Let’s Talk About Glock Locking Block Pin, Does Not Fit G36/42/43
The Glock Locking Block Pin, Does Not Fit G36/42/43 is a small but critical component of the Glock pistol platform, responsible for securing the locking block within the frame. Manufactured by Glock, this OEM part is designed to ensure the safe and reliable function of most Glock models, excluding the G36, G42, and G43. Its simplicity belies its importance, as a damaged or worn locking block pin can lead to serious malfunctions.
As a seasoned armorer and range instructor, I’ve seen firsthand the consequences of neglecting seemingly minor parts like this. During a particularly busy training weekend, I noticed a student’s G19 exhibiting unusual slide behavior. Upon inspection, the locking block pin was visibly bent, preventing the slide from fully cycling.
I chose this particular Glock Locking Block Pin, Does Not Fit G36/42/43 as a replacement because I always prefer to use factory OEM parts when available. After all, Glock designed their firearms to work optimally with Glock components. This seemed preferable to aftermarket options of questionable quality.
Upon receiving the pin, I immediately inspected it for any defects. It appeared to be a standard, well-machined Glock part, indistinguishable from the original. No, I wasn’t overwhelmed with excitement, but I was confident I had the right replacement.
Real-World Testing: Putting Glock Locking Block Pin, Does Not Fit G36/42/43 to the Test
First Use Experience
I installed the Glock Locking Block Pin, Does Not Fit G36/42/43 in the student’s G19 at the range. Installation was simple and straightforward, requiring only a punch and a few minutes of my time. After the installation, I had the student fire several magazines to verify the repair.
The gun ran flawlessly. There were no malfunctions, and the slide cycled smoothly. The simple pin restored the pistol to reliable operation.
Extended Use & Reliability
Over the following weeks, I continued to observe the student’s G19 during training sessions. The replacement Glock Locking Block Pin, Does Not Fit G36/42/43 has performed flawlessly. It shows no signs of wear or deformation.
The locking block pin is an important aspect of the gun’s function. A properly functioning block is essential to maintain functionality.
Breaking Down the Features of Glock Locking Block Pin, Does Not Fit G36/42/43
Specifications
- Manufacturer: Glock
- Finish: Black
- Gun Make: Glock
- Gun Model: Fits All Except G36/G42/G43
- Part Number: SP04368
These specifications are important because they define the pin’s compatibility and origin. The fact that it’s an OEM Glock part ensures it meets Glock’s stringent quality control standards. The black finish matches the aesthetics of most Glock frames.
Performance & Functionality
The Glock Locking Block Pin, Does Not Fit G36/42/43 performs its job perfectly when properly installed in a compatible Glock model. It securely holds the locking block in place, allowing for proper cycling of the slide. It is a small part doing a vital job.
The primary weakness isn’t in the pin itself, but in the user’s potential to install it incorrectly. A bent or damaged pin during installation renders the pin useless. The pin exceeded my expectations, considering its simplicity.
Design & Ergonomics
The design is simple and functional: a straight pin with a smooth finish. Its lightweight design doesn’t add any noticeable weight to the pistol. There isn’t much to say about its ergonomics.
There is no learning curve. If you know how to disassemble and reassemble a Glock, installing this pin is straightforward.
Durability & Maintenance
Assuming it’s installed correctly and not subjected to undue stress (like being repeatedly dry-fired with excessive force), the Glock Locking Block Pin, Does Not Fit G36/42/43 should last for thousands of rounds. Inspecting the pin periodically during cleaning is recommended.
Maintenance is minimal. Just wipe it clean of any debris during routine firearm maintenance.
Accessories and Customization Options
There are no accessories that come with this part. It is a simple replacement pin. There are no customization options for the Glock Locking Block Pin, Does Not Fit G36/42/43.
There are aftermarket locking blocks with slightly different geometry, but this pin is designed to work with the OEM locking block.
Pros and Cons of Glock Locking Block Pin, Does Not Fit G36/42/43
Pros
- Guaranteed compatibility with most Glock models (excluding G36/42/43).
- OEM part ensures factory-standard quality and reliability.
- Simple installation process.
- Inexpensive solution for restoring proper pistol function.
- Essential for maintaining the safe operation of your Glock.
Cons
- Does not fit G36, G42, or G43 models.
- Can be damaged during installation if not handled carefully.
Who Should Buy Glock Locking Block Pin, Does Not Fit G36/42/43?
This Glock Locking Block Pin, Does Not Fit G36/42/43 is perfect for Glock owners who need to replace a damaged or worn locking block pin in their compatible pistols. It’s also a good spare part to have on hand for armorers or serious shooters who perform their own maintenance.
Those who own G36, G42, or G43 models should skip this product. They need the specific locking block pin designed for those models.
A punch and a basic understanding of Glock disassembly are must-haves for installation.
Conclusion on Glock Locking Block Pin, Does Not Fit G36/42/43
The Glock Locking Block Pin, Does Not Fit G36/42/43 is a simple but vital component that ensures the safe and reliable operation of your Glock pistol. The price is more than justified.
I absolutely recommend this OEM Glock part to anyone needing to replace their locking block pin in a compatible model. Don’t risk using inferior aftermarket parts when you can have the genuine article for such a reasonable price. Keep your Glock running smoothly and safely – order your replacement Glock Locking Block Pin, Does Not Fit G36/42/43 today!