First Impressions of MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts
The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts is a seemingly small but essential piece of kit designed to integrate two high-end pieces of equipment: the Send iT MV3 level and Spuhr scope mounts. As someone deeply entrenched in the world of precision shooting, I’m always on the lookout for solutions that enhance accuracy and efficiency in the field. The bracket promises a streamlined and robust method for mounting the Send iT MV3 directly to a Spuhr mount, eliminating the need for Picatinny rails and potentially improving overall stability.
For years, I’ve struggled with clunky setups that required multiple adapters to get my scope level exactly where I wanted it. This often led to added weight and potential points of failure. When I first saw the MDT LRA S90 Bracket, I was immediately intrigued by its minimalist design and the promise of a more direct and secure attachment.
Upon receiving the package, my first impression was positive; the bracket itself is small, lightweight, and appears to be meticulously machined. The black anodized finish is clean and professional. Compared to using a separate Picatinny rail section and rings, this seems like a much more elegant solution. I had been considering using an aftermarket Picatinny rail adapter for my Spuhr, but this dedicated bracket looked like it offered a more integrated and stable solution.
I was excited to test if this product could deliver on its promise of simplifying my setup and improving accuracy. I hoped to experience a more streamlined and secure way to mount my Send iT MV3 level, and I was eager to see if it would make a tangible difference in my shooting.
Real-World Testing: Putting MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts to the Test
First Use Experience
I tested the MDT LRA S90 Bracket during a precision rifle competition held at a local shooting range. The conditions were challenging, with gusting winds and varying light conditions that demanded precise adjustments. I used the bracket to mount my Send iT MV3 level onto my Spuhr SP-4002 mount, which was securing a high-end optic on my precision rifle.
The initial installation was straightforward, following the provided instructions closely. However, I did have to double-check the screw lengths to ensure they didn’t bottom out against the scope tube, a critical step MDT explicitly warns about. Once properly installed, the setup felt rock-solid. During the competition, the level remained secure and provided reliable feedback, allowing me to make quick and accurate adjustments for cant. The integrated design felt much more streamlined than my previous setup.
Extended Use & Reliability
After several months of regular use, including multiple range trips and a hunting excursion, the MDT LRA S90 Bracket has proven to be a reliable and durable addition to my setup. I’ve noticed no signs of loosening or shifting, even after prolonged exposure to recoil and the elements. The anodized finish has held up well, showing minimal wear despite regular handling and transport.
Maintenance has been minimal; a simple wipe-down with a clean cloth after each use is all that’s required. I’ve occasionally checked the screw torque to ensure everything remains secure. Compared to my previous setup using a Picatinny rail section, the S90 Bracket has significantly reduced the bulk and complexity of my mounting system. This has led to a more streamlined and efficient shooting experience. I can confidently say it has outperformed my expectations and delivered on its promise of a more stable and integrated solution.
Breaking Down the Features of MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts
Specifications
- The MDT LRA S90 Bracket is specifically designed to mount the Send iT MV3 level directly to Spuhr SP, SA, SS, and ST model mounts. This eliminates the need for an intermediary Picatinny rail section, reducing overall height and complexity.
- It is constructed from lightweight aluminum with a durable black anodized finish. This ensures both strength and corrosion resistance, crucial for reliable performance in various environmental conditions.
- The bracket weighs only 0.054 lb, adding negligible weight to the overall setup. This is a significant advantage for shooters who prioritize minimizing weight, especially in field applications.
- The package includes two 4mm x 10mm flat head screws for attaching the bracket to the Spuhr mount. It also includes one #8-32 Flat head screw for attaching the Send iT MV3 to the bracket.
Performance & Functionality
The MDT LRA S90 Bracket performs its primary function exceptionally well, providing a secure and stable platform for the Send iT MV3 level. Its direct-mount design significantly reduces any potential for play or movement. This ensures accurate and consistent readings, critical for long-range precision shooting.
