Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles Review

First Impressions of Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles

The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles promises a straightforward and affordable solution for mounting optics on these popular rifles. Monstrum has built a reputation for providing budget-friendly options, and this mount aims to deliver reliable performance without breaking the bank. My initial curiosity stemmed from wanting a solid, no-frills mount for a Savage Axis project rifle I was building, prioritizing function over fancy features.

I was looking for a simple, reliable, and inexpensive way to mount a scope on my Savage Axis. Many aftermarket options are expensive and, frankly, overkill for a budget-friendly rifle like the Axis. The Monstrum mount seemed to strike a good balance between affordability and functionality.

Unboxing the Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles, I was immediately struck by its lightweight design. The 6061 aircraft-grade aluminum felt solid enough, and the black finish was clean and even. The overall build quality appeared decent for the price point.

Compared to more expensive options like those from Leupold or Weaver, the Monstrum mount definitely felt less refined. However, those mounts cost significantly more, and I suspected the Monstrum mount could provide adequate performance for my needs. I chose the Monstrum because of its dedicated design for the Savage Axis/Edge rifles and its significantly lower price compared to universal or more premium mounts.

My first impression was cautiously optimistic. The mount seemed well-made for the price, but I reserved full judgment until I could test it on the range. I was hoping it would provide a stable and repeatable mounting platform for my scope, allowing me to get the most out of my Savage Axis.

Check Best Price HERE

Real-World Testing: Putting Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles to the Test

First Use Experience

I tested the Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles at my local outdoor shooting range. The weather was mild and dry, providing ideal conditions for sighting in my rifle. I mounted a basic 3-9×40 scope to the mount and then attached the entire assembly to my Savage Axis.

Installation was straightforward, utilizing the factory mounting holes on the rifle. However, I made sure to use a torque wrench to tighten the set screws to the manufacturer’s recommended specifications to prevent any slippage. The mount held the scope securely during the initial sighting-in process. No issues were apparent during the first 50 rounds.

Extended Use & Reliability

After several months of use, including multiple range trips and a weekend hunting trip, the Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles has held up reasonably well. There are a few minor scratches on the finish, but no significant signs of wear and tear. The mount continues to hold zero, even after being subjected to some rough handling in the field.

Cleaning the mount is simple; a quick wipe-down with a cloth is all that’s needed. The aluminum construction seems resistant to corrosion. While it doesn’t offer the rock-solid feel of a high-end mount, it has certainly exceeded my initial expectations, especially considering the price.

Breaking Down the Features of Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles

Specifications

• The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles is constructed from 6061 aircraft-grade aluminum. This provides a good balance of strength and lightweight performance.
• It is finished in a matte black color. This helps reduce glare and provides a tactical look.
• The mount weighs in at 3.1 oz. The low weight minimizes the overall weight added to the rifle.
• It has a height of 1.13 inches, providing adequate clearance for most scopes. This is an important factor for comfortable shooting.
• The mount’s length is 6.5 inches. This allows for flexible scope placement.
• It is designed specifically for Savage Edge and Savage Axis rifles. This ensures a proper fit and secure mounting.
• The mount is ambidextrous. It doesn’t favor left- or right-handed shooters.
• It is designed for rifles. This limits it’s application to centerfire and rimfire rifles.
• The mount is designed for 1-inch diameter scopes. Confirm scope compatibility.

These specifications matter because they directly impact the mount’s weight, durability, and compatibility. The 6061 aluminum offers good strength without adding excessive weight, while the precise dimensions ensure a proper fit on Savage Axis/Edge rifles.

Performance & Functionality

The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles performs its primary function adequately: securely mounting a 1-inch scope to a Savage Axis or Edge rifle. It holds zero reasonably well and provides a stable platform for accurate shooting. While it may not be as rock-solid as more expensive options, it is more than sufficient for most recreational shooters and hunters.

The main strength of this mount is its simplicity and affordability. It’s easy to install and requires minimal maintenance. The potential weakness is its long-term durability compared to higher-end mounts made from more robust materials.

The Monstrum mount meets my expectations for a budget-friendly scope mounting solution. It provides reliable performance without breaking the bank.

Design & Ergonomics

The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles features a straightforward and functional design. The aluminum construction keeps the weight down, and the matte black finish is aesthetically pleasing.

The mount is user-friendly and requires no special tools or skills for installation. There is no learning curve.

Durability & Maintenance

The 6061 aircraft-grade aluminum is reasonably durable and should withstand normal use. However, it is not as resistant to scratches and dings as steel.

Maintaining the mount is simple; a quick wipe-down with a cloth is usually all that’s needed. If necessary, a mild solvent can be used to remove stubborn dirt or grime.

Accessories and Customization Options

The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles does not come with any accessories beyond the necessary set screws for installation. It is designed to be a standalone mounting solution.

The mount is compatible with any 1-inch diameter scope. There aren’t many other customization options outside of that.

Pros and Cons of Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles

Check Best Price HERE

Who Should Buy Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles?

The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles is perfect for budget-conscious shooters and hunters who want a reliable and affordable scope mounting solution for their Savage Axis or Edge rifles. It’s also a good choice for those who are new to scope mounting and want a simple and easy-to-install option.

This product might not be suitable for shooters who demand the highest level of precision and durability, such as competitive shooters or those who subject their rifles to extreme conditions. These users may want to consider investing in a higher-end mount made from more robust materials.

A must-have accessory would be a torque wrench to ensure proper tightening of the set screws. Overtightening can damage the mount or rifle receiver.

Conclusion on Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles

The Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles provides a solid value proposition for Savage Axis and Edge rifle owners. It delivers reliable performance at an exceptionally affordable price point. While it may not have all the bells and whistles of more expensive mounts, it gets the job done and is perfect for those on a budget.

For $14.95, the price is absolutely justified. It’s hard to find a comparable scope mount at this price point that offers the same level of functionality and ease of use.

I would personally recommend the Monstrum 1in Scope Mount for Savage Arms Axis/Edge Rifles to anyone looking for a budget-friendly scope mounting solution for their Savage Axis or Edge rifle. It’s a great option for recreational shooters, hunters, and anyone who wants to get the most out of their rifle without breaking the bank. Give it a try and see for yourself!