First Impressions of Burris XTR II & III Veracity 42mm Lens Covers
The Burris XTR II & III Veracity 42mm Lens Covers promise to protect your valuable optic from the elements and accidental damage. Burris is a respected name in the optics industry, and I was hoping these lens covers would provide a secure and reliable fit for my scopes. However, finding the right lens cover can be frustrating, as sizing inconsistencies are common across different brands.
I recently invested in a Burris Veracity scope and wanted to ensure its lenses were protected during storage and transport. I was specifically looking for a set of covers that would offer a snug fit and easy operation, without adding unnecessary bulk. I had considered universal flip-up covers, but I preferred the cleaner look and potentially more secure fit of covers designed specifically for the XTR II and Veracity lines.
Upon receiving the Burris XTR II & III Veracity 42mm Lens Covers, my initial reaction was mixed. The matte black plastic felt reasonably durable, but surprisingly lightweight. Compared to some of the higher-end metal or rubberized lens covers I’ve used in the past, these felt somewhat basic.
I had also considered lens covers from Butler Creek and Vortex. I chose the Burris covers hoping for a perfectly tailored fit, eliminating the slight wiggle I’ve experienced with some universal options. I was optimistic, but also slightly apprehensive, given the mixed reviews I’d seen online regarding fitment issues.
My first impression was one of mild disappointment; they looked and felt like a generic, inexpensive accessory. My biggest fear was confirmed when I attempted to install them – they simply didn’t fit my 42mm Burris scope properly. This initial setback made me question the overall value and quality control of the product.
Real-World Testing: Putting Burris XTR II & III Veracity 42mm Lens Covers to the Test
First Use Experience
My first “use” was actually an attempt to install the covers on my Burris Veracity 42mm scope at my workbench. The problem was immediately apparent: the covers were too small to fit over the objective and ocular lenses. This made any real-world testing impossible from the start.
Since they didn’t fit, I couldn’t evaluate performance in wet, cold, or dusty conditions. I was hoping they’d create a tight seal against moisture and debris. Instead, I was left with useless pieces of plastic.
There was no ease of use, as I couldn’t even get them onto the scope. A product designed for lens protection should be easy to install and remove. These covers failed at the most basic requirement.
My immediate surprise was the significant sizing discrepancy. I expected a snug fit but instead encountered a completely unusable product. This raised serious questions about Burris’s quality control and the accuracy of the product description.
Extended Use & Reliability
Since the Burris XTR II & III Veracity 42mm Lens Covers didn’t fit, extended use and reliability testing were impossible. They remain unused and are essentially a paperweight. This renders any assessment of long-term durability or maintenance moot.
I cannot comment on wear and tear because the covers have never been used in the field. Typically, I would expect to see some minor scratches or scuffs after prolonged use. Sadly, these were DOA.
Maintenance is a non-issue. Usually, lens covers might require occasional cleaning to remove dirt or fingerprints. These covers, however, require nothing because they are not even on a scope.
These Burris lens covers were a significant disappointment compared to past experiences. I’ve used various lens protection solutions, and even generic options provided better initial usability than these. This experience has made me hesitant to purchase Burris accessories in the future without thorough verification of fitment.
Breaking Down the Features of Burris XTR II & III Veracity 42mm Lens Covers
Specifications
The Burris XTR II & III Veracity 42mm Lens Covers, manufactured by Burris, are designed to protect the lenses of compatible scopes. They feature a matte black finish and are constructed from plastic. The covers are advertised as fitting 42mm objective lenses on the Burris XTR II and Veracity series of scopes.
The matte finish is intended to reduce glare and reflections. The plastic construction aims for a balance of durability and lightweight design. The specified compatibility with 42mm lenses is crucial for ensuring a secure and functional fit, but, as I discovered, this is a point of failure.
Performance & Functionality
In theory, the Burris XTR II & III Veracity 42mm Lens Covers should perform the simple job of protecting scope lenses. However, in my experience, they failed to do even that. This means they are neither accurate, reliable, nor usable.
The only strength one could possibly argue is their potential to offer protection if they fit. The major weakness is the inaccurate sizing, rendering them completely ineffective. They not only fail to meet expectations, but also actively disappoint.
Design & Ergonomics
The build quality appears adequate for basic plastic lens covers. However, the lightweight feel contributes to a perception of cheapness. Their user-friendliness is nonexistent, as the sizing issue prevents installation.
Durability & Maintenance
Assuming the plastic material is of reasonable quality, the covers should last a decent amount of time under normal use. Maintenance would likely be minimal, requiring only occasional cleaning. But again, the fit issue overshadows any potential benefits.
Accessories and Customization Options
The Burris XTR II & III Veracity 42mm Lens Covers are a standalone accessory and do not include any additional components. There are no customization options available for these covers. They are intended solely for their stated purpose of protecting compatible scope lenses, a purpose they fail to achieve in my case.
Pros and Cons of Burris XTR II & III Veracity 42mm Lens Covers
Pros
- Potentially provides lens protection from dust and scratches.
- Potentially offers a clean and streamlined aesthetic.
- Lightweight design.
- Matte finish to reduce glare.
- Easy to clean (if you could actually use them).
Cons
- Inaccurate sizing; does not fit advertised 42mm scopes.
- Feels cheaply made.
- A complete waste of money.
Who Should Buy Burris XTR II & III Veracity 42mm Lens Covers?
These lens covers are theoretically perfect for Burris XTR II and Veracity scope owners who need basic lens protection. They should be a suitable accessory for hunters, target shooters, and anyone using these scopes in environments where dust, debris, or moisture are present. However, given my experience, I would strongly caution against purchasing these without verifying the fit first.
Anyone with a 42mm Burris scope should skip this product unless they can confirm a proper fit beforehand. The risk of receiving a mismatched set of covers is too high to justify the purchase. A universal option might be a safer bet.
A must-have alternative would be a set of properly sized lens covers, regardless of brand. Until Burris addresses the sizing issues, these covers are essentially useless.
Conclusion on Burris XTR II & III Veracity 42mm Lens Covers
My experience with the Burris XTR II & III Veracity 42mm Lens Covers was extremely disappointing. The fundamental problem is the inaccurate sizing, rendering the product unusable. While the concept is sound, the execution falls far short of expectations.
At $11.99, the price isn’t exorbitant, but it’s still a waste of money when the product doesn’t function as advertised. The value proposition is nonexistent, considering the covers failed to fit the intended scopes.
Based on my experience, I cannot recommend these lens covers. The sizing issues make them a gamble, and there are far better and more reliable options available on the market. I would advise potential buyers to proceed with extreme caution and explore alternative lens protection solutions.