First Impressions of Kensight No Sight Notch Cut Flat Base Silhouette Sight
The Kensight No Sight Notch Cut Flat Base Silhouette Sight promises a unique solution for Remington XP-100 owners seeking to ditch bulky scopes for a lighter, adjustable rear sight. Kensight, known for its robust sights, aims to provide a reliable and accurate alternative for silhouette shooting and beyond. I was intrigued to get my hands on this unconventional offering, hoping it would breathe new life into my aging XP-100.
My long-range pistol shooting had plateaued. The factory setup on my XP-100 always felt clunky, and I was chasing a more streamlined, intuitive aiming system. This Kensight sight piqued my interest as a potential game-changer for silhouette competitions.
Upon receiving the sight, the first thing I noticed was its solid construction. The thick, flat base exuded durability, and the Bo-Mar/LPA-style windage and elevation adjustments appeared precise. My initial impression was one of robust functionality, though the lack of a pre-tapped mounting solution presented a slight hurdle. The weight felt appropriate; substantial enough to inspire confidence but not overly heavy as to unbalance the pistol.
I considered other aftermarket sight options, but many felt too flimsy or lacked the refined adjustments I desired. This Kensight product promised a blend of ruggedness and precision that seemed ideal. I was cautiously optimistic that this could be the sighting solution I’d been searching for.
Real-World Testing: Putting Kensight No Sight Notch Cut Flat Base Silhouette Sight to the Test
First Use Experience
My first experience with the Kensight No Sight Notch Cut Flat Base Silhouette Sight was at my local outdoor range, nestled in the foothills. After carefully drilling and tapping the necessary 6-48 hole (a task I found straightforward with the right tools), I securely mounted the sight to my Remington XP-100. The conditions were sunny with a slight crosswind, perfect for testing the sight’s adjustability.
Initially, I needed some time to adjust to the open sight picture after years of relying on a scope. The sight notch provided a clear aiming point, and the Bo-Mar/LPA adjustments proved precise and responsive. After a few adjustments, I was consistently hitting steel targets at 100 yards. The crosswind did require some fine-tuning, highlighting the importance of the windage adjustments.
The first use revealed a significant improvement in the pistol’s balance and handling. The absence of a scope made the XP-100 feel lighter and more maneuverable. I did notice the need for a slightly higher front sight to align with the Kensight, a modification I would later address.
Extended Use & Reliability
After several months of consistent use, the Kensight No Sight Notch Cut Flat Base Silhouette Sight has proven remarkably durable. Despite regular exposure to the elements, including rain and dust, the sight shows no signs of wear or corrosion. The elevation and windage adjustments remain crisp and reliable, holding their settings even after hundreds of rounds.
Maintaining the sight is simple. A quick wipe-down with a lightly oiled cloth after each range session keeps it clean and functional. The robust construction and quality materials suggest it will withstand years of use. Compared to my previous scope setup, this sight offers a more intuitive and enjoyable shooting experience.
The enhanced balance and streamlined aiming system has notably improved my silhouette scores. The Kensight has exceeded my initial expectations, proving to be a worthwhile upgrade for my XP-100. It’s transformed the pistol from a clunky range toy into a precision instrument.
Breaking Down the Features of Kensight No Sight Notch Cut Flat Base Silhouette Sight
Specifications
- The Kensight No Sight Notch Cut Flat Base Silhouette Sight is designed specifically for the Remington Model XP-100 pistol. It replaces the factory scope mount with an adjustable rear sight.
- The sight body is constructed from durable 4140 Chrome Moly Steel with a black finish. This material ensures excellent strength and resistance to wear and corrosion.
- The sight features Bo-Mar/LPA-style elevation and windage adjustments. These provide precise and repeatable control over point of impact.
- The pivot pin is beefed up to 4mm in diameter and hardened. This improvement prevents wear and breakage, ensuring long-term reliability.
- The Kensight requires a 6-48 tapped hole for installation (hardware included). This is a standard gunsmithing size, making the installation relatively straightforward.
