The Hogue Rubber Monogrip Ruger Security Six #87000 Made a Bold First Impression
The Hogue Rubber Monogrip Ruger Security Six #87000 isn’t just another grip; it’s a tactile upgrade that promises enhanced control and a more confident shooting experience. Designed specifically for the Ruger Security Six revolver, this Hogue Monogrip replaces the factory grips with a form-fitting, rubberized solution. Its promise of improved ergonomics and recoil absorption immediately piqued my interest, as the original grips on my Security Six always felt a little… lacking.
My Ruger Security Six has been a trusted companion for years, primarily for home defense and occasional range trips. The factory grips, while functional, never provided the secure, comfortable hold I desired, especially during rapid firing or in less-than-ideal weather conditions. I was seeking a grip that would improve my purchase, reduce felt recoil, and ultimately enhance my shooting accuracy and confidence. I’d considered the Pachmayr Gripper, a popular choice, and even some custom wood grips, but the Hogue Rubber Monogrip Ruger Security Six #87000 stood out due to its reputation for durability, affordability, and the proven track record of Hogue grips in general.
The Hogue Rubber Monogrip Ruger Security Six #87000 arrived neatly packaged, new in box. My first impression was that the rubber felt substantial and grippy without being abrasive. The finger grooves were prominent but not overly aggressive, suggesting a comfortable and secure hold. The grip felt lighter than I expected, which was a welcome surprise. It felt like an improvement over the factory grip immediately.
Compared to the sleek lines of custom wood grips, the Hogue grip sacrifices aesthetics for practicality. Other options exist, but the Hogue Rubber Monogrip Ruger Security Six #87000 offered the best balance of cost and function. I was genuinely excited to install the grip and test it out at the range. It looked and felt very promising.
Real-World Testing: Putting Hogue Rubber Monogrip Ruger Security Six #87000 to the Test
First Use Experience
My initial test of the Hogue Rubber Monogrip Ruger Security Six #87000 took place at my local outdoor shooting range. The weather was typical for late spring: slightly humid with a light breeze. I ran through a few hundred rounds of .38 Special and .357 Magnum ammunition to get a feel for the grip under different recoil conditions.
The difference was immediately noticeable; the rubber absorbed a significant amount of recoil, particularly with the .357 Magnum rounds. The finger grooves provided a secure and comfortable hold, allowing for better control and faster follow-up shots. The grip never felt slippery, even with slightly sweaty hands, and the recoil was noticeably less punishing than with the factory grips. No issues or surprises.
Extended Use & Reliability
After several months of regular use, the Hogue Rubber Monogrip Ruger Security Six #87000 continues to perform flawlessly. There are no signs of wear and tear, despite being exposed to various weather conditions and frequent handling. The rubber hasn’t cracked, faded, or become sticky, which is a testament to the quality of the material.
Maintaining the grip is incredibly easy; a simple wipe-down with a damp cloth is usually all it takes to remove any dirt or grime. Compared to my previous experiences with aftermarket grips on other firearms, the Hogue Rubber Monogrip Ruger Security Six #87000 has exceeded my expectations in terms of durability and performance. It is simple, reliable, and performs as expected.
Breaking Down the Features of Hogue Rubber Monogrip Ruger Security Six #87000
Specifications
The Hogue Rubber Monogrip Ruger Security Six #87000 is specifically designed for the Ruger Security Six and similar models like the Police Service Six and Speed Six. Its compatibility ensures a snug and secure fit.
The grip is constructed from a durable, synthetic rubber compound known for its resistance to chemicals, oils, and extreme temperatures. This provides a long-lasting and reliable grip.
Weighing only a few ounces, the Hogue Rubber Monogrip Ruger Security Six #87000 adds minimal weight to the firearm. This minimizes bulk.
The grip features molded finger grooves that enhance the shooter’s grip and control. This is particularly important for managing recoil and maintaining accuracy.
The grip wraps around the frame of the revolver. This secures it in place without the need for screws or adhesives, simplifying installation.
These specifications translate to a grip that is comfortable, durable, and provides enhanced control. The minimal weight and ease of installation are added benefits that contribute to the overall user experience.
Performance & Functionality
The Hogue Rubber Monogrip Ruger Security Six #87000 dramatically improves the shooter’s ability to control the Ruger Security Six, especially during rapid firing. The finger grooves and rubber material provide a secure and comfortable hold, even with sweaty hands or in wet conditions.
The grip excels at absorbing recoil, making it more comfortable to shoot heavier loads like .357 Magnum. This reduces fatigue and allows for more accurate follow-up shots. A weakness is that it is only for a specific model of revolver, nothing universal here.
The Hogue Rubber Monogrip Ruger Security Six #87000 meets and exceeds my expectations. It transformed the shooting experience with my Security Six.
Design & Ergonomics
The build quality of the Hogue Rubber Monogrip Ruger Security Six #87000 is excellent; the rubber is dense and durable. The texture provides a secure grip without being abrasive.
The grip’s ergonomic design fits comfortably in the hand, regardless of hand size. There is virtually no learning curve.
Durability & Maintenance
The durable rubber construction of the Hogue Rubber Monogrip Ruger Security Six #87000 ensures that it will last for years with proper care. The rubber resists wear and tear from use and exposure to the elements.
The grip requires minimal maintenance; a simple wipe-down with a damp cloth is usually sufficient to keep it clean. The rubber is resistant to most cleaning solvents.
Accessories and Customization Options
The Hogue Rubber Monogrip Ruger Security Six #87000 doesn’t require any additional accessories for installation or use. It is a self-contained upgrade that replaces the factory grips.
While the grip itself doesn’t offer extensive customization options, its design complements various holster types and other accessories designed for the Ruger Security Six. The Hogue grip is compatible with most speed loaders and ammunition carriers.
Pros and Cons of Hogue Rubber Monogrip Ruger Security Six #87000
Pros
- Significantly improved recoil absorption, making shooting more comfortable.
- Enhanced grip and control due to the rubber material and finger grooves.
- Durable construction ensures long-lasting performance.
- Easy to install, requiring no special tools or modifications.
- Affordable price point offers excellent value for the improvement in shooting experience.
Cons
- The rubber material may not appeal to shooters who prefer the aesthetic of wood or other grip materials.
- The finger grooves are not adjustable and may not perfectly fit every hand size.
Who Should Buy Hogue Rubber Monogrip Ruger Security Six #87000?
The Hogue Rubber Monogrip Ruger Security Six #87000 is perfect for Ruger Security Six owners who prioritize improved control, recoil absorption, and a comfortable shooting experience. It is ideal for both casual target shooters and those who use the Security Six for home defense or duty purposes.
Shooters who prefer the look and feel of wood or other grip materials may want to skip this product. Anyone looking for adjustable finger grooves should look elsewhere.
A must-have modification would be a quality set of sights to match the improvement in control. A good holster would also complement the new grip.
Conclusion on Hogue Rubber Monogrip Ruger Security Six #87000
The Hogue Rubber Monogrip Ruger Security Six #87000 is a worthwhile investment for anyone seeking to enhance the shooting experience with their Ruger Security Six. It delivers on its promise of improved control, recoil absorption, and durability at an affordable price.
The $29.99 price is absolutely justified. The improvement in comfort and control is well worth the cost.
I wholeheartedly recommend the Hogue Rubber Monogrip Ruger Security Six #87000 to any Security Six owner looking for a practical and effective upgrade. Upgrade your Security Six today.