First Impressions of MDT MV3 90 Mount
The MDT MV3 90 Mount promises a solution to a common problem faced by precision shooters using the Send iT MV3 level: its awkward lateral positioning. MDT, known for its robust and practical chassis systems, has stepped in to offer a vertical mounting solution that tucks the level neatly alongside the scope. This mount immediately caught my eye as a potential fix to a design flaw in an otherwise excellent product.
I’ve used various electronic levels over the years, always searching for that perfect balance of accuracy and convenience. My main issue with the laterally mounted Send iT MV3 was its vulnerability; I was constantly worried about snagging it on gear or damaging it during transport. The MDT MV3 90 Mount appeared to offer a safer, more streamlined alternative.
Unboxing the mount revealed a simple, cleanly machined piece of aluminum. The MDT MV3 90 Mount felt solid and well-constructed, reflecting MDT‘s reputation for quality. Compared to other similar mounts, like some DIY solutions I’ve seen online, this one exuded a professional finish and a clearly thought-out design.
My initial excitement was tempered by a slight concern about the required scope clearance, but overall, my first impression was positive. I was eager to test its practicality in the field and see if it lived up to its promise of protecting the Send iT MV3.
Real-World Testing: Putting MDT MV3 90 Mount to the Test
First Use Experience
My first test of the MDT MV3 90 Mount took place at my local shooting range, a mix of covered benches and open-air positions. The weather was typical for the Pacific Northwest: overcast with a light drizzle. I mounted the Send iT MV3 onto the MDT MV3 90 Mount, then attached the whole assembly to a Picatinny rail section on my precision rifle.
Immediately, I appreciated the improved ergonomics. The rifle felt much more balanced without the Send iT sticking out to the side. The LEDs of the Send iT were also much easier to see, all being the same distance from my eye. Initial zeroing was also easier with the level sitting vertically. No issues with the Send iT being blocked when chambering.
After the first few shots, I noticed the mount remained secure with no movement detected. I was impressed with how the vertical positioning made it less susceptible to bumps and accidental adjustments compared to its previous setup.
Extended Use & Reliability
After several months of use, spanning multiple range trips and a short hunting excursion, the MDT MV3 90 Mount has proven to be a reliable addition to my rifle setup. There are no signs of wear and tear on the aluminum body beyond some minor scuffs, testament to the Aluminum construction. The mount remains securely attached, and there has been no shift in zero.
Maintenance is practically nonexistent; a quick wipe down with a cloth is all it needs. Compared to my previous setup, where I was constantly checking the Send iT for damage, this mount has significantly reduced my worries. It has definitely outperformed my expectations in terms of durability and protection.
Breaking Down the Features of MDT MV3 90 Mount
Specifications
The MDT MV3 90 Mount is specifically designed for use with the Send iT MV3 electronic level. Its key specifications include:
- Manufacturer: MDT
- Color: Black
- Fabric/Material: Aluminum
- Weight: 0.074 lb
- Tube Diameter: 34 mm (with variations for standard and extended models)
- Clearance Requirement: 0.3″ between the scope tube and the top of the Picatinny rail.
These specifications are critical for ensuring proper fit and functionality. The Aluminum construction ensures durability without adding excessive weight to the rifle. The tube diameter compatibility is important as it dictates which scopes the mount can be used with, while the clearance requirement determines if the mount will fit on your specific rifle setup.
Performance & Functionality
The MDT MV3 90 Mount excels at its primary function: securely positioning the Send iT MV3 vertically to the side of the scope tube. This provides several key advantages.
- Protection: The vertical placement protects the Send iT from accidental bumps and damage.
- Improved Ergonomics: It streamlines the rifle profile, making it more balanced and easier to handle.
- Enhanced Visibility: The LEDs of the Send iT are easier to see when viewed from the side.
The mount performs flawlessly, holding the Send iT securely and maintaining its position throughout rigorous shooting sessions. The only area for potential improvement would be offering variations for different scope tube sizes to further optimize the fit.
Design & Ergonomics
The MDT MV3 90 Mount features a simple, functional design that prioritizes usability. The Aluminum construction keeps the weight down, and the black finish blends seamlessly with most rifle setups. It’s also extremely compact, adding very little bulk.
The mount is user-friendly, requiring minimal effort to install and adjust. There is virtually no learning curve; even novice shooters can easily attach it to their rifles.
Durability & Maintenance
The Aluminum construction of the MDT MV3 90 Mount ensures long-lasting durability. The mount can withstand the rigors of regular use without showing signs of wear and tear. Regular maintenance involves only a simple wipe down to remove dirt and debris.
This is a robust piece of kit that should last for years with proper care. The simplicity of its design also minimizes the potential for mechanical failure.
Accessories and Customization Options
The MDT MV3 90 Mount doesn’t come with any additional accessories beyond the necessary mounting hardware. Customization options are limited, as it is specifically designed for use with the Send iT MV3.
However, the mount’s Picatinny rail attachment point allows it to be used with a wide range of rifles and chassis systems that have Picatinny rail sections. It’s also available in two versions: standard and extended, accommodating different scope and eyepiece diameters.
Pros and Cons of MDT MV3 90 Mount
Pros
- Protects the Send iT MV3 level from damage.
- Improves rifle ergonomics by streamlining its profile.
- Enhances visibility of the Send iT’s LEDs.
- Durable Aluminum construction.
- Easy to install and use.
Cons
- Requires specific scope clearance to fit properly.
- Limited to use with the Send iT MV3 model only.
Who Should Buy MDT MV3 90 Mount?
The MDT MV3 90 Mount is perfect for precision shooters and long-range enthusiasts who already own the Send iT MV3 electronic level and are looking for a more robust and ergonomic mounting solution. This is a must-have for anyone who wants to protect their investment and improve the overall handling of their rifle.
Those who should skip this product include users of the original Send iT or the XSL model, as this mount is specifically designed for the MV3. Also, individuals with rifle setups that don’t meet the required scope clearance may need to explore alternative mounting options.
A must-have accessory for this mount is a torque wrench to ensure proper tightening of the mounting screws without damaging the Aluminum body.
Conclusion on MDT MV3 90 Mount
The MDT MV3 90 Mount is a well-designed and practical accessory that solves a common problem for users of the Send iT MV3 electronic level. Its durable construction, improved ergonomics, and enhanced protection make it a worthwhile investment.
At $53.99, the price is justified given the benefits it provides. I would personally recommend this mount to anyone using the Send iT MV3 who values the protection of their equipment and the improved handling of their rifle.
If you’re tired of worrying about damaging your Send iT and want a more streamlined setup, the MDT MV3 90 Mount is the answer. Get yours today and experience the difference!