First Impressions of Kensight Glock Adjustable Rear Sight Elevation Screw
The Kensight Glock Adjustable Rear Sight Elevation Screw is a tiny, unassuming part, but it plays a crucial role in fine-tuning the accuracy of your Glock pistol. Manufactured by Kensight, a company known for precision and durability, this replacement screw promises to restore or enhance the adjustability of your rear sight. Having tinkered with Glocks for years, I’ve often found myself frustrated by sights that were just a hair off, and elevation adjustments were the key to resolve them. This little screw offered the potential for that perfect point of impact.
What prompted me to seek out this seemingly insignificant component? My old Glock 19’s rear sight elevation screw had become stripped after countless range sessions and adjustments. I was facing a frustrating situation where my shots were consistently landing a few inches low at 15 yards. The Kensight Glock Adjustable Rear Sight Elevation Screw seemed like a cost-effective solution compared to replacing the entire rear sight.
Upon receiving the Kensight Glock Adjustable Rear Sight Elevation Screw, I was immediately impressed by its solid construction and clean machining. The black finish was even and appeared durable. The screw was small, but weighty enough to feel substantial. Comparing it to the remnants of my old, stripped screw, the Kensight part was clearly superior. I’ve used similar screws from other manufacturers in the past, often finding them made from softer metals that easily deformed. This Kensight screw felt much more robust than the cheaper alternatives.
My initial feeling was one of cautious optimism. It’s just a screw, but it represents the difference between frustrating inaccuracy and confident precision. If this small part lives up to its promise, it could save me a lot of time and money.
Real-World Testing: Putting Kensight Glock Adjustable Rear Sight Elevation Screw to the Test
First Use Experience
I tested the Kensight Glock Adjustable Rear Sight Elevation Screw at my local outdoor shooting range. The range offered varying distances up to 50 yards. I installed the new screw in my Glock 19’s adjustable rear sight, a straightforward process that took only a few minutes using a small screwdriver.
During my range session, the weather was sunny and dry. I focused on testing the screw’s ability to accurately adjust the elevation of my shots at 15 and 25 yards. Adjusting the screw felt smooth and precise, with noticeable clicks indicating each increment of adjustment. After a few tweaks, I was able to bring my shots right on target at 15 yards, eliminating the low impact issue I had been experiencing. There were no issues or unexpected occurrences during this first test.
Extended Use & Reliability
After several weeks of use and approximately 500 rounds fired, the Kensight Glock Adjustable Rear Sight Elevation Screw continues to perform flawlessly. There are no signs of wear and tear on the screw head or threads. The screw remains firmly in place. It has not loosened or required re-adjustment after initial zeroing.
Cleaning and maintaining the screw is simple. I generally just wipe it down with a lightly oiled cloth along with the rest of the pistol after each range session. Compared to my previous experiences with softer, more easily damaged elevation screws, the Kensight screw has far exceeded my expectations. The material used is clearly more durable.
Breaking Down the Features of Kensight Glock Adjustable Rear Sight Elevation Screw
Specifications
The Kensight Glock Adjustable Rear Sight Elevation Screw boasts the following specifications:
- Material: 4140 Chrome Moly Steel. This ensures high strength and resistance to wear.
- Length: .238 inches in total. This precise length is designed for optimal fit within Kensight adjustable rear sights.
- Head Dimensions: .078 inches tall x .325 inches in diameter. This size provides ample surface area for easy adjustment.
- Thread Dimensions: .160 inches long x .131 inches in diameter. These threads are finely cut for smooth and accurate adjustments.
- Color: Black. The black finish blends seamlessly with most Glock rear sights.
- Compatibility: Primarily designed for Kensight Glock adjustable rear sights. The manufacturer explicitly states that they cannot guarantee compatibility with sights from other manufacturers.
- Gun Make: Glock. It’s specifically engineered for Glock pistols.
- Gun Model: Universal. Designed to fit a variety of Glock models.
- Gun Type: Pistol. This component is intended for pistol sights.
- Mount Type: Dovetail. This screw works with dovetail-mounted rear sights.
