Let’s Talk About Precision Reflex Delrin Ring Spacers
The Precision Reflex Delrin Ring Spacers are a seemingly simple, yet potentially crucial, accessory for any shooter utilizing 30mm scope rings and desiring to mount smaller diameter devices. These spacers, crafted by Precision Reflex, provide a cost-effective way to adapt 30mm rings to accommodate flashlights or other accessories that would normally require dedicated mounting solutions. Their split design and recoil shoulder offer ease of installation and secure fitment, making them an intriguing option for those seeking versatility in their scope setup.
I’ve been piecing together a modular rifle setup, and the need to quickly swap between a dedicated IR illuminator and a high-powered white light on my 30mm scope was proving challenging. Dedicated mounts for each light were adding unnecessary weight and complexity. The Precision Reflex Delrin Ring Spacers seemed like a simple, potentially elegant solution to this problem.
Upon receiving the Precision Reflex Delrin Ring Spacers, my initial impression was of their simplicity. The black Delrin material appeared robust, and the split design looked like it would indeed allow for easy installation. The recoil shoulder seemed a thoughtful addition, promising a secure hold. They are lightweight, which is always a bonus in my book.
Compared to using dedicated flashlight mounts (like those from Surefire or Arisaka Defense) or even offset Picatinny rail sections, the Precision Reflex Delrin Ring Spacers offered a much lower profile and potentially lighter weight solution. While dedicated mounts are undoubtedly stronger, the spacers promised a reasonable compromise for accessories that don’t require extreme rigidity. I chose these spacers because I wanted a streamlined, modular solution that didn’t involve adding bulky mounts all over my rifle.
Honestly, I was cautiously optimistic. The concept seemed great, but I had concerns about the long-term durability of Delrin under recoil and whether the split design would truly provide a secure and stable platform. I was hoping they would live up to the promise of versatility and ease of use.
Real-World Testing: Putting Precision Reflex Delrin Ring Spacers to the Test
First Use Experience
My first test of the Precision Reflex Delrin Ring Spacers was at my local shooting range, mounting a small, high-powered flashlight to my AR-15. I tested them under rapid-fire conditions, simulating a tactical scenario where quick target acquisition is critical. The spacers were subjected to the recoil of .223 rounds.
The range conditions were typical: dry, sunny, and with minimal wind. Even with a small amount of heat, they performed excellently and didn’t melt. I’m interested to see how they perform on a particularly hot day. Installation was surprisingly easy. The split design allowed me to simply snap the spacers around my scope tube and then slide the flashlight into place within the rings.
Initially, the light felt secure. After a few magazines, however, I noticed a slight shift in the flashlight’s position within the rings. This slippage was concerning, and I had to tighten the ring screws more than I initially anticipated.
Extended Use & Reliability
After several weeks of use, including a hunting trip and a carbine course, the Precision Reflex Delrin Ring Spacers have shown both strengths and weaknesses. While the initial slippage issue was addressed by carefully torquing the ring screws, I remain somewhat skeptical about their long-term durability under heavy recoil. The extended testing period has confirmed my initial concerns with slippage.
There are no significant signs of wear and tear. The Delrin material seems resistant to scratches and abrasions. Maintenance is minimal; simply wiping them down with a clean cloth is sufficient.
Compared to using dedicated mounts, the spacers offer a significant weight savings and a cleaner profile. However, the dedicated mounts are undoubtedly more secure. For low-intensity applications, the Precision Reflex Delrin Ring Spacers are adequate, but for demanding scenarios, a more robust mounting solution is preferable.
Breaking Down the Features of Precision Reflex Delrin Ring Spacers
Specifications
The Precision Reflex Delrin Ring Spacers are designed to adapt 30mm scope rings to accommodate accessories. They are sold as a pair and constructed from black Delrin material. The overall length of each spacer is .860 inches, with .800 inches extending from the lip to the front edge.
