Let’s Talk About Taylor Made 45993 Dock Edging Standard inPin Shape
The Taylor Made 45993 Dock Edging Standard inPin Shape is a crucial component for anyone maintaining or building a dock. This ten-foot section of white EPDM rubber provides essential protection against impacts, preventing damage to both your boat and the dock structure itself. Taylor Made promises high-quality materials and easy installation, features I was keen to verify.
My old dock was starting to show its age, with splintered edges and exposed concrete threatening to scratch my boat’s hull. I needed a durable, easy-to-install edging solution to prevent further damage. I’d seen similar products made from flimsy PVC, but I was looking for something more substantial.
The initial impression was positive. The Taylor Made 45993 Dock Edging Standard inPin Shape felt dense and resilient. The white color was clean and bright.
I considered cheaper PVC options and even some recycled rubber alternatives before settling on this. I chose the Taylor Made edging because of the promise of EPDM’s superior durability and resistance to the elements. I was initially excited about the potential for a long-lasting solution that would protect my investment.
Real-World Testing: Putting Taylor Made 45993 Dock Edging Standard inPin Shape to the Test
First Use Experience
Installation was straightforward. I tested the Taylor Made 45993 Dock Edging Standard inPin Shape on my existing wooden dock, attaching it with stainless steel screws every 12 inches. The “Pin Shape” design fit snugly against the dock’s edge, creating a clean, professional-looking buffer.
The weather was cooperative during installation, but within a week, we had a severe thunderstorm with high winds and choppy water. The edging held firm, providing a cushion against the waves and preventing any contact between the boat and dock. I noticed immediately that the Taylor Made 45993 Dock Edging Standard inPin Shape was easy to use, needing no special tools other than a drill/driver.
Initially, I was surprised by how easily the edging conformed to the slightly uneven edges of my aging dock. This made the installation process far simpler than I anticipated.
Extended Use & Reliability
After six months of exposure to sun, rain, and saltwater, the Taylor Made 45993 Dock Edging Standard inPin Shape has held up remarkably well. There are no signs of cracking, fading, or deterioration. The EPDM rubber seems to be truly living up to its reputation for weather resistance.
I check the screws every few weeks, but the edging itself requires virtually no maintenance. A quick rinse with a hose removes any accumulated dirt or algae. Compared to the previous PVC edging I used (which became brittle and cracked within a year), this is a significant improvement. The Taylor Made 45993 Dock Edging Standard inPin Shape is outperforming my expectations.
Breaking Down the Features of Taylor Made 45993 Dock Edging Standard inPin Shape
Specifications
The Taylor Made 45993 Dock Edging Standard inPin Shape is a ten-foot length of dock edging made from EPDM rubber. It has a “Pin Shape” profile designed to fit snugly against straight dock edges. The edging is white in color.
The length is ideal for covering a standard section of dock. EPDM rubber offers excellent UV resistance, flexibility, and impact absorption, crucial for dock applications. The white color provides a clean look and helps reflect sunlight, preventing excessive heat buildup.
Performance & Functionality
The primary function of the Taylor Made 45993 Dock Edging Standard inPin Shape is to protect boats and docks from impact damage. It performs this job admirably. The rubber provides a substantial cushion.
The edging’s “Pin Shape” design ensures a secure fit and prevents it from easily dislodging. While the white color can show dirt more readily than darker options, it is easily cleaned. The edging meets and exceeds expectations.
Design & Ergonomics
The Taylor Made 45993 Dock Edging Standard inPin Shape is well-designed for its intended purpose. The EPDM rubber is dense yet flexible, providing both impact protection and ease of installation. The weight is substantial enough to feel durable but not so heavy as to be difficult to handle.
Installation is straightforward. Anyone with basic DIY skills can easily attach it to a dock. There is a slight learning curve related to ensuring consistent screw spacing for a clean, professional look.
Durability & Maintenance
Given its EPDM rubber construction, the Taylor Made 45993 Dock Edging Standard inPin Shape should last for many years. The material is resistant to UV rays, saltwater, and temperature extremes. Minimal maintenance is required.
Occasional cleaning with soap and water will keep it looking its best. Repairs are generally unnecessary unless the edging is subjected to extreme abuse.
Accessories and Customization Options
The Taylor Made 45993 Dock Edging Standard inPin Shape is a fairly simple product and does not come with many accessories. The primary accessory you’ll need is stainless steel screws for installation. While painting is possible, it’s generally not recommended as it may affect the rubber’s flexibility and UV resistance.
The edging is compatible with a variety of screw sizes and types. Choosing stainless steel is highly recommended to prevent corrosion in marine environments.
Pros and Cons of Taylor Made 45993 Dock Edging Standard inPin Shape
Pros
- Provides excellent impact protection for boats and docks.
- EPDM rubber offers superior UV and saltwater resistance for long-lasting durability.
- Easy to install with basic tools.
- The Pin Shape design fits snugly against straight dock edges for a clean, professional look.
- Minimal maintenance required, saving time and effort.
Cons
- The white color can show dirt and algae more readily than darker colors.
- Screws for installation are not included and must be purchased separately.
Who Should Buy Taylor Made 45993 Dock Edging Standard inPin Shape?
The Taylor Made 45993 Dock Edging Standard inPin Shape is perfect for boat owners and dock owners who prioritize durability and long-term protection. It is well-suited for those living in coastal areas or regions with harsh weather conditions. It’s also ideal for anyone looking for an easy-to-install and low-maintenance dock edging solution.
Those seeking a purely aesthetic solution or who have extremely complex dock shapes might want to explore other options. Must-have accessories include high-quality stainless steel screws and a drill/driver.
Conclusion on Taylor Made 45993 Dock Edging Standard inPin Shape
The Taylor Made 45993 Dock Edging Standard inPin Shape is a worthwhile investment for anyone looking to protect their boat and dock from damage. The price is justified by the superior durability and long lifespan of the EPDM rubber. I would absolutely recommend this product to fellow boat owners and dock maintenance professionals.
The Taylor Made 45993 Dock Edging Standard inPin Shape provides peace of mind knowing that my boat and dock are well-protected. Don’t wait until your boat gets scratched or your dock gets damaged – invest in this essential piece of equipment today!