Let’s Dive into Strike Industries Mini KingComp
The Strike Industries Mini KingComp is a compact muzzle device designed to mitigate recoil and muzzle rise for .223/5.56 caliber AR-15 platforms. Manufactured by Strike Industries, this compensator aims to deliver the performance of its full-sized counterpart in a smaller, lighter package. The Mini KingComp boasts a single-chamber design with standoff tines, and is even compatible with the Strike Industries Oppressor blast shield.
I was looking for a compensator that would reduce muzzle rise on my AR-15 pistol without adding excessive length or weight. I wanted something that would allow for faster follow-up shots and improved control during rapid firing. The promise of recoil reduction in a compact package drew me to the Strike Industries Mini KingComp.
Upon unboxing, I was immediately impressed by the solid feel and clean finish of the Strike Industries Mini KingComp. The black nitride coating gives it a sleek, durable look, and the steel construction feels robust. Its compact size was also noticeable, making it seem like a worthy upgrade without drastically altering the rifle’s balance.
I considered the SureFire ProComp and the Bravo Company BCMGunfighter compensators before choosing the Strike Industries Mini KingComp. Ultimately, I picked the Mini KingComp because of its smaller size and the unique design of the standoff tines. I also liked the option of pairing it with the Strike Industries Oppressor, allowing me to tailor the muzzle device to the specific shooting environment.
My first impression was positive; I was excited to test the Strike Industries Mini KingComp at the range to see if it lived up to the hype. I was also curious to see how it compared to other muzzle devices I have used in the past.
Real-World Testing: Putting Strike Industries Mini KingComp to the Test
First Use Experience
My initial testing took place at an outdoor shooting range. I used my AR-15 pistol chambered in 5.56mm, engaging targets at distances ranging from 25 to 100 yards. The weather was dry and sunny, providing ideal conditions for testing the Strike Industries Mini KingComp.
The Strike Industries Mini KingComp performed admirably. It significantly reduced muzzle climb, allowing for quicker target re-acquisition after each shot. There was a noticeable reduction in felt recoil compared to the standard A2 flash hider I previously had installed.
The Strike Industries Mini KingComp was easy to install with a crush washer. It took me a few shots to get used to the different recoil impulse compared to the flash hider, but the improved control was immediately apparent. I experienced no issues with installation or initial performance.
Extended Use & Reliability
After several months of use, the Strike Industries Mini KingComp has held up exceptionally well. I’ve put several hundred rounds through my AR-15 pistol with this compensator installed. It’s consistently provided noticeable recoil reduction and muzzle control.
There are no visible signs of wear and tear on the Strike Industries Mini KingComp. The black nitride finish has proven to be durable and resistant to scratches and corrosion. Cleaning is also simple, as carbon buildup wipes away easily with a brush and solvent.
Compared to previous muzzle devices I’ve used, the Strike Industries Mini KingComp stands out for its balance of performance and size. It delivers recoil reduction comparable to larger compensators, without adding excessive weight or length to the firearm. It has definitely exceeded my expectations for a compact muzzle device.
Breaking Down the Features of Strike Industries Mini KingComp
Specifications
The Strike Industries Mini KingComp is designed for .223/5.56 caliber firearms with a 1/2×28″ thread pitch. It measures 58 mm (2.28 inches) in length. The compensator is constructed from 416 stainless steel and finished with a black nitride coating. It is compatible with the Strike Industries Oppressor blast shield.
These specifications are important because they contribute to the overall performance and user experience. The 1/2×28″ thread pitch is the standard for AR-15 platforms, ensuring compatibility. The compact 58 mm length minimizes added weight and length, maintaining maneuverability. 416 stainless steel provides durability and resistance to corrosion. The black nitride coating adds a layer of protection and a sleek finish.
Performance & Functionality
The Strike Industries Mini KingComp excels at reducing muzzle climb and felt recoil. Its single-chamber design effectively redirects gases to counteract upward movement, allowing for faster follow-up shots and improved accuracy. It is also compatible with the Strike Industries Oppressor, which can further reduce felt recoil and muzzle blast.
The Strike Industries Mini KingComp offers great performance. It is however, extremely loud and directs gasses to each side of the shooter.
The Strike Industries Mini KingComp meets my expectations for a compact compensator. It provides noticeable recoil reduction and muzzle control, enhancing shooting accuracy and overall weapon handling.
Design & Ergonomics
The Strike Industries Mini KingComp features a simple, yet effective design. The single-chamber baffle and standoff tines contribute to its recoil-reducing capabilities. The black nitride finish gives it a sleek, professional appearance.
The Strike Industries Mini KingComp is user-friendly. Installation is straightforward, and it requires minimal adjustment. The compact size and lightweight design make it easy to handle and maneuver.
Durability & Maintenance
The Strike Industries Mini KingComp is built to last. The 416 stainless steel construction and black nitride finish provide excellent corrosion resistance and durability. The compensator is easy to clean and maintain, requiring only occasional wiping with a solvent.
Based on my experience, I expect the Strike Industries Mini KingComp to last for many years with proper care. The high-quality materials and durable finish should withstand the rigors of regular use.
Accessories and Customization Options
The Strike Industries Mini KingComp does not come with any additional accessories besides the crush washer. The primary customization option is the compatibility with the Strike Industries Oppressor blast shield. This allows users to reduce muzzle blast and direct sound forward, making it more comfortable for nearby shooters.
The Strike Industries Mini KingComp is compatible with most standard AR-15 accessories, such as rail-mounted lights, lasers, and foregrips. It is designed to work seamlessly with the Strike Industries ecosystem of products.
Pros and Cons of Strike Industries Mini KingComp
Pros
- Significant recoil reduction and muzzle climb mitigation for faster follow-up shots.
- Compact and lightweight design minimizes added bulk and weight.
- Durable 416 stainless steel construction with a corrosion-resistant black nitride finish.
- Compatible with the Strike Industries Oppressor blast shield.
- Easy installation with a standard 1/2×28″ thread pitch.
Cons
- Can be quite loud, especially without the Oppressor.
- Crush washer needs to be replaced after each removal.
Who Should Buy Strike Industries Mini KingComp?
The Strike Industries Mini KingComp is perfect for AR-15 pistol owners and those looking for a compact, effective recoil reducer. It’s also a good choice for competitive shooters who need fast follow-up shots and improved accuracy.
Those who prioritize noise reduction above all else might want to skip this product, especially if they don’t plan to use it with the Strike Industries Oppressor. Also, if you prefer a flash hider over a compensator, this might not be the right choice for you.
A must-have modification would be purchasing the Strike Industries Oppressor to reduce noise and concussion. Also, a quality torque wrench is essential for proper installation and preventing over-tightening.
Conclusion on Strike Industries Mini KingComp
The Strike Industries Mini KingComp is a well-designed and effective compensator that delivers noticeable recoil reduction and muzzle control in a compact package. It’s a great upgrade for AR-15 pistols and rifles, offering improved accuracy and faster follow-up shots. While it can be loud, especially without the Strike Industries Oppressor, its performance and durability make it a worthwhile investment.
The price of $49.95 is justified by the quality of materials, design, and the noticeable improvement in shooting performance. It offers a great value proposition compared to more expensive compensators on the market.
I would personally recommend the Strike Industries Mini KingComp to anyone looking to improve the performance of their AR-15. It’s a simple, yet effective upgrade that will enhance your shooting experience. Upgrade your AR-15 today with the Strike Industries Mini KingComp and experience the difference!