These specifications are crucial for ensuring compatibility with your existing scope rings and accessories. The Delrin material provides a balance of strength and light weight, while the split design facilitates easy installation. The specific dimensions ensure a snug fit within standard 30mm rings.
Performance & Functionality
The primary function of the Precision Reflex Delrin Ring Spacers is to provide a stable platform for mounting accessories on a scope. When properly installed, they accomplish this task reasonably well. The aforementioned slippage issue is a concern, and careful attention to torque is essential.
The Precision Reflex Delrin Ring Spacers meet expectations for simplicity and ease of installation, but fall short in terms of ultimate stability and ruggedness. The key strength is their ability to provide a low-profile and lightweight mounting solution. The main weakness is the potential for slippage under heavy recoil.
Design & Ergonomics
The design of the Precision Reflex Delrin Ring Spacers is straightforward and functional. The black Delrin material is lightweight and appears durable. The split design allows for easy installation without removing the scope from the rifle.
The ergonomic benefits are minimal, as they simply act as a mounting interface. There is no significant learning curve; installation is intuitive. They add virtually no weight to the overall system.
Durability & Maintenance
The Delrin material is known for its resistance to wear and tear. The Precision Reflex Delrin Ring Spacers appear capable of withstanding moderate use. However, the long-term durability under heavy recoil remains a question mark.
Maintenance is simple, requiring only occasional cleaning with a dry cloth. The simple design minimizes the potential for damage or malfunction. No special tools are required for installation or maintenance.
Accessories and Customization Options
The Precision Reflex Delrin Ring Spacers do not come with any additional accessories. They are primarily designed to interface with existing 30mm scope rings and a variety of accessories, such as flashlights, lasers, or red dot sights. Compatibility with various brands depends on the specific dimensions of the accessory being mounted.
There are no specific customization options available for the Precision Reflex Delrin Ring Spacers. Their function is purely utilitarian, providing a simple and effective mounting solution. Experimenting with different torque settings on the ring screws may be necessary to achieve optimal stability.
Pros and Cons of Precision Reflex Delrin Ring Spacers
Pros
- Affordable solution for adapting 30mm scope rings.
- Lightweight design minimizes added weight to the rifle.
- Easy installation thanks to the split design.
- Delrin material provides reasonable durability.
- Offers a low-profile mounting option.
Cons
- Potential for slippage under heavy recoil.
- Not as secure as dedicated mounting solutions.
- May require careful torque adjustments to prevent movement.
Who Should Buy Precision Reflex Delrin Ring Spacers?
The Precision Reflex Delrin Ring Spacers are perfect for casual shooters, hunters who use lower-recoil cartridges, or anyone looking for a lightweight and inexpensive way to mount accessories to their scope. They are also a good option for airsoft or paintball enthusiasts.
Those who should skip this product include serious tactical shooters, law enforcement personnel, or anyone who requires a rock-solid, no-compromise mounting solution for their accessories. High-recoil applications are also not ideal.
A must-have accessory is a high-quality torque wrench to ensure proper ring screw tension. Using thread locker (such as Loctite) can further enhance stability, but use it sparingly and appropriately.
Conclusion on Precision Reflex Delrin Ring Spacers
The Precision Reflex Delrin Ring Spacers offer a budget-friendly and lightweight solution for mounting accessories to 30mm scopes. While they excel in simplicity and ease of installation, their potential for slippage under heavy recoil is a significant drawback. The relatively low price point may make it worth it for some.
The value proposition is decent. At $17.00, they are far cheaper than dedicated mounts. Whether that price is justified depends on your individual needs and tolerance for potential instability.
I would cautiously recommend the Precision Reflex Delrin Ring Spacers for specific applications where weight savings and a low profile are paramount. However, I would strongly advise against using them in high-stress or tactical situations. If ultimate reliability is your top priority, invest in a dedicated mounting solution. Their value lies in ease-of-use.
Give them a try for yourself.