SIG SAUER Sear SS1202520R Review

Let’s Talk About SIG SAUER Sear SS1202520R

The SIG SAUER Sear SS1202520R is a critical component in the fire control group of many SIG SAUER P-series pistols. This sear, described as a “2deg, Pseries, Super Finish,” promises enhanced performance and reliability. It’s a relatively inexpensive part at $47.99, but its proper function is essential for safe and consistent operation of the firearm.

As an experienced armorer and tactical gear specialist, I’m always looking for ways to improve the reliability and performance of my firearms. I was experiencing some inconsistent trigger pull and occasional failures to reset in my trusty SIG SAUER P226. I suspected the sear might be the culprit. I’d heard whispers online about the SIG SAUER Sear SS1202520R’s improved finish and geometry leading to a crisper, more reliable trigger.

Unfortunately, no unboxing experience occurred, as this component ships typically in a small, nondescript parts bag. Initial inspection revealed a part machined to SIG SAUER’s exacting standards. The “Super Finish” was noticeably smoother than the factory sear it was replacing.

I’ve used aftermarket sears from other manufacturers, like Grayguns and Armory Craft. However, I chose the SIG SAUER Sear SS1202520R this time because I wanted to maintain the original factory tolerances and reliability of my SIG SAUER pistol. I was hoping for a subtle but noticeable improvement in trigger feel without sacrificing reliability.

My first impression was cautiously optimistic. The sear looked and felt like a quality replacement part. I was eager to install it and see if it lived up to the hype.

Check Best Price HERE

Real-World Testing: Putting SIG SAUER Sear SS1202520R to the Test

First Use Experience

My first test of the SIG SAUER Sear SS1202520R took place at my local outdoor range. I installed the sear into my SIG SAUER P226 and ran a series of drills. I focused on trigger control and rapid follow-up shots.

The most noticeable difference was a smoother, more consistent trigger pull. The reset was also crisper and more positive. There were no immediate issues or malfunctions.

Extended Use & Reliability

After several months of regular use, the SIG SAUER Sear SS1202520R has proven to be a reliable upgrade. There are no visible signs of wear or degradation of the finish. Maintenance is straightforward: a simple cleaning and lubrication during regular firearm maintenance.

Compared to the original factory sear, the SS1202520R offers a noticeable improvement in trigger feel and consistency. It hasn’t dramatically changed the overall performance of the pistol, but it has made it more enjoyable to shoot. The slightly improved trigger feel translated to tighter groupings at 15 and 25 yards.

Breaking Down the Features of SIG SAUER Sear SS1202520R

Specifications

The SIG SAUER Sear SS1202520R is a drop-in replacement sear designed for SIG SAUER P-series pistols. It is specifically designed with a 2-degree sear angle that alters the engagement with the hammer. It features a “Super Finish,” which is likely a polishing or coating process to reduce friction and improve smoothness.

The sear’s primary function is to hold the hammer in the cocked position until the trigger is pulled. The 2-degree angle is intended to provide a cleaner trigger break and a more predictable release. The enhanced finish aims to minimize friction and ensure consistent engagement and disengagement. These specifications matter because they directly impact the feel and reliability of the trigger.

Performance & Functionality

The SIG SAUER Sear SS1202520R performs its job admirably. It provides a smoother, more consistent trigger pull than the factory sear it replaced. The sear improved the trigger enough to enhance my shooting experience.

The primary strength is the enhanced trigger feel. A weakness is that it is a subtle change, and may not be noticeable to inexperienced shooters. It met my expectations for a minor improvement in trigger feel and reliability.

Design & Ergonomics

The sear is a small, precisely machined part. It seems well-made and durable. The installation process is relatively straightforward for someone familiar with SIG SAUER P-series firearms.

Durability & Maintenance

The sear is constructed from hardened steel and features a durable finish. It should last for thousands of rounds with proper care. Maintenance is minimal.

Accessories and Customization Options

The SIG SAUER Sear SS1202520R doesn’t directly interface with accessories or allow for customization. It’s a core component within the fire control group. The sear can be used in conjunction with other trigger upgrades, like a lighter hammer spring, for a more comprehensive trigger job.

Pros and Cons of SIG SAUER Sear SS1202520R