| Blogs | Forums | Photo Album |
problems
...oper heat treating of the receiver. About 80 rounds have been fired with the only issue being magazine feed problems.4 mags used /1 misfeed per mag. What are potential problems or should everything be...
I have shot it a few times and have had zero problems with it. Have you owned or shot one that gave you problems?!? I keep it next to the bed loaded, but not closed, for emergency needs. (we have no k...
...ot specific but were first made in 1960 and are still in production to date,,good little semis and not many problems with them other than some ammo isn't really powerful enough for the action to ...
... nice to have a first year production model but many time the first year may have been the year most of the problems were in and as the production went on they improved the flaws ,,not saying there we...
...r said it should be ok ,,should be ok,,but better to be safe than sorry..i really haven't herd of any problems with nagant headspace problems ,,i have owned quite a few of the carbines and all h...
hello,,sorry to have to telll you that it sounds like you have some problems with the barrel on your md 12..if the "bump" is in then a good gunsmith may be able to pop it out,,but if it feel...
You might also put instructions on how to post a picture as I have seen some having problems
its a topper 58 not a 158 thats why i am having problems finding info
I've got one that was made in 2000. Perfect in every way. Never a jam or any other problems in over 3000 rounds through it.
Need to get a reasonable estimate on the value of this rifle. It is in Good - Very Good condition. Health problems so can not hunt any longer.
I have a Ruger .44 Mag carbine that is giving me ejection/loading problems. It attempts to eject a fired round and chamber two rounds in the same action. I'm shooting 240gr. HP at 1600 fps.
...holds 6 even still has the plug. It is in better than average condition all original. fully operational! no problems!...
I have the Model 81 7.65 Beretta. I love the pistol but have also had problems finding extra clips. Jim, did you ever find one? If so, where?
...ure of model. I was wondering if its a decent brand (who really makes it), if they tend to have any certain problems and can it take plenty of rounds before maintenance (I'll be dove hunting).
T...
... to dispose of it because ya never know who may have loaded it and if they did it properly,,can cause major problems ,,i don't think i have ever saw a winchester with a headspace problem,,so it&#...
I have a little Erma/Excam RX22 and i am having problems with the trigger. When you pull the trigger it will not set back, it just stays in the fired position. Can anyone help me out with a schematic ...
...ould have to be in pretty darn good condition, good case colors and all. If it's brown with some wood problems it's an 8-900 gun....
as far as I know you cant buy a sks in california,But you should be able to buy the enfeild no problems
...you'ld be best served to check out this site,
http://www.smith-wessonforum.com/
if you have any problems accessing the site let me know.
Kim...
...there values well and your's in excellent con..should be in the 400-600 range,,and shouldn't be a problems in a private sale ,,a gundealer will proably try and offer ya 250-275 for it mabey ...
hello ,,sounds like ya got a real problem child there ,,i think if i bought it new and was having the problems your having ..i'd be on winchester untill they made it right,,but i don't know ...
.... yes, ive tried All types of .308 bullets, and grain sizes the 150 sst worked best for me. i dont have any problems with other types, but this woked best for me, the rifle was a tc encore, with a wea...
hello the model 30 replaced the 24 which replace the 98,,all were basically the same ,,there were problems with bolt lockup on the earlier models so each one had improved bolts,,it was made in 4 grade...
...ammed on other forums due to potential insufficient heat teatment of the receiver but I have experienced no problems I'ts really fun to shoot. Accurate enough with iron sights to shoot 6 inch gr...
... you have any input, I'd appreciate it. The gun is in pretty good condition, a few scratches, not many problems. Has capability for adjustable barrel weights, and has a gold trigger, faded inlaid...
...refinishing. You might look at the blog I did on a Model 1873. The wood had been done and you can see the problems if you enlarge the photos.
I'll be in touch next week.
2bit...
...n " Execellent " condition with really nice grain in the stock
The crown on barrel is good / No problems
How do I tell if it's a adt or bdt model ??
All the barrel says is "...
...em and it functions properly then it may value a little higher to a collector if it doesn't have major problems with the finish like pitting or rust,,or major dings and dents .. also there were ...
The Content on this site is provided for general information purposes only. It can not and should not be a substitute for face-to-face professional advice. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2009 Gun Values Board |
Latest Posts
|
more posts...