Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop Rh 13″ Dia. x 19″ Pitch x 13 Spline Review

Let’s Dive into Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop Rh 13″ Dia. x 19″ Pitch x 13 Spline

The Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop is designed as a high-quality, durable, and performance-enhancing propeller for a range of boats. Manufactured by Solas, a respected name in marine propulsion, this propeller boasts a 13-inch diameter, a 19-inch pitch, right-hand rotation, and a 13-tooth spline, indicating its suitability for medium to larger horsepower engines. Its squeeze-cast aluminum construction promises enhanced strength and performance compared to standard propellers.

My aging pontoon boat’s original prop was showing its years, causing sluggish acceleration and poor fuel economy. I needed a replacement that offered improved performance without breaking the bank, and the Solas Amita 3 seemed to offer the best blend of quality and value.

Unboxing the Solas propeller, I was immediately struck by the solid feel of the aluminum. The casting appeared clean and well-finished, with no obvious flaws or imperfections. It felt significantly more robust than the lightweight, almost flimsy, prop I was replacing.

I considered other options, including stainless steel props for enhanced durability and specialized designs for specific performance characteristics. Ultimately, I chose the Solas Amita 3 because it promised a noticeable performance improvement for a reasonable price, unlike the much pricier stainless steel alternatives. It also avoids some of the performance trade-offs often found in cheaper, less reputable brands.

My first impression was definitely positive. The Solas Amita 3 appeared to be a well-made, high-quality propeller that promised a tangible upgrade in my boat’s performance.

Check Best Price HERE

Real-World Testing: Putting Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop Rh 13″ Dia. x 19″ Pitch x 13 Spline to the Test

First Use Experience

I tested the Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop on my pontoon boat on a large, relatively calm lake. The weather was typical for early summer – warm with a slight breeze.

The immediate improvement in acceleration was noticeable. The boat planed much quicker, and the engine felt less strained at cruising speed.

Installing the prop was straightforward, requiring only basic tools and a bit of marine grease on the shaft. There were no unexpected issues and the prop fit perfectly.

Extended Use & Reliability

After several months of regular use, the Solas Amita 3 has held up remarkably well. There are no signs of excessive wear or corrosion despite frequent exposure to freshwater.

I’ve run the boat through some shallow, weedy areas (something to avoid, but inevitable sometimes), and the propeller has resisted damage surprisingly well. A few minor scratches are present, but no significant dings or bends.

Cleaning is simple; a quick rinse with fresh water after each use keeps it looking good. Compared to my previous prop, the Solas Amita 3 feels much more durable and performs consistently better.

Breaking Down the Features of Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop Rh 13″ Dia. x 19″ Pitch x 13 Spline

Specifications

• The Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop features a 13-inch diameter, which is critical for matching the prop to the engine’s horsepower and boat’s size. This dimension influences the prop’s ability to effectively push water.
• Its 19-inch pitch refers to the theoretical distance the propeller would advance in one revolution. A higher pitch typically results in greater top speed, while a lower pitch provides better acceleration.
• The propeller is designed with right-hand (RH) rotation, a standard configuration for many boats. This determines the direction the prop spins and is essential for compatibility with the boat’s drive system.
• It incorporates a 13-tooth spline, which connects the propeller to the engine’s drive shaft. The spline count must match the boat’s shaft for proper installation and power transfer.
• The Solas Amita 3 is constructed from squeeze-cast aluminum, enhancing its strength and resistance to corrosion. This process results in a denser, more durable metal.

Performance & Functionality

The Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop significantly enhances my boat’s performance. The improved acceleration and top-end speed make boating more enjoyable and efficient.

Its only weakness is that aluminum props are less durable than stainless steel versions when striking underwater obstacles. However, for typical recreational boating, the performance gain justifies the material choice. It definitely exceeded my expectations for an aluminum prop.

Design & Ergonomics

The Solas Amita 3 boasts a classic three-blade design optimized for a balance of speed and thrust. Its aluminum construction keeps the weight reasonable, making installation and handling easy.

The prop is well-balanced and exhibits minimal vibration during operation, contributing to a smoother ride. The design is straightforward, with no unnecessary complexity, so there’s virtually no learning curve.

Durability & Maintenance

While not as indestructible as stainless steel, the squeeze-cast aluminum construction offers good durability for typical boating conditions. I expect it to last for many seasons with proper care.

Maintenance is minimal; cleaning after use and occasional inspection for damage are all that’s needed. The Solas prop is relatively easy to remove and reinstall for any necessary repairs or replacements.

Accessories and Customization Options

The Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop doesn’t come with any specific accessories. However, it’s compatible with standard propeller hardware like thrust washers and cotter pins.

While you can’t customize the prop’s blade geometry, you can enhance its performance by ensuring proper engine tuning and boat trim. Selecting the correct propeller for your boat’s specific engine and hull configuration is crucial for optimizing overall performance, regardless of brand.

Pros and Cons of Solas 2411-130-19 Amita 3 Aluminum 3 Blade Prop Rh 13″ Dia. x 19″ Pitch x 13 Spline