Let’s Dive into DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount
The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount is a one-piece scope mounting solution designed specifically for Browning A-Bolt rifles with super short actions. DNZ Products promises enhanced accuracy and a streamlined profile with this mount. Its claim to fame is simplicity and ruggedness.
I had been struggling with scope slippage on my trusty A-Bolt after a particularly rough elk hunt in the Montana backcountry. The factory mounts just weren’t cutting it, and I needed something bombproof that wouldn’t shift zero under harsh conditions. That’s why I decided to give the DNZ Products mount a try.
My first impression upon unboxing was positive; the mount felt solid and well-machined. The single-piece design suggested a significant upgrade in rigidity compared to the two-piece system I was replacing. Its weight was surprisingly light, which is always a bonus on a hunting rifle.
Compared to Leupold’s QRW2 rings or Warne Maxima steel rings, the DNZ Products mount seemed to offer a blend of both lightweight design and robust construction. I chose it over the Leupold due to concerns about the QRW2’s quick-release levers potentially snagging in brush. The DNZ Products mount was chosen over the Warne rings for weight savings.
I was excited to get this mounted and tested; the initial impression was that this would solve my zeroing issues. However, I was also a bit apprehensive about whether the “low” height would accommodate my scope’s objective lens.
Real-World Testing: Putting DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount to the Test
First Use Experience
I tested the DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount at my local shooting range, and then on a subsequent deer hunt in the Texas hill country. The range conditions were typical, sunny and relatively calm, but the deer hunt involved some scrambling through thick brush and across rocky terrain. I also exposed my rifle to a brief but heavy downpour.
The initial zeroing process was incredibly easy. The one-piece design seemed to hold the scope perfectly in place and dialing in my zero took fewer shots than with my previous setup. The ease of installation was a welcome surprise.
There were no issues during or after the first range session or during the hunt. Everything stayed tight, and there was no noticeable shift in point of impact, even after the rain.
Extended Use & Reliability
After several months of use and approximately 200 rounds downrange, the DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount has held up remarkably well. The finish shows no signs of wear, and the mount remains rock solid. I’ve torqued all the screws periodically to ensure proper tightness.
The mount has proven to be exceptionally durable. I’ve bumped it against trees, scraped it against rocks, and subjected it to temperature fluctuations without any issues. Cleaning is simple, requiring only a quick wipe-down with a lightly oiled cloth.
This mount outperforms my previous setup in every way. Scope slippage is a thing of the past, and I have complete confidence in my rifle’s zero. The increased accuracy and peace of mind are well worth the investment.
Breaking Down the Features of DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount
Specifications
- The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount is designed for Browning A-Bolt rifles with a super short action. This ensures a perfect fit and optimal performance.
- It accommodates scopes with a 30mm tube diameter, which is a common size for many modern rifle scopes. This is a versatile size that allows compatibility with a wide variety of scopes.
- The mount is constructed from 6061-T6 Aluminum, known for its high strength-to-weight ratio. This keeps the weight down while ensuring durability.
- The “low” height is designed for scopes with smaller objective lenses, but it’s crucial to check compatibility with your specific scope to avoid clearance issues. Ensure your objective bell doesn’t contact the barrel.
- The mount is designed to be ambidextrous, working for both right and left-handed shooters. This enhances versatility for different users.
- It is a one-piece design, which provides superior rigidity and eliminates potential weak points found in multi-piece systems. This ensures a secure and stable platform for your scope.
These specifications are crucial because they directly impact the stability, accuracy, and overall user experience of the rifle. A properly fitted and durable mount is essential for maintaining zero and achieving consistent results.
Performance & Functionality
The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount excels at its primary job: providing a secure and stable platform for mounting a scope. The one-piece design and precise machining ensure that the scope stays put, even under heavy recoil or rough handling.
The mount’s strength is its simplicity. It’s easy to install and requires minimal maintenance. A slight weakness is the “low” height; larger objective lenses might require a medium or high mount.
It exceeds my expectations. The elimination of scope slippage and the increased accuracy have made this mount an invaluable addition to my rifle.
Design & Ergonomics
The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount boasts a clean and functional design. The 6061-T6 aluminum construction provides a good balance of strength and weight. Its lightweight nature is a significant advantage, especially for hunters who carry their rifles for extended periods.
The mount is exceptionally user-friendly, with a straightforward installation process. There’s virtually no learning curve.
Durability & Maintenance
The high-quality aluminum and robust construction suggest that this mount will last for many years. The anodized finish provides excellent corrosion resistance, further extending its lifespan.
Maintenance is minimal. A quick wipe-down with a lightly oiled cloth after each use is sufficient to keep it in good condition.
Accessories and Customization Options
The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount doesn’t come with any additional accessories. The primary customization option is choosing the appropriate height (low, medium, or high) to accommodate different scope objective lens sizes.
While it’s not directly compatible with accessories from other brands, the 30mm scope tube diameter is a standard size, so you can use virtually any scope that fits that specification.
Pros and Cons of DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount
Pros
- Rock-solid stability eliminates scope slippage and maintains zero, increasing accuracy.
- Lightweight design made from 6061-T6 aluminum minimizes added weight to the rifle.
- One-piece construction provides superior rigidity and simplifies installation.
- Durable anodized finish resists corrosion and wear, ensuring long-lasting performance.
- Easy to install with basic tools, saving time and effort.
Cons
- The “low” height may not be suitable for scopes with large objective lenses.
- Limited customization options beyond scope height.
Who Should Buy DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount?
The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount is perfect for hunters and sport shooters who own a Browning A-Bolt rifle with a super short action and require a reliable, lightweight, and accurate scope mounting solution. This mount is ideal for anyone experiencing scope slippage or seeking to upgrade from a less robust mounting system.
Those with scopes with exceptionally large objective lenses (larger than 50mm) might need to skip this product and opt for a medium or high mount. Also, shooters looking for quick-detach or adjustable mounts might prefer other options.
A must-have modification would be ensuring proper torque settings on the mounting screws to avoid over-tightening.
Conclusion on DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount
The DNZ Products Browning A Bolt Super Short Action 30mm Scope Tube Mount is an outstanding scope mounting solution that delivers on its promises of stability, durability, and ease of use. Its one-piece design and lightweight construction make it a significant upgrade over traditional two-piece mounts.
At a price of $74.95, the value is justified. The elimination of scope slippage and the resulting increase in accuracy are well worth the investment for serious shooters and hunters.
I would personally recommend this mount to anyone looking to improve the performance and reliability of their Browning A-Bolt rifle. Upgrade your mounting system today and experience the difference a solid foundation can make.