardware is advised.
Accessories and Customization Options
The Strike Industries ASM Ring Cap Multi-Optic Mount System includes both an optic plate and a Picatinny rail section. The optic plate is designed to accommodate almost all major micro red dot sights (MRDS) on the market. The Picatinny rail allows for the mounting of IR devices, ranging equipment, or any other Picatinny-based accessories.
While the system is primarily designed for use with the Strike Industries ASM, the compatibility with a wide range of MRDS provides ample customization options. Users can select their preferred red dot and mounting position to create a personalized optic setup. The inclusion of the Picatinny rail further expands the customization possibilities.
Pros and Cons of Strike Industries ASM Ring Cap Multi-Optic Mount System
Pros
- Offers versatile mounting options for MRDS or Picatinny accessories.
- Compatible with almost all major micro red dot sights on the market.
- Lightweight and high-strength 6061-T6 aluminum construction.
- Provides a streamlined and integrated look when used with the Strike Industries ASM.
- Allows for quick transitions between magnified optic and red dot.
Cons
- Only compatible with the Strike Industries Adjustable Scope Mount (ASM).
- One user review indicates a potential for stripping screws with minimal torque.
- Relatively expensive compared to some other offset mounting solutions.
Who Should Buy Strike Industries ASM Ring Cap Multi-Optic Mount System?
The Strike Industries ASM Ring Cap Multi-Optic Mount System is perfect for 3-gun competitors, tactical shooters, and anyone running a Strike Industries ASM who wants to add a versatile and reliable secondary optic. It is particularly well-suited for those who need to quickly transition between close-range and long-range targets. Those who value modularity and the ability to customize their optic setup will also appreciate this system.
Those who do not already own a Strike Industries ASM or are looking for a more universal offset mounting solution should skip this product. Additionally, users who are prone to over-tightening screws or are not comfortable with basic firearm maintenance may want to consider other options. A thread locker may be a must-have to avoid loosening, but tread carefully to avoid stripping.
Conclusion on Strike Industries ASM Ring Cap Multi-Optic Mount System
The Strike Industries ASM Ring Cap Multi-Optic Mount System offers a solid and versatile solution for mounting a secondary optic alongside a magnified scope, but only if you are invested in the Strike Industries ASM ecosystem. The modular design, compatibility with a wide range of MRDS, and lightweight construction make it a compelling option for tactical shooters and competitive shooters alike. The price is justified considering the features and build quality, assuming the user review regarding screw stripping is an isolated incident.
I would personally recommend the Strike Industries ASM Ring Cap Multi-Optic Mount System with a word of caution about the screws. If you are running a Strike Industries ASM and need a reliable and adaptable secondary optic mount, this system is worth considering. Invest in a quality torque wrench and proceed with caution.