First Impressions of Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw
The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw might seem like a small, insignificant part, but it’s a critical component for maintaining the accuracy and precision of your Kimber 1911’s adjustable rear sight. Without a properly functioning elevation screw, achieving consistent point of impact at various distances becomes a frustrating, nearly impossible endeavor. This seemingly minor component can significantly impact the overall shooting experience, turning a potentially enjoyable range session into a frustrating waste of ammunition.
I’ve been a 1911 enthusiast and competitive shooter for years, and a common issue I’ve encountered is a stripped or damaged elevation screw on adjustable sights. These screws, often subjected to repeated adjustments and varying environmental conditions, are prone to wear and tear. The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw offered a direct replacement, promising to restore the fine-tuning capabilities of my favorite Kimber.
Upon receiving the small part, I was immediately impressed by its robust construction. It seemed far more substantial than the factory screw it was replacing. The deep, clean threads and precisely machined head gave me confidence in its ability to withstand repeated adjustments without stripping or binding.
Compared to generic replacement screws I’ve used in the past, the Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw immediately stood out due to the Manufacturer, Kensight’s reputation for quality. Generic screws often lack the precise tolerances needed for smooth and reliable adjustments. I chose this Kensight product specifically because I trusted their dedication to manufacturing high-quality 1911 components.
My first impression was overwhelmingly positive. I was excited to install it and see if it would restore the precise adjustability of my Kimber’s rear sight. It felt like a small investment that could make a big difference in my shooting performance.
Real-World Testing: Putting Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw to the Test
First Use Experience
I tested the Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw at my local outdoor shooting range. The range offers distances from 7 yards out to 50, allowing for comprehensive testing of sight adjustments. I focused on adjusting the elevation to compensate for bullet drop at the 25 and 50-yard lines.
The weather was slightly overcast, with a light breeze, providing realistic, non-ideal shooting conditions. The screw installed easily with a properly sized gunsmithing screwdriver. The adjustments were immediately smoother and more precise than with the worn factory screw it replaced. There were no binding or rough spots during the elevation changes.
Initially, I noticed a significant improvement in the consistency of my groupings at 25 yards. The old screw had allowed the rear sight to drift slightly over time. The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw held its position firmly, even after repeated firings of .45 ACP rounds.
Extended Use & Reliability
After several weeks and multiple range sessions, the Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw continues to perform flawlessly. I’ve put approximately 500 rounds downrange since installing it. There have been no signs of loosening, stripping, or any other degradation in performance.
The screw still looks brand new despite the repeated adjustments. I periodically clean the screw and sight assembly with a dry brush and apply a tiny amount of gun oil to the threads. The cleaning and lubrication are primarily preventative.
Compared to my previous experiences with other aftermarket screws, the Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw has been a clear winner. The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw’s superior materials and precise machining translate to vastly improved reliability and longevity. It has significantly exceeded my expectations.
Breaking Down the Features of Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw
Specifications
- Manufacturer: Kensight is known for their high-quality firearm sights and components. Their reputation for precision and durability adds significant value to this seemingly small part.
- Gun Make: Designed specifically for the 1911 platform. This ensures proper fit and function within the 1911’s adjustable rear sight assembly.
- Gun Model: Optimized for the 1911. This guarantees compatibility with a wide variety of 1911 pistols utilizing adjustable target sights.
- Color: Black. The black finish blends seamlessly with most 1911 sight designs, maintaining a consistent aesthetic.
- Fabric/Material: 4140 Chrome Moly Steel. The 4140 Chrome Moly Steel provides exceptional strength and resistance to wear, ensuring long-term durability.
- Gun Type: Pistol. This screw is specifically intended for use with pistol sights, and its dimensions are not suitable for rifle applications.
- Mount Type: Dovetail. The dovetail mount is the standard for many 1911 rear sights, making this screw compatible with those designs.
- Length: .370″ total length. This is the overall length of the screw.
- Head Dimensions: .078″ height x .325″ diameter. These dimensions ensure proper engagement with the sight body without protruding excessively.
- Thread Dimensions: .292″ length x .131″ diameter. Correct thread dimensions are crucial for smooth adjustments and a secure hold.
These specifications matter because they directly impact the functionality and longevity of the rear sight. 4140 Chrome Moly Steel resists deformation under pressure from repeated adjustments. The precise thread dimensions ensure smooth and accurate elevation changes, and proper overall dimensions guarantees a correct fit.
Performance & Functionality
The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw performs its job exceptionally well. The smooth threads and precise head dimensions allow for minute elevation adjustments with consistent and repeatable results.
The main strength of this screw is its ability to restore the fine-tuning capability of an adjustable rear sight. The only area for potential improvement might be offering different head styles for varying sight designs. It has absolutely met my expectations, providing a noticeable improvement over the worn factory screw.
Design & Ergonomics
The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw boasts a simple but effective design. The use of high-quality steel ensures durability, and the precisely machined head provides a good grip for adjustments.
There is no real learning curve involved with this product. Anyone familiar with adjusting a 1911 rear sight will find it intuitive.
Durability & Maintenance
Made from robust steel, the Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw is designed to last. Regular cleaning and light lubrication will help to extend its lifespan even further.
Replacing the screw is a straightforward process that most gun owners can handle themselves with the proper tools. Finding a replacement screw with the same dimensions and thread pitch might prove difficult.
Accessories and Customization Options
This product is a replacement part and doesn’t typically come with accessories. There are no specific customization options available for this particular screw.
It is designed to work with Kensight and Kimber adjustable rear sights. I am not aware of compatibility with other aftermarket sights.
Pros and Cons of Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw
Pros
- Restores Precise Elevation Adjustments: Allows for fine-tuning of the rear sight for optimal accuracy at various distances.
- **Durable *4140 Chrome Moly Steel* Construction:** Ensures long-lasting performance and resistance to wear and tear.
- Easy Installation: Can be easily installed by most gun owners with basic tools.
- Improved Shooting Consistency: Helps maintain a consistent point of impact, leading to better accuracy.
- Affordable Solution: A cost-effective way to repair or upgrade an adjustable rear sight.
Cons
- Limited Compatibility: Specifically designed for Kensight and Kimber adjustable rear sights.
- Small Part: Easy to lose during installation if not handled carefully.
Who Should Buy Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw?
The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw is perfect for 1911 owners with Kensight or Kimber adjustable rear sights who are experiencing issues with elevation adjustments. This includes competitive shooters, target shooters, and anyone who values precise sight adjustments for optimal accuracy.
This product might not be necessary for individuals who are content with fixed sights or those who don’t frequently adjust their rear sight elevation. This is a replacement part specifically designed for Kensight and Kimber sights.
A set of high-quality gunsmithing screwdrivers is a must-have for proper installation to avoid damaging the screw head or sight. A small amount of gun oil or grease for lubricating the threads is also recommended to ensure smooth adjustments.
Conclusion on Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw
The Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw is an essential replacement part for anyone seeking to restore or maintain the precise elevation adjustments of their Kensight or Kimber adjustable rear sight. Its durable construction, easy installation, and noticeable improvement in shooting consistency make it a worthwhile investment.
At $7.99, the price is more than justified, especially considering the potential improvement in accuracy and shooting enjoyment. A damaged elevation screw can render an adjustable sight nearly useless. This is a far more cost-effective solution than replacing the entire sight.
I would wholeheartedly recommend the Kensight Kimber Adjustable Target 1911 Rear Sight Elevation Screw to any 1911 owner experiencing issues with their adjustable rear sight. Don’t let a small, worn-out screw compromise your shooting performance – invest in this affordable and effective replacement today!