Let’s Talk About Evolution Gun Works External Extractor Drilled for SIG 1911
The Evolution Gun Works External Extractor Drilled for SIG 1911 aims to address a common problem with SIG 1911s: extractor failure. Evolution Gun Works (EGW) promises enhanced durability through the use of higher-grade steel. This is a drop-in part, but is drilled to allow for custom fitting by a gunsmith.
I’ve always been meticulous about maintaining my firearms, but my SIG 1911’s original extractor failed prematurely. I needed a robust, reliable replacement that wouldn’t let me down during critical shooting scenarios. The promise of enhanced durability and the ability for custom fitting drew me to the Evolution Gun Works External Extractor Drilled for SIG 1911.
Upon unboxing, the extractor felt substantial, immediately noticeable when compared to the original SIG part. The blued finish was clean and even, suggesting careful manufacturing. Its weight was similar to the original, but the feel of the steel gave the impression of higher quality.
I considered extractors from Wilson Combat and Cylinder & Slide, both reputable names in 1911 parts. I chose the EGW extractor due to its specific compatibility with SIG 1911s and the option for gunsmith fitting. The $43.49 price point also made it an attractive option compared to some of the higher-priced alternatives.
My first impression was positive; this didn’t seem like a cheap aftermarket part. The Evolution Gun Works External Extractor Drilled for SIG 1911 appeared to be a well-made component ready to tackle the issues that plagued my original extractor. I was eager to get it installed and put it through its paces.
Real-World Testing: Putting Evolution Gun Works External Extractor Drilled for SIG 1911 to the Test
First Use Experience
I tested the Evolution Gun Works External Extractor Drilled for SIG 1911 at my local outdoor shooting range. I put it through a series of drills involving rapid firing and different ammunition types. The weather was dry and sunny, ideal for shooting.
The EGW extractor performed flawlessly from the first shot. Ejection was consistent and strong, with no failures to extract. I ran approximately 200 rounds through the pistol during this initial session.
Installation was straightforward, though the custom fitting might be needed to get the most optimal use of the product. A gunsmith can do so easily as EGW provides a pre-drilled part to facilitate installation. Post installation, the extractor held up admirably with no malfunctions.
Extended Use & Reliability
After several months of use and approximately 1000 rounds fired, the Evolution Gun Works External Extractor Drilled for SIG 1911 continues to perform reliably. There are no signs of wear or cracking. Ejection remains consistent.
The blued finish shows only minor signs of wear around the edges, which is expected with regular use. Cleaning the extractor is simple, requiring only a brush and solvent. I typically clean it after each range session along with the rest of the pistol.
Compared to my previous experience with the SIG factory extractor, the EGW product is a significant improvement. It inspires confidence in the pistol’s reliability, which is crucial for self-defense or competition. I previously faced multiple failures to extract, and this Evolution Gun Works External Extractor Drilled for SIG 1911 eliminates these concerns, so far.
Breaking Down the Features of Evolution Gun Works External Extractor Drilled for SIG 1911
Specifications
- Manufacturer: Evolution Gun Works. A well-known company specializing in high-quality firearm parts.
- Finish: Blued. This provides a protective coating and a classic aesthetic.
- Fabric/Material: Steel. Ensuring strength and resistance to wear.
- Gun Model: SIG Sauer 1911. Specifically designed for compatibility with all SIG 1911 models.
- Additional Features: Drilled. This allows for precise fitting by a gunsmith to optimize performance.
These specifications are critical for reliable performance. The tool steel ensures the extractor can withstand the stresses of repeated firing. The drilled feature enhances the potential for perfect custom fitting, thus improving extraction rates.
Performance & Functionality
The Evolution Gun Works External Extractor Drilled for SIG 1911 excels in its primary function: extracting spent casings. Ejection is consistent and forceful, eliminating the stove-piping malfunctions. Reliability is greatly increased over the factory extractor.
The extractor’s strength ensures positive engagement with the cartridge rim, even with varying ammunition types. Its main strength is its robust construction. The potential need for gunsmith fitting could be a weakness for some users, but EGW made it pre-drilled, so the gunsmith’s work is easier.
It has exceeded my expectations. The enhanced reliability has transformed my SIG 1911 from a range toy into a dependable firearm. My confidence in its performance has been restored.
Design & Ergonomics
The EGW extractor’s design closely resembles the factory part, ensuring seamless integration with the SIG 1911. Its weight is nearly identical, so there is no change in the pistol’s balance. The blued finish complements the pistol’s overall aesthetics.
Installation is straightforward for anyone familiar with 1911 disassembly. The drilled feature allows a gunsmith to fine-tune the fit for optimal extraction. The design is simple, but effective and elegant.
Durability & Maintenance
The Evolution Gun Works External Extractor Drilled for SIG 1911 is constructed from tool steel, making it extremely durable. It is designed to withstand thousands of rounds without failure. Proper care will ensure years of reliable service.
Maintenance is simple; clean the extractor with solvent and a brush after each range visit. Periodic inspection for wear or damage is recommended. The EGW extractor is a robust unit; minor wear can be ignored for a very long time.
Accessories and Customization Options
The Evolution Gun Works External Extractor Drilled for SIG 1911 does not come with any additional accessories, but requires the pin and spring sold separately. It can be used with any standard SIG 1911.
Since this is a drop-in replacement part, it is compatible with all other standard 1911 components. You don’t need other modifications. It functions seamlessly with the original firing pin and recoil spring.
Pros and Cons of Evolution Gun Works External Extractor Drilled for SIG 1911
Pros
- Significantly increased reliability compared to the factory SIG extractor.
- Durable tool steel construction ensures long life and consistent performance.
- Drilled design allows for precise fitting by a gunsmith, optimizing extraction.
- Direct drop-in replacement for all SIG 1911 models, easing installation.
- Affordable price point compared to other high-end extractors.
Cons
- Requires separate purchase of pin and spring (sold as a set).
- May require gunsmith fitting for optimal performance, adding to overall cost.
Who Should Buy Evolution Gun Works External Extractor Drilled for SIG 1911?
The Evolution Gun Works External Extractor Drilled for SIG 1911 is perfect for SIG 1911 owners experiencing frequent extraction failures. It is an upgrade which ensures your gun continues to function. It is also ideal for competitive shooters who need a robust and reliable extractor.
Anyone prioritizing absolute reliability in their SIG 1911 should purchase this. Home defense users who can’t have failures can also purchase this. Owners who want to improve their firearm’s overall performance should also consider this.
If you are content with the factory extractor’s performance, you may want to skip this product. Also, inexperienced owners who are intimidated by the potential need for gunsmith fitting might want to consult a professional.
A new extractor pin and spring are must-have accessories. Also, depending on your skill level, gunsmith services are critical. This is a straightforward part, but careful and correct installation is paramount.
Conclusion on Evolution Gun Works External Extractor Drilled for SIG 1911
The Evolution Gun Works External Extractor Drilled for SIG 1911 is a worthwhile investment for SIG 1911 owners seeking enhanced reliability. Its durable construction and potential for custom fitting make it a superior alternative to the factory extractor. The upgrade greatly impacts extraction reliability.
The $43.49 price is justified by the improved performance and longevity. The extractor is priced competitively within the market. The price is especially reasonable considering the low quality of the original extractor and the EGW extractor’s high quality.
I would personally recommend the Evolution Gun Works External Extractor Drilled for SIG 1911 to anyone experiencing extraction issues with their SIG 1911. Its enhanced durability and potential for custom fitting make it a worthwhile upgrade. Invest in your firearm’s reliability and order the Evolution Gun Works External Extractor Drilled for SIG 1911 today.