The bracket’s only potential weakness lies in its specific compatibility; it’s designed exclusively for Send iT MV3 levels and Spuhr mounts. If you’re not using both of these systems, this bracket is not for you. Overall, the MDT LRA S90 Bracket far exceeds expectations by offering a more robust and streamlined solution than using traditional Picatinny rail adapters.
Design & Ergonomics
The MDT LRA S90 Bracket’s design is simple, yet highly effective. The use of lightweight aluminum keeps the overall weight down, while the black anodized finish provides a durable and professional appearance. The compact size of the bracket minimizes bulk and interference with other accessories on the rifle.
The installation process is straightforward, although carefully checking screw lengths as the Manufacturer recommends is essential to prevent damage. The bracket integrates seamlessly with both the Send iT MV3 and Spuhr mounts, creating a cohesive and ergonomic setup. The learning curve is minimal, making it easy for anyone familiar with these systems to install and use.
Durability & Maintenance
Constructed from high-quality aluminum, the MDT LRA S90 Bracket is built to withstand the rigors of regular use in demanding environments. The black anodized finish provides excellent corrosion resistance, ensuring long-term durability. With proper care, this bracket should last for many years.
Maintenance is simple, requiring only occasional cleaning and inspection of the screws. No special tools or procedures are needed. The bracket’s robust construction and ease of maintenance contribute to its overall value and longevity.
Accessories and Customization Options
The MDT LRA S90 Bracket is designed to be a direct mounting solution, so it doesn’t offer extensive customization options itself. However, its integration with the Send iT MV3 and Spuhr mounts allows for a high degree of customization within the overall system. Users can choose from various Spuhr mount heights and configurations.
The Send iT MV3 level can be further customized with different display settings and sensitivity levels. While the bracket itself doesn’t directly interface with other accessories, it plays a crucial role in creating a stable and optimized mounting platform for the entire system. The compatibility with high-quality components makes it a valuable addition for precision shooters.
Pros and Cons of MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts
Pros
- Provides a secure and stable mounting platform for the Send iT MV3 level. Eliminates potential play or movement compared to using Picatinny rail adapters.
- Lightweight aluminum construction minimizes added weight. This is crucial for maintaining a balanced and maneuverable rifle.
- Direct-mount design reduces overall height and complexity. This creates a more streamlined and ergonomic setup.
- Durable black anodized finish provides excellent corrosion resistance. This ensures long-term reliability in various environmental conditions.
- Easy to install and maintain with minimal effort. This simplifies the setup process and reduces maintenance requirements.
Cons
- Limited compatibility, only works with Send iT MV3 levels and Spuhr SP, SA, SS, and ST mounts. This makes it useless for users with other brands or setups.
- Requires careful attention to screw lengths during installation to avoid damaging the scope. The Manufacturer’s warning must be heeded.
Who Should Buy MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts?
The MDT LRA S90 Bracket is perfect for precision rifle shooters and competitive shooters who use both Send iT MV3 levels and Spuhr mounts. These shooters will benefit from the streamlined, stable, and lightweight mounting solution it provides. Anyone seeking to optimize their rifle setup for maximum accuracy and efficiency will find this bracket a valuable addition.
This product is not for those who do not use both Send iT MV3 levels and Spuhr mounts, as the bracket is specifically designed for this combination. It’s also not necessary for casual shooters who don’t require the level of precision and stability it offers.
A must-have accessory to use the bracket is, naturally, the Send iT MV3 level itself. Also, ensure you have a high-quality torque wrench for proper screw installation.
Conclusion on MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts
The MDT LRA S90 Bracket for the Send iT MV3 & Spuhr Mounts is a well-designed and effective solution for integrating these two high-end components. Its direct-mount design, lightweight construction, and durable finish make it a valuable addition to any precision rifle setup. The value proposition is strong, especially for those who prioritize accuracy, stability, and a streamlined design.
I would personally recommend this product to any serious precision shooter using Send iT MV3 levels and Spuhr mounts. It simplifies the mounting process, improves stability, and ultimately enhances the overall shooting experience. If you’re looking to take your precision shooting to the next level, the MDT LRA S90 Bracket is a worthwhile investment. Upgrade your setup today and experience the difference!