Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish Review

First Thoughts on the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish promises to enhance the ergonomics and capacity of some of Glock’s most popular subcompact pistols. For concealed carry enthusiasts and those with larger hands, the allure of added grip surface and increased round count in a compact package is undeniable. This small, inexpensive accessory from Pachmayr aims to bridge the gap between concealability and shootability, something I’ve long sought for my Glock 27.

My journey to the Pachmayr grip extender began with a familiar frustration. The Glock 27, while perfectly sized for concealed carry, always felt a little too small in my hand. The dreaded “pinky dangle” compromised my grip and, consequently, my accuracy, particularly during rapid fire drills.

Upon receiving the extender, I immediately appreciated its simple, no-frills design. The black polymer seamlessly matched the Glock’s frame. The weight felt negligible, and the build quality seemed robust enough to withstand regular use. Compared to other grip extensions I’d seen, the Pachmayr appeared less bulky and more integrated, a crucial factor for maintaining the pistol’s concealability.

I chose the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish over Pearce Grip extensions primarily for the Pachmayr‘s reputation for a more factory-like fit and finish. I also considered a complete magazine replacement with a built-in extension, but the added cost made the Pachmayr a more attractive and cost-effective initial solution. My first impression was cautiously optimistic; I hoped it would deliver on its promise of improved grip and capacity without sacrificing the Glock’s inherent reliability and concealability.

Real-World Testing: Putting Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish to the Test

First Use Experience

My first range trip with the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish installed was at my local outdoor range. The weather was typical for a Texas summer – hot and humid. I ran several drills, including target acquisition, rapid fire, and controlled pairs, focusing on how the extender affected my grip and recoil management.

The immediate improvement was noticeable. My pinky now had a secure place to grip, dramatically enhancing my control. Recoil felt more manageable, and I was able to achieve faster and more accurate follow-up shots. There were no immediate issues; the extender stayed securely in place, and the magazine fed flawlessly.

Extended Use & Reliability

After several months of regular use, including weekly range sessions and carrying the Glock 27 with the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish installed, it has held up surprisingly well. The polymer shows no signs of cracking or significant wear, despite frequent magazine changes and exposure to sweat and holster friction.

The extender has remained firmly attached to the magazine, requiring no additional adhesive or modification. Maintenance is simple; a quick wipe down with a damp cloth is all it takes to keep it clean. Compared to my previous experience with the bare Glock 27 grip, the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish significantly outperforms in terms of comfort, control, and overall shootability. It’s a small investment that yields a substantial improvement.

Breaking Down the Features of Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish

Specifications

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish is a polymer extension designed to fit Glock subcompact pistols in 9mm, .40 S&W, and .357 SIG. Specifically, it is compatible with Glock models 26, 27, 33, and 39. The extender adds approximately half an inch to the overall grip length.

It also increases magazine capacity by two rounds. The finish is a matte black that closely matches the factory Glock frame. The product itself weighs less than an ounce, adding negligible weight to the firearm.

Performance & Functionality

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish significantly improves the ergonomics and handling of the Glock subcompact pistols. The added grip length allows for a full-handed grip, leading to better control and reduced muzzle flip. Accuracy is notably improved, especially during rapid firing.

The extender integrates seamlessly with the existing magazine, maintaining reliable feeding and ejection. While the two-round capacity increase is a bonus, the primary benefit is the enhanced grip. This extender certainly meets and exceeds expectations for a simple, inexpensive accessory.

Design & Ergonomics

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish boasts a simple, functional design. The polymer construction is both lightweight and durable. The textured surface provides a secure grip, even in wet or sweaty conditions.

The installation is straightforward and requires no special tools. The extender slides onto the existing magazine, locking into place with a secure fit. There is a slight learning curve associated with reloading, as the magazine sits slightly higher than before.

Durability & Maintenance

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish is made from a durable, high-strength polymer. It is designed to withstand the rigors of regular use and carry. Maintenance is simple, requiring only occasional cleaning with a damp cloth.

Given the low cost of the extender, replacement is a viable option should it ever become damaged. However, based on my experience, it should last for years with proper care.

Accessories and Customization Options

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish itself doesn’t require any additional accessories. It is designed to work with the existing factory magazine and components. While there are no direct customization options for the extender itself, it can be paired with other Glock accessories such as aftermarket sights, triggers, and holsters.

The most crucial accessory to consider is a magazine pouch or holster that accommodates the slightly longer grip. Many standard Glock 26/27 holsters will still work, but some may require slight modification or replacement.

Pros and Cons of Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish

Check Best Price HERE

Who Should Buy Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish?

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish is perfect for Glock 26/27/33/39 owners who find the stock grip too short or uncomfortable. It is also ideal for concealed carry permit holders seeking improved control and accuracy without significantly increasing the pistol’s size. This extender is a great option for those with larger hands who struggle to get a full grip on the subcompact Glock frame.

Those who prioritize maximum concealability above all else may want to skip this product. Also, individuals who are already comfortable and proficient with the stock Glock grip may not find the upgrade necessary. A magazine pouch or holster that fits the extended grip is a must-have accessory to fully utilize the benefits of the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish.

Conclusion on Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish

The Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish is a simple, inexpensive, and highly effective upgrade for Glock subcompact pistols. It addresses the common complaint of a short grip, providing enhanced control, improved accuracy, and a slightly increased capacity. At a price of $8.49, the value proposition is undeniable.

I would wholeheartedly recommend the Pachmayr Grip Extender For Glock 26/27/33/39(+2rds) Black Finish to any Glock 26/27/33/39 owner seeking to improve their shooting experience. Upgrade your Glock today and experience the difference a full grip can make!

Check Best Price HERE