These specifications are critical because they directly impact the screw’s functionality and durability. The 4140 Chrome Moly Steel construction ensures that the screw can withstand repeated adjustments without stripping or deforming. The precise thread dimensions are essential for smooth, accurate elevation adjustments.
Performance & Functionality
The Kensight Glock Adjustable Rear Sight Elevation Screw excels at its primary function: allowing for precise elevation adjustments to the rear sight. The screw provides a noticeable and tactile click with each adjustment increment. This makes it easy to fine-tune your point of impact.
The main strength of this product is its ability to restore or improve the adjustability of Kensight adjustable rear sights. The only potential weakness is its limited compatibility with sights from other manufacturers. It meets my expectations perfectly.
Design & Ergonomics
The design is simple but effective. The screw head is large enough to grip easily, even with gloved hands. The 4140 Chrome Moly Steel construction provides excellent durability and a solid feel.
There’s virtually no learning curve. If you’re familiar with adjusting rear sights, installing and using this screw is intuitive.
Durability & Maintenance
Given the 4140 Chrome Moly Steel construction, this screw should last for years with proper care. Maintenance is minimal. Simply wiping it down with a lightly oiled cloth occasionally is sufficient to prevent corrosion.
Accessories and Customization Options
The Kensight Glock Adjustable Rear Sight Elevation Screw doesn’t require any additional accessories for its intended function. However, it works in conjunction with other sight-related accessories. You’ll need a small screwdriver or sight adjustment tool for installation and adjustment.
While the screw itself isn’t customizable, it allows you to customize your point of impact, enhancing the overall accuracy and usability of your Glock. It’s designed specifically for use with Kensight adjustable rear sights, so compatibility with other brands’ accessories may be limited.
Pros and Cons of Kensight Glock Adjustable Rear Sight Elevation Screw
Pros
- Precise Elevation Adjustment: Allows for fine-tuning of your pistol’s point of impact.
- Durable Construction: Made from 4140 Chrome Moly Steel for long-lasting performance.
- Easy Installation: Simple to install with basic tools.
- Cost-Effective Solution: A much cheaper alternative to replacing the entire rear sight.
- Restores Sight Functionality: Perfect for replacing damaged or stripped elevation screws.
Cons
- Limited Compatibility: Officially only guaranteed to work with Kensight rear sights.
- Small Size: Easy to lose if dropped during installation.
Who Should Buy Kensight Glock Adjustable Rear Sight Elevation Screw?
The Kensight Glock Adjustable Rear Sight Elevation Screw is perfect for Glock owners with Kensight adjustable rear sights who:
- Need to fine-tune their pistol’s elevation for optimal accuracy.
- Have a stripped or damaged elevation screw and want a cost-effective replacement.
- Value durable, high-quality components.
- Enjoy customizing and optimizing their firearms.
This product may not be suitable for those who:
- Do not own a Glock with adjustable rear sights.
- Have rear sights from a manufacturer other than Kensight.
- Prefer fixed sights and don’t need elevation adjustment capabilities.
A must-have accessory for installation is a small, high-quality screwdriver or sight adjustment tool.
Conclusion on Kensight Glock Adjustable Rear Sight Elevation Screw
The Kensight Glock Adjustable Rear Sight Elevation Screw is a small but mighty component that delivers on its promise of precise and durable elevation adjustment. For a mere $7.99, it offers a cost-effective solution to restore or enhance the functionality of your Kensight adjustable rear sight. The 4140 Chrome Moly Steel construction ensures longevity. The ease of installation makes it a simple upgrade for any Glock owner.
The price is absolutely justified given the quality and functionality it provides. Replacing an entire rear sight can easily cost upwards of $50 or more.
I would definitely recommend the Kensight Glock Adjustable Rear Sight Elevation Screw to any Glock owner with Kensight adjustable rear sights who needs to fine-tune their elevation or replace a damaged screw. Don’t let a small part compromise your accuracy. Invest in the Kensight screw and experience the difference. Upgrade your Glock today and get back on target!