XTS 5mW Brass Finish Laser Bore Sights Review

Let’s Dive into XTS 5mW Brass Finish Laser Bore Sights

Bore sighting has always been a necessary evil for any serious shooter. It is a chore I’ve performed countless times over the past decade, often relying on visual estimations and a lot of wasted ammunition. The XTS 5mW Brass Finish Laser Bore Sights promises a quicker, more efficient method, and for the price, it’s a gamble I was willing to take.

I’ve always been skeptical of budget-friendly bore sighting tools, recalling experiences with flimsy plastic models that did more harm than good. This time, though, the brass finish and compact design of the XTS 5mW Brass Finish Laser Bore Sights piqued my interest. My primary motivation was simple: save time and ammo at the range while dialing in new optics on my AR platform rifles.

Upon unboxing, the first thing I noticed was the weight, giving a sense of quality despite the low price. The brass finish, while perhaps not as rugged as steel, felt surprisingly solid, and the laser aperture appeared well-protected. Initially, I compared this to a couple of older, more expensive bore sights I’ve used: a magnetic attachment model from a well-known brand and a universal collimator. The XTS 5mW Brass Finish Laser Bore Sights seemed less versatile than the universal collimator but infinitely simpler to use than the magnetic type.

My first impression was cautiously optimistic. I was excited by the potential time savings and the compact design. Only real-world testing would determine if the XTS 5mW Brass Finish Laser Bore Sights was a valuable tool or another range bag paperweight.

Check Best Price HERE

Real-World Testing: Putting XTS 5mW Brass Finish Laser Bore Sights to the Test

First Use Experience

I tested the XTS 5mW Brass Finish Laser Bore Sights at an outdoor shooting range on a clear, sunny day. The primary goal was to zero a new red dot sight on my AR-15 chambered in 5.56. Initially, I was concerned about visibility in bright sunlight, but the 5mW red laser was surprisingly visible against a dark cardboard target at 25 yards.

Using the XTS 5mW Brass Finish Laser Bore Sights was straightforward: insert it into the chamber, close the bolt, and observe the laser’s position on the target. No complex adjustments or tools were needed. After making initial adjustments to the red dot based on the laser’s position, my first three shots landed within a 2-inch group.

Extended Use & Reliability

After several range trips spanning a few months, the XTS 5mW Brass Finish Laser Bore Sights has held up surprisingly well. There are no visible signs of wear and tear on the brass finish, despite being tossed into my range bag with other tools. Cleaning is simple: a quick wipe with a clean cloth after each use. Compared to visually bore sighting, this tool has been a significant time-saver, reducing the number of rounds needed to get on paper and fine-tune my optics.

Breaking Down the Features of XTS 5mW Brass Finish Laser Bore Sights

Specifications

The XTS 5mW Brass Finish Laser Bore Sights features a brass finish, providing a decent level of durability for its price point. The laser output is 5mW, sufficient for visibility in various lighting conditions, including bright daylight at shorter ranges. It uses a red beam color with a wavelength of 635 – 655 nm. The package includes batteries.

These specifications are essential because they directly impact the bore sight’s visibility and ease of use. A brighter laser (5mW in this case) is crucial for outdoor use. The brass construction contributes to its longevity compared to cheaper plastic alternatives.

Performance & Functionality

The XTS 5mW Brass Finish Laser Bore Sights performs its primary function – getting you on paper quickly – admirably. The laser is bright enough for daytime use at reasonable distances (25-50 yards). The simplicity of its design ensures ease of use for both beginners and experienced shooters. One notable weakness is the lack of adjustability; if the laser diode isn’t perfectly aligned within the brass housing, your initial bore sight will be off.

It certainly meets expectations, especially given its budget-friendly price. It gets the job done efficiently, saving both time and ammunition.

Design & Ergonomics

The brass construction lends a decent amount of weight to the XTS 5mW Brass Finish Laser Bore Sights. This provides a feeling of quality and durability that’s often lacking in cheaper models. The design is straightforward – a simple cylindrical shape that chambers like a regular cartridge. There’s virtually no learning curve; it’s incredibly user-friendly.

Durability & Maintenance

Given its brass construction, the XTS 5mW Brass Finish Laser Bore Sights should last a reasonable amount of time with proper care. It’s not designed for heavy abuse. Maintenance is minimal – just keep it clean and store it properly to prevent damage.

Accessories and Customization Options

The XTS 5mW Brass Finish Laser Bore Sights is a standalone tool and doesn’t require any additional accessories for basic functionality. There are no customization options available. However, it works with any firearm chambered for the specific caliber it’s designed for. The primary aftermarket consideration would be replacement batteries when the included ones expire.

Pros and Cons of XTS 5mW Brass Finish Laser Bore Sights