Let’s Dive into Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution
The Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution is designed to provide an easy and reliable way to halt your progressive reloading press in case of an issue. Manufactured by Mark 7 Reloading, it promises to add a layer of safety and control to your reloading process.
I was constantly facing situations where I needed to quickly stop my Dillon 650 during a run due to a misfeed or powder issue. Fumbling for the power switch while components were potentially spilling was a real pain. The advertised responsiveness of the remote stop seemed like the perfect solution to this problem.
Upon receiving the Mark 7 Reloading Remote Stop, my initial impression was positive. The brushed steel finish gave it a robust and professional feel. It definitely appeared more substantial than some of the DIY stop solutions I’d seen online.
While other options exist, like simply using a standard power strip with an easily accessible switch, they lack the dedicated functionality and refined design of the Mark 7. I also considered an emergency stop button wired directly into the press’s motor, but that required significantly more electrical know-how than I possessed. The Mark 7 promised a simple, plug-and-play installation.
I was excited to install and test the Mark 7 Reloading Remote Stop. I was hopeful that it would provide the responsiveness and control I needed to avoid costly mistakes and maintain a safer reloading environment.
Real-World Testing: Putting Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution to the Test
First Use Experience
I tested the Mark 7 Reloading Remote Stop in my home reloading setup, which consists of a Dillon 650 press powered by a Mark 7 Evolution. The press is typically used for reloading 9mm and .223 ammunition. Installation was straightforward; simply plugging the press into the stop’s control box and the control box into the power outlet.
The remote stop performed flawlessly under dry conditions. A single press of the red button immediately halted the press’s operation. This responsiveness was precisely what I had hoped for.
The first time I used the Mark 7 Reloading Remote Stop, I was loading 9mm and experienced a primer flip. The immediate stop prevented powder spillage and potential double-charging, saving time and components.
Extended Use & Reliability
After several weeks of regular use, the Mark 7 Reloading Remote Stop continues to function reliably. It has provided a consistent level of performance.
I haven’t noticed any signs of wear and tear on the remote stop itself. The brushed steel enclosure appears durable and resistant to damage.
Cleaning the remote stop is simple; a quick wipe with a dry cloth is all that’s needed. The electrical connections remain secure and free from corrosion. It requires practically no maintenance.
Previously, I relied on manually switching off the press at the power strip. The Mark 7 significantly outperforms that method, offering a much faster and more controlled stop. It’s a significant improvement in safety and efficiency.
Breaking Down the Features of Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution
Specifications
- The Mark 7 Reloading Remote Stop is designed to work with Mark 7 Evolution and Dillon 650/750/1050 progressive reloading presses. This ensures broad compatibility with popular reloading setups.
- The housing material is steel, providing durability and a quality feel. The steel construction ensures long-term reliability and resistance to wear.
- It features a red stop button for easy identification and activation. This allows for quick and intuitive operation in emergency situations.
- The remote stop includes a 6-foot cable, offering flexible placement on the reloading bench. This provides convenient access to the stop button without requiring you to be directly next to the press.
- The product color is black, blending seamlessly with most reloading equipment. The black finish also contributes to a professional and clean aesthetic.
Performance & Functionality
The Mark 7 Reloading Remote Stop performs its job admirably: stopping the reloading press instantly. This rapid response is crucial for preventing component waste and potential hazards.
The main strength is its responsiveness; the press stops almost instantly upon pressing the button. One weakness, though minor, is the lack of adjustable sensitivity; a harder press may sometimes be required to initiate the stop.
The Mark 7 meets expectations. It is a reliable and effective remote stop for progressive reloading presses.
Design & Ergonomics
The brushed steel enclosure of the Mark 7 Reloading Remote Stop provides excellent build quality and feels substantial. The weight adds to its stability on the bench.
It’s user-friendly, requiring no special training or technical knowledge to operate. Plug-and-play installation makes it accessible to reloaders of all skill levels.
Durability & Maintenance
The steel construction suggests it will last for years with proper care. It is built to withstand the rigors of a reloading environment.
Maintenance is simple: keeping it clean and ensuring secure electrical connections. It requires very little ongoing attention.
Accessories and Customization Options
The Mark 7 Reloading Remote Stop comes with a 6-foot cable, providing ample reach for most reloading bench setups. There are no advertised customization options.
Due to its straightforward electrical design, it should be compatible with aftermarket extension cables if needed. This allows for further customization of the button’s placement.
Pros and Cons of Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution
Pros
- Instant stop function prevents component waste and potential hazards.
- Durable steel construction ensures long-term reliability.
- Easy plug-and-play installation requires no special skills.
- 6-foot cable provides flexible placement options.
- Compatible with Dillon 650/750/1050 and Mark 7 Evolution presses.
Cons
- No adjustable sensitivity on the stop button.
- Limited customization options.
Who Should Buy Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution?
Perfect for reloaders who prioritize safety and efficiency when using progressive reloading presses. It’s particularly useful for those who frequently reload high volumes of ammunition.
Those who should skip this product are reloaders who primarily use single-stage presses. The Mark 7 Remote Stop is not necessary for single-stage operation. Also, reloaders on a tight budget may find cheaper, albeit less refined, alternatives.
A must-have accessory would be a dedicated surge protector to further safeguard the press and remote stop from power fluctuations. It’s a worthwhile investment for protecting your reloading equipment.
Conclusion on Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution
The Mark 7 Reloading Remote Stop For 650/750/1050 and Evolution is a well-built and effective accessory that significantly enhances safety and control when using progressive reloading presses. Its instant stop function can prevent costly mistakes and potentially dangerous situations.
At $54.59, the price is justified considering the peace of mind and potential savings it offers. It’s a worthwhile investment for serious reloaders.
I would personally recommend the Mark 7 Reloading Remote Stop to anyone using a Dillon 650/750/1050 or Mark 7 Evolution press. It’s a simple yet powerful tool that will undoubtedly improve your reloading experience. Enhance your reloading setup today with the Mark 7 Reloading Remote Stop and experience the difference!