REPAIR

I have winchester model 120 20 guage , the gun wont kick shells out , THE ejector does not seem worn but the shell starts to eject but wont. WHATS WRONG?

hello,,i thought i answered this but i'll try again,,it sounds like your useing cheaper feild loads,,and they just don't have enough power to throw the shells out ,,i'd recommend trying a better shotgun shell load ,,maybe try some high brass or high velocity loads and see if theres still a problem,,if it's still not throwing the shells out it may need a good cleaning or your gas port may be clogged or partially clogged ,,after trying different shells if the problem still exists try removeing your barrel and check the small hole inside the ring that fits over the mag tube ,,take a pipe cleaner and clean this hole out and retry it ,,also there are many gun cleaning sprays on the market clean the action and bolt well and this may help also..i really think your problem is the ammo your useing and don't think it's a issue for repairs ..
bigcurt

i had this problem with a winchester my step dad passed to me and found that it was due to the fact that it had sat for a while and needed to be cleaned and oiled i have never had a problem with cheap loads now that it is cleaned and oiled.