Let’s Talk About TacFire Glock Slide with Cover Plate
The TacFire Glock Slide with Cover Plate is a compelling option in the crowded aftermarket Glock slide market. It’s a Gen 2/3 Glock 26 compatible slide, also fitting P80 frames, offering a blend of functionality and affordability that’s hard to ignore.
I’d been wanting to build out a dedicated RMR-equipped Glock 26 for a while, but didn’t want to spend a fortune. The factory Glock slides are pricey, and some of the aftermarket options are just too “tacticool” for my taste.
Upon unboxing, the TacFire Glock Slide with Cover Plate felt solid, with a reassuring heft. The graphite black Cerakote finish appeared even and well-applied, while the machining seemed clean and precise.
Compared to other slides I considered, such as those from Zaffiri Precision (too expensive) and Brownells (lacked the specific features I wanted), the TacFire offered a good balance. It had the RMR cut I needed without the excessive porting or aggressive styling I didn’t.
My initial reaction was cautiously optimistic. The price was right, the features were there, but I was a little skeptical about long-term reliability, given the lack of widespread reviews.
Real-World Testing: Putting TacFire Glock Slide with Cover Plate to the Test
First Use Experience
I tested the TacFire Glock Slide with Cover Plate at my local outdoor range. The slide was installed on a Polymer80 PF940SC frame with a Glock 26 barrel and internal parts kit.
The initial range session was in relatively dry, sunny conditions. The slide cycled smoothly, feeding and ejecting rounds without any hiccups.
I did notice that the tolerances felt a little tighter than a factory Glock slide; it took a few magazines to fully break in.
Extended Use & Reliability
After several hundred rounds over the course of a few months, the TacFire Glock Slide with Cover Plate has proven to be surprisingly reliable. There are no significant signs of wear and tear on the slide or the Cerakote finish.
Cleaning and maintaining the slide is straightforward. Standard gun cleaning solvent and lubrication are sufficient.
Compared to previous experiences with aftermarket slides, the TacFire has held up better than expected. It’s not as refined as a high-end slide, but it performs admirably for the price.
Breaking Down the Features of TacFire Glock Slide with Cover Plate
Specifications
The TacFire Glock Slide with Cover Plate is designed for Glock 26 Gen 2 and Gen 3 compatibility, as well as Polymer80 PF940SC frames. It’s chambered in 9mm and is machined from 416R stainless steel for enhanced strength and durability.
The slide features a graphite black Cerakote finish for corrosion resistance. An RMR optic cut allows for easy mounting of Trijicon RMR pattern red dot sights. The slide cover plate and screws are included.
The 416R stainless steel is crucial for durability, and the Cerakote finish significantly enhances resistance to wear and tear. The RMR cut provides essential versatility for modern shooters.
Performance & Functionality
The TacFire Glock Slide with Cover Plate performs its core function admirably, providing reliable cycling and consistent accuracy. It allows for quick target acquisition when paired with a quality RMR optic.
The slide’s primary strength is its reliable cycling and accurate performance. A potential weakness is that tighter tolerances may require a slight break-in period.
The TacFire Glock Slide with Cover Plate meets my expectations for a budget-friendly RMR-cut slide. It offers great performance for the price.
Design & Ergonomics
The TacFire Glock Slide with Cover Plate has a simple, functional design without unnecessary frills. The slide is well-machined and the Cerakote finish is evenly applied.
The slide’s weight is comparable to a factory Glock slide, providing a balanced feel. There’s a minimal learning curve, as it installs and functions like a standard Glock slide.
Durability & Maintenance
The 416R stainless steel construction and Cerakote finish suggest the TacFire Glock Slide with Cover Plate should last for many years with proper care. Maintaining the slide is simple. Clean and lubricate regularly to prevent corrosion and ensure smooth operation.
Accessories and Customization Options
The TacFire Glock Slide with Cover Plate comes with a slide cover plate and screws. The most obvious customization option is the addition of a Trijicon RMR or compatible red dot sight.
The slide is compatible with standard Glock 26 internal parts, barrels, and recoil springs, opening up a wide range of customization possibilities.
Pros and Cons of TacFire Glock Slide with Cover Plate
Pros
- Affordable price point for an RMR-cut slide.
- Durable 416R stainless steel construction.
- Corrosion-resistant Cerakote finish.
- Compatible with Gen 2/3 Glock 26 and P80 frames.
- Simple, functional design without excessive embellishments.
Cons
- Tighter tolerances may require a break-in period.
- Channel liner is not included or installed.
Who Should Buy TacFire Glock Slide with Cover Plate?
The TacFire Glock Slide with Cover Plate is perfect for budget-conscious Glock enthusiasts looking to build a custom RMR-equipped pistol. It is also ideal for hobbyists who want an affordable way to experiment with different configurations.
Those seeking a drop-in, ready-to-go solution with the highest level of refinement might want to skip this product. You may prefer to look at more expensive options with pre-installed components and tighter tolerances.
A must-have accessory is a quality Trijicon RMR or compatible red dot sight. You should also ensure you have a channel liner tool for installation.
Conclusion on TacFire Glock Slide with Cover Plate
The TacFire Glock Slide with Cover Plate offers excellent value for the money. It provides a durable, functional, and affordable foundation for building a custom RMR-equipped Glock 26.
The price is absolutely justified, given the materials, features, and overall performance. I would definitely recommend the TacFire Glock Slide with Cover Plate to anyone looking for a budget-friendly RMR-cut slide.
If you’re looking to build your own custom Glock, don’t overlook the TacFire Glock Slide with Cover Plate. It’s a solid performer that won’t break the bank!