receiver
What is the age and the value. In need of a stock.
Thanks, Willie
I have a 30-06 with a stamp on the end of the barrel - SA 7-29 - and a serial on the receiver - US.......380086 - I can't see the rest of the receiver serial because of the scope mount. Any ideas...
...e" made in 1949 that I am valuing for a friend. It has some bluing wear on top of the barrel above the receiver, and the bluing on the receiver, while not bad, looks like it has been touched up a...
My uncle has a pump shotgun made by WesternField and has a model 35 on the side of the receiver. It is a hammerless, and the receiver looks similar to an A-5 Browning.
When you pump it a small blo...
Hi bigcurt
The receiver, barrels, and stock is marked made in Spain. Barrels and receiver not blued. Barrels have green tint to them. Nobel imported these sxs 1953 to 1971. Receiver has a floor p...
I have a Winchester model 94-30 WCF Sieral number 1505443 it has a silver engraved receiver and im trying to find out how much its worth. I been looking at website that sell a similar gun, but have no...
...ks for the information. I gave $100 for it but I was afraid it was one of the guns they made with the alloy receiver. If its that old it would have a steel receiver and is probably a good serviceable ...
...400 but for a year ya need to give us the date code ,,there should be 2-3 letters usually in an oval on the receiver or barrel near where the barrel meets the receiver,,this is how remington dated the...
I have a Stevens single shot 20 ga. On the right side of the receiver, it says "J.STEVENS ARMS COMPANY Chicopee Falls, MASS U.S.A." in the lower corner it says 107B. On the left side of t...
Hello,,Remington used a letter code on there rifles and shotguns usually on the left side of the receiver near where the barrel meets the receiver ,,remingtons site has the dates by useing these codes...
...nyone know the value of a 1996 12ga Browning BPS shotgun with 20 1/2" barrel and invector plus choke.
Receiver is engraved with a Buck on left side with a turkey on right side of receiver. The g...
...these were done in the 50's and it should be marked Famage and a date usually on the right side of the receiver if this is what you have ,,it should also be stamped .30 on the rear bridge of the ...
![]()
Looking for info & poss value; Overall v good,
7mm, 98 action, matching #s on stock ,bolt and receiver. Side of receiver stamped ;
CLSKOSLOVENSKA ZBROJOVKA,A.S.,BRNO
Top has crest & bird i...
serial number should be on the bottom of the receiver..forward where the shells go in or possibly on the left side of the receiver ,,and as the other poster was trying to say.. possibly under the bu...
...he value.I know the gun has been slammed on other forums due to potential insufficient heat teatment of the receiver but I have experienced no problems I'ts really fun to shoot. Accurate enough ...
It has a receiver patent date of "March 16, 1875." It is a 12ga side by side with hammers. On one side the receiver is engraved with waterfowl, the other side has quail. The barrel is stampe...
the receiver ring is the part of the rifle where it should be marked Remington with model 1903a3 ,,looking at the rifle where you would put the cartridge in the chamber to load it the receiver ring is...
need more info please ,,any markings on the top of the receiver or side rail of receiver ,,what caliber ?barrel lenght?military or sporter? bolt action ?serial number? and are the other parts matching...
...e list...Looking for info & poss value; Overall v good,
7mm, 98 action, matching #s on stock ,bolt and receiver. Side of receiver stamped ;
CLSKOSLOVENSKA ZBROJOVKA,A.S.,BRNO
Top has crest &am...
... with a bayonet,,like any markings you can see near or around the bolt aera or above where it goes into the receiver? anythins marked on the sides of the receiver or the barrel?if nothing can you post...
thats really hard to say from the breif description you gave ,,are there any other markings on the receiver or barrel?could be anything from a sporterized mauser to a model 70 winchester ,,need someth...
i have a winchester 94 30/30 with saddle ring and scroll etched in receiver.s/n3879157.it is in excellent condition.can you give an approx value?
![]()
Looking for a manufacture date and approximate value s/n 24288149. Two letter code on barrel near receiver is "JM".
Firearm is in excellent condition
![]()
...he original varnish is mostly gone from the fore end but can't tell for sure. The sight is a Lyman 21 Receiver sight and were quite popular on this model rifle. The rifle is in a "Takedown...
...,,without the scope even with a cutdown stock the value is more than with holes drilled and tapped into the receiver,,after the wars alot of old milsurps were sporterized and became sporting rifles an...
![]()
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 Gun Values Board |
Latest Posts
|

more posts...