Performance & Functionality
The Kensight No Sight Notch Cut Flat Base Silhouette Sight performs exceptionally well in its intended role. The precise adjustments and clear sight picture allow for consistent accuracy at various distances.
Its primary strength lies in its adjustability and ruggedness. The steel construction can withstand considerable abuse. The only potential weakness is the need for professional installation if you lack the necessary tools and skills.
The sight exceeded my expectations by offering a noticeable improvement in the handling and balance of my XP-100.
Design & Ergonomics
The Kensight No Sight Notch Cut Flat Base Silhouette Sight features a functional, no-frills design. The thick, flat base provides a stable platform for the sight, and the black finish blends well with the XP-100’s aesthetics.
The sight is easy to use once installed, although some may require time to adjust to the open sight picture. The windage and elevation knobs are easily accessible and provide tactile feedback.
The weight of the sight feels balanced and doesn’t add excessive bulk to the pistol.
Durability & Maintenance
Given the Kensight No Sight Notch Cut Flat Base Silhouette Sight’s steel construction, it should last for many years with proper care. The hardened pivot pin is a key element that enhances its longevity.
Maintenance is minimal, requiring only occasional cleaning and lubrication. The sight appears resistant to corrosion and wear.
The robust design suggests minimal need for repair unless subjected to extreme abuse.
Accessories and Customization Options
The Kensight No Sight Notch Cut Flat Base Silhouette Sight does not come with additional accessories beyond the necessary mounting hardware. A taller front sight may be required for optimal alignment depending on your existing setup.
There are no direct customization options for the sight itself, but it does allow for a more streamlined pistol overall. It is compatible with any modifications that enhance the Remington XP-100 platform.
Third-party front sight options are readily available to accommodate the change in sight height.
Pros and Cons of Kensight No Sight Notch Cut Flat Base Silhouette Sight
Pros
- Durable 4140 Chrome Moly Steel construction ensures long-lasting reliability.
- Precise Bo-Mar/LPA-style windage and elevation adjustments for accurate shooting.
- Beefed-up pivot pin for enhanced resistance to wear and breakage.
- Provides a lighter, more balanced feel compared to using a scope on the XP-100.
- Significantly improves the pistol’s handling and maneuverability.
Cons
- Requires drilling and tapping a 6-48 hole for installation, which may necessitate professional gunsmithing.
- May require a taller front sight for proper alignment.
- The sight notch may not be ideal for all shooters’ preferences.
Who Should Buy Kensight No Sight Notch Cut Flat Base Silhouette Sight?
The Kensight No Sight Notch Cut Flat Base Silhouette Sight is perfect for:
- Remington XP-100 owners seeking a lighter, more streamlined alternative to a scope.
- Silhouette shooters looking for a precise and adjustable rear sight.
- Hobbyists and gun enthusiasts who enjoy customizing and improving their firearms.
- Individuals who prioritize durability and reliability in their shooting accessories.
This product is not ideal for:
- Individuals uncomfortable with basic gunsmithing tasks, such as drilling and tapping.
- Shooters who prefer the magnification and clarity of a scope.
- Those seeking a simple drop-in solution without any modification required.
A must-have accessory is a quality 6-48 tap and drill set, along with a taller front sight if needed.
Conclusion on Kensight No Sight Notch Cut Flat Base Silhouette Sight
The Kensight No Sight Notch Cut Flat Base Silhouette Sight offers a significant improvement over the factory scope setup on the Remington XP-100. Its durable construction, precise adjustments, and streamlined design make it a worthwhile upgrade for silhouette shooters and anyone seeking a more balanced and maneuverable pistol.
The price of $118.06 is justified given the quality of materials and construction. The enhanced shooting experience it provides makes it a worthwhile investment for serious XP-100 enthusiasts.
I would personally recommend the Kensight No Sight Notch Cut Flat Base Silhouette Sight to anyone looking to revitalize their Remington XP-100. Ditch the scope, embrace the open sight picture, and experience the joy of precision pistol shooting! It will transform your